HUANANZHI H610M-PLUS PC Motherboard User Manual

HUANANZHI H610M-PLUS PC Motherboard

Product Information

The HM-PLUS is a motherboard produced by SZ Huanan Sanxian Technology Co., Ltd. It supports ESD protection and comes with various features such as DDR RAM, SATA, I/O ports, Realtek LAN, and audio drivers. It has an LGA CPU socket and supports multiple M.2 slots for WiFi and NVME PCIe. It also has USB and PCIex slots for external devices.

Product Usage Instructions

Before assembling the computer, it is important to take note of the following safety precautions:

• Prevent electrostatic discharge (ESD) by following proper assembly procedures.

• Ensure all parts are firmly connected to avoid component
  recognition failure or computer startup failure.

• Avoid placing anything on the power cord or stepping on it.

When purchasing the product, make sure to confirm that the motherboard is properly packaged and there is no damage or lack of accessories. Follow the steps below to install and set up the product:

1. Connect all necessary components to the motherboard such as DDR RAM, SATA drives, and I/O ports.
2. Install Realtek LAN and audio drivers for optimal performance.
3. Access the BIOS settings to configure the system overview, advanced settings, chipset, boot, security, and exit options.

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a success-ful computer assembly.
• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
• Place the power cord where it will not be stepped on. Do not place anything on the power cord.
• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
• Please put the motherboard in an anti-static container or on anti-static pad if not needed.
• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
• If you need any assistance in the process of installation.
• please contact our after-sales customer service or reach us on HUANANZHI official E mail: business@huananzhi.com for professional technical support.
• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
• Keep the motherboard away from moisture.
• Keep the user manual for future reference.
• Before plugging the power supply, please make sure the socket provides the corresponding voltage.
• In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
• In the event of any of the following conditions, have the board checked by a service technician:
• Liquid penetrated into the computer.
• The motherboard is exposed to moisture.
• Motherboard does not work even it you follow the instructions on user manual.
• Motherboard fell off to the ground and got damaged.
• Motherboard has clear signs of damage.

PACKING

• Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as possible.
• HUANANZHI H610M-PLUS Motherboard
• SATA data cable
• 1/O shield back plat
• Warranty card

BRIEF INTRODUCTION

Features

• CPU: Intel ® 12th13th Generation LGA1700 processor i3/5/7 Intel ® Core ™M
  • Intel ® 12th13th Generation LGA1700 processor Intel ® Xeon ™
  • Intel ® 12th13th Generation LGA1700 processor Intel ® Pentium™
• RAM: 2* DIMM RAM SLOT supports up to 64GB DDR4 (Support for overlocking)
  • 3200/2666/2400/2133MHZ Non-ECC memory
  • Two-Channel Memory Architecture
  • Actual memory data rate depends on CPU type and DRAM module
• 1/O effects: 3 x SATA3.0 (maximum transfer speed up to 6GB/S)
  • 4 x USB2.0 interface
  • 2x USB3.2 ports
  • 1 x PS/2 Mouse and Keyboard port
  • 1 x RJ45 Network card interface
  • 2 x HDMI-Compatible
  • 1 x VGA+DP interface
• Audio: Realtek Audio Transcoder
  • Realtek 5.1 Channel High Fidelity Audio
• Audio output: Front Out/Front Speaker Out
• Audio input: Microphone input, Audio input
• Ethernet: 1 x Realtek PCle Gigabit LAN
• Expansion slot: 1 x PClex16 5.0
  • 2 x PClex1 3.0
  • 1 x M.2 NVME PCle 3.0X4 (key M)2260/2280
  • 1 x M.2 NGFF SATA3.0
  • 1 x M.2 WIFI(Support NGFF/CNVI)

MOTHERBOARD IMAGE

H610M-PLUS Motherboard Illustration

Rear I/O Panel

Installation And Settings

NOTICE

please check the motherboard where all pins marked with the number “1” or a white bold line are position “1”

To properly place the CPU in the motherboard,the Cpu base of the LGA1700 motherboard has two salient points and a golden triangle indicator.Golden triangle indicates Pini.

CPU Installation

1. Remove the screw from the screw base
2. Remove the screw base
3. Tighten the screw base screwed into the length M.2 module to the M.2 interface distance hole
4. Insert your M.2 module into the M.2 interface at a 30-degree angle
5. Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base

M.2 Interface Installation

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding posi- tion of the slot to determine the direction of installation.
2. Align the memory module into the slot and press
3. Let the snaps on both ends of the slot automatically bounce

Memory Installation

1. Use a screwdriver to remove the bezel and screws on the main unit
2. Need to pick up the card slot of the card slot when installing the graphics card
3. Insert the graphics card into the card slot of the graphics card
4. After the installation is in place, the chuck will automatically return to its position.
5. Secure the graphics card to the chassis with screws
6. Install the power cord

Graphics Card Installation

Drivers installation

Drivers listing:

Intel Chip Information Installation

• Run “Control Panel – System – Hardware – Device Manager” Click the right mouse button to change the driver’s hardware device and proceed with the installation below:
• Option: Propertyl – Update driver – Not connect to Internet –
• Manually installation
• Find the corresponding directory
• Select “Next step”

Audio driver installation

• Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for installation.

Audio driver installation (take HD Audio series for example)

• Run “driver installer”: 879Audio.rar Audio\ Realtek\windows10-11/ 9239_FF00_PG478_Win10_RS4_RS5_19H1_20H1_Win7_WHQL/ Setup.exe
• Click on “next”to continue and then”finished”
• The system will automatically restart itself to finish the installation

Uninstallation of audio driver (take HD Audio series for example)

• getting into Windows desktop, choose “setting”/ “control”,and then “add/remove programs”. Later, choose “Realtek High Defini- tion Audio Driver” in the menu and click on ” add/remove”so thatthe driver will be automatically removed.

Driver installation of external video card

• Run “driver installer”, take Setup.exe, Click on next yes
• next”
• next”and”finished”h
• The system will automatically search for devices to complete the installation

Driver installation of network

• Run “driver installer™”: H610M-PLUS LAN/Install_Win10_1001 05292015.exe click on “next”. installation”. “finished”and restart the computer and restart the computer, The system will automatically search for devices to complete the installation.

BIOS Settings

• In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS
• SRAM of the motherboard. When the computer is shut down, the motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press
• Delete/Del” key to enter into AMI BIOS CMOS SETUP main page.
• The motherboard warm boot key is “F7”.
• Menu: please pay attention to every option in the settings menu.
• When there is a triangle-shaped symbol on the left side of the menu, it means that you choose this sub-menu, so a pop-up sub-menu will be available.

Main Menu Function

• Main Advanced Chipset Boot Security Save Exit
• Main
• System Overview
• Date/Time settings, HDD specs/Monitor type settings.
• Advanced
• Advanced Settings
• BIOS special function settings, such as virus alert, booting disk priority, etc.
• Chipset
• Advanced Chipset Settings
• Overclocking
• Memory XMP Profile
• Boot
• Boot Settings
• Security
• Security Settings
• Save
• Save Setting
• Exit
• Exit Options
• Exit settings include a loading of optimized defaults value/ loading of fail-safe defaults! discarding changes/ exiting without saving. Exit settings include a loading of optimized defaults value/ loading of fail-safe defaults/discarding chang- es/ exiting without saving.
• SZ HUANAN SANXIAN TECHNOLOGY CO., LTD.
• WWW.HUANANZHI.COM

Documents / Resources

| HUANANZHI H610M-PLUS PC Motherboard [pdf] User Manual
H610M-PLUS, H610M-PLUS PC Motherboard, PC Motherboard, Motherboard
---|---

References

• 华南金牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>