HUANANZHI B250M-I Motherboard User Manual

: June 10, 2024
: HUANANZHI

Table of Contents

HUANANZHI® B250M-I Motherboard User Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUANANZHI® B250M-I Motherboard User Manual

B250M-I Cover Page

SAFETY PRECAUTIONS

Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a successful computer assembly.
Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
Please put the motherboard in an anti-static container or on anti-static pad if not needed.
Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
If you need any assistance in the process of installation, please contact our after-sales customer service or reach us on HUANANZHI official E-mail: business@huananzhi.com for professional technical support.
Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
Keep the motherboard away from moisture.
Keep the user manual for future reference.
Before plugging the power supply, please make sure the socket provides the corresponding voltage.
In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
In the event of any of the following conditions, have the board checked by a service technician:
Liquid penetrated into the computer.
Motherboard is exposed to moisture.
Motherboard does not work even if you follow the instructions on user manual.
Motherboard fell off to the ground and got damaged.
Motherboard has clear signs of damage.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as possible.

1.1HUANANZHIB250M-I motherboard
2.1 SATA data cable
3.1 User manual
4.1Warranty Card

BRIEF INTRODUCTION

Features

CPU: Intel ® LGA1151 processor 6’h 7th gth gth Intel ® Core ™

RAM:

2* DIMM supports up to 16GB DDR3
1866/1600/1333MHZ Non-ECCmemory, Notebook memory
Two-Channel Memory Architecture
Actual memory data rate depends on CPU type and DRAM module

I/O effects:

2 x SATA3.0 (maximum transfer speed up to 6GB/s)
4 x USB3.0 ports
1 x RJ45 Network card interface
1 x VGA
1 x HDMI-Compatible
1 x DC

Audio:

Realtek Audio Transcoder
Realtek 5.1 Channel High Fidelity Audio
Audio output:Front Out/Front Speaker Out
Audio input: Microphone input

Ethernet: 1 x Realtek PCle 1000MB LAN

Expansion slot:

1 x M.2 NVME PCIe 3.0X4 (key M)2260/2280
1 x M.2 WIFI PCle

MOTHERBOARD DIAGRAM

1-1 B250M-I Motherboard Illustration

Rear I/O Panel

1-2 Overall Rear IO Panel Display

1-2 Overall Rear I/O Panel Display

1-3 LAN Port Status Table

1-4 Audio Port Configuration

Installation And Settings

NOTICE

please check the motherboard where all pins marked with number “1” or white bold line are position “1”

2-1 Clear CMOS Jumper CLR-CMOS

2-2 Expansion Ports

2-3 F_PANEL1 Boot Interface

In order to properly place the CPU in the motherboard, the surface of the LGA1151 CPU has two pairs of starting points and a golden triangle. Golden triangle indicates Pin1

2-4 CPU Installation

Remove the screw from the screw base
Remove the screw base
Tighten the screw base screwed into the length M.2 module to the M.2 interface distance hole
Insert your M.2 module into the M.2 interface at a 30 degree angle
Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base

2-5 M.2 Interface Installation

Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installation.
Align the memory module into the slot and press
Let the snaps on both ends of the slot automatically bounce

2-6 Memory Installation

2-7 SATA Interface

Drivers Installation

1. Drivers listing:

Drivers listing

2. Intel Chip Information Installation

Run“Control Panel – System – Hardware – Device Manager”
Click the right mouse button to change the driver’s hardware device and proceed with the installation below：
Option: Propertyl – Update driverl – Not connect to Internet –
Manually installation
Find the corresponding directory
Select “Next step”

3. Audio driver installation

Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for installation.

3.1 Audio driver installation (take HD Audio series for example)

Run “driver installer”: /B250M-lAudio/ALC662-32bit_Win7_Win8_Win81_Win10 R279/ALC662-64bit Win7 Win8 Win81 Win10 R279.exe
Click on “next”to continue,and then”finished”
The system will automatically restart itself to finish the installation

3.2 Uninstallation of audio driver(take HD Audio series for example)

Getting into Windows desktop, choose “setting”/ “control”, and then “add/remove programs”. Later, choose “Realtek High Definition Audio Driver” in the menu and click on “add/remove”so that the driver will be automatically removed.

4. Driver installation of external video card

Run “driver installer”, take Setup.exe,
Click on “next “yes”
-“next”
-“next” and”finished”h
The system will automatically search for devices to complete the installation

5. Driver installation of network

Run “driver installer”:B250M-| LAN/LAN/RTL810x 8111 win7/RTL810x 8111 win8/Win10_10028 07252018/setup.exe
click on “next”.
“installation”- “finished” and restart the computer, and restart the computer, The system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press “Delete/Del key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boot key is “F7”

Menu: please pay attention to every option in the settings menu. When there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.

1. Main Menu Function

Main
System Overview
Date/Time settings, HDD specs/Monitor type settings.
Advanced
Advanced Settings
BIOS special function settings, such as virus alert, booting disk priority etc.
Chipest
Advanced Chipest Settings
Boot
Boot Settings
Security
Security Settings
Save
Save Setting
Exit
Exit Options

Exit settings include loading of optimized defaults value/loading of fail-safe defaults / discarding changes/ exiting without saving.Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving.

B250M-I Back Page