Sensear PRGTAB01 Programming Tablet Instructions

Check List for Sensear Tablet
Turn off Headset

Power Tablet On:

• Connect the tablet to the headset and the app will auto launch
• Not required to be connected to Wi-Fi to program headsets
• If you get a pop-up message saying, “New update found. Proceed?” DO NOT click ok. This is a tablet update unrelated to the Sensear app and will give an error message.

Device:

• Firmware Types
  • Bootloader – Not applicable
  • Main Application – Shows current and past firmware versions
  • Audio Image – Contains all sounds played by the headset (tones, beeps, etc.)
  • Configuration Profile – Allows for selection of different headset profiles and headset operation
• Firmware Programming
  • Allows for upgrading the headset’s firmware (needs to be connected to Wi-Fi for firmware upgrades)
  • Red Indicates upgrade available, Green indicates the most recent firmware
  • Download the latest firmware to the tablet
  • Upload firmware from tablet to headset

Settings:

• Allows for customization of the headset

• SENS® Mode:

  • On at Start-Up
  • Enable
  • Disable
  • On During Transmit (TX) (hear SENS® audio when transmitting or in Bluetooth® mode)
  • Sidetone – Sets mic audio to be played in your ear during transmit

• Volume Limiter

  • Set to 82 dB(A) by default
  • Occupational Safety and Health Administration (OSHA) 85 dB(A) time-weighted over 8 hours
  • 90 dB(A) max

• Bluetooth®

  • Enable
  • Disable
  • Level Adjustment
  • RX-Cut or boost the headsets incoming receive audio level
  • TX-Cut or boost the headset outgoing transmit audio level

• Two-Way Radios

  • Level Adjustment
  • RX-Cut or boost the headsets incoming receive audio level
  • TX-Cut or boost the headset outgoing transmit audio level

• FM Radio

  • Enable/Disable
  • Allows the ability to listen to FR radio broadcasts – not compatible with Short-Range

• Short-Range

  • Enable/Disable
  • Channels/Frequency
  • Up to 8 preprogrammed channels available when enabled, configurable via set-up mode
  • Region
  • 1: Highest power
  • 2: Should generally be used in the EU region
  • 3: Should generally be used in the Americas (Note: Region 3 limits the highest frequency to 97.0MHz)
  • Transmit mode
  • Normal – Headset will transmit normally when the PTT button is pressed and stop transmitting when the PTT button is released
  • Latching Transmit – Headset will transmit when the PTT button is pressed and continue to transmit until the PTT button is pressed again
  • Transmit Only – Headset is constantly in transmit mode when powered on. It will not receive in this mode (designed for teacher mode).
  • VOX (Voice operated transmit)

• Allows for hands-free transmission via voice detect transmit function

• Trigger Level – Adjusts transmit detect sensitivity, Low (most sensitive), Medium, High

• Attack time – Set timing of transmitter on

• Release time – Set timing of transmitter off
  o Lockout – allows for locking certain features so they cannot accidentally be disabled

• Button Assignment

  • Applicable when PTT button SRCK6170 is used with SM1P smart muff headset with download
  • Applicable for use with smartPlug™ Full version in-ear headset

For more detailed information, please visit sensear.com/support/product- information for the Programming Tablet User Guide.

References

• Sensear - Industrial Communication Headsets

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>