HUANANZHI H310C-D3 Motherboard User Manual

HUANANZHI H310C-D3 Motherboard

Product Information

The H310C-D3 is a motherboard designed for computer assembly. It features the HC-D chipset, supports DDR4 RAM, and has various I/O ports including SATA, USB, PS/, RJ, DVI, HDMI, and VGA. It also has Realtek audio and LAN drivers, as well as PCIe and NVME slots for expansion. The motherboard comes with an I/O shield back plate, SATA data cable, user manual, and warranty card.

Product Usage Instructions

1. Ensure all parts are firmly connected before starting the computer to prevent failure of recognizing components.
2. Discharge your body static by touching other metal objects before taking the motherboard out of the box to prevent damage due to electrostatic discharge (ESD).
3. Switch off the power and pull the power cable from the socket prior to installation or disassembly.
4. If there is any damage to the packaging or lack of accessories, contact customer support as soon as possible.
5. Refer to the user manual for detailed instructions on installation and settings.
6. Install the necessary drivers for audio and LAN using the provided disk or download them from the manufacturer’s website.
7. Access the BIOS settings to configure system preferences such as boot order, security, and chipset settings.

Following these instructions will ensure the safe and successful usage of the H310C-D3 motherboard.

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow the steps below for a successful computer assembly.
• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
• In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of the box.
• Hold the border of the motherboard when taking it out. Do not touch the sensitive parts of the motherboard.
• Please put the motherboard in an anti-static container or on an anti-static pad if not needed.
• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
• Do not start the computer before installation is finished, otherwise, it might result in permanent damage to the computer parts or even injury to the user.
• If you need any assistance in the process of installation， please contact our after-sales customer service or reach us at.
• HUANANZHI official E-mail:business@huananzhi.com for professional technical support.
• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
• Keep the motherboard away from moisture.
• Keep the user manual for future reference.
• Before plugging in the power supply, please make sure the socket provides the corresponding voltage.
• In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything on the power cable.
• In the event of any of the following conditions, have the board checked by a service technician:
• Liquid penetrated into the computer.
• The motherboard is exposed to moisture.
• The motherboard does not work even if you follow the instructions in the user manual.
• Motherboard fell off to the ground and got damaged.
• Motherboard has clear signs of damage.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to the packaging or lack of accessories, contact us as soon as possible.

1. *HUANANZHI H310C-D3 motherboard
2. 1*SATA data cable
3. 1*1/O shield back plat
4. 1* User manual
5. 1* Warranty card

BRIEF INTRODUCTION

Features

• CPU: Intel ® LGA1151 13/15/17 6th 7th gth gth Generation Intel® Core ™M Intel ® LGA1151 8th Generation Intel ® Celeron ™ Intel® LGA1151 8th Generation Intel® Pentium ™M.
• RAM: 2* DIMM supports up to 16GB DDR3 1866/1600/1333MHZ Non-ECCmemory Two-Channel Memory Architecture Actual memory data rate depends on CPU type and DRAM module.
• 1/O effects: 3 x SATA3.0 (maximum transfer speed up to 6GB/S)
• 2 x USB3.0 interface
• 2× USB2.0 ports
• 1 x PS/2 Mouse and Keyboard port
• 1 x RJ45 Network card interfacet
• 1 x DVI 1 x HDMI-Compatible 1 x VGA
• Audio: Realtek Audio Transcoder Realtek 5.1 Channel High Fidelity Audio Audio output: Front Out/Front Speaker Out Audio input: Microphone input, Audio input.
• Ethernet: 1 x Realtek PCle Gigabit LAN Expansion slot: 1 × PCle 3.0 x16
• 1x PCle xl
• 1 x M.2 NVME PCle 2.0X4 (key M)2242/2260/2280
• 1 x M.2 NGFF SATA3.0 2212/2260/2280

Motherboard Diagram

Rear I/O Panel

Installation And Settings

NOTICE

please check the motherboard where all pins marked with the number“ 1” or a white bold line are position“ 1”

• In order to properly place the CPU in the motherboard, the surface of the LGA1151 CPU has two pairs of starting points and a golden triangle. The golden triangle indicates Pin1.

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installation.

2. Align the memory module into the slot and press.

3. Let the snaps on both ends of the slot automatically bounce.

4. M.2 NGFF available.

5. M.2 NVME available.

6. M.2 NVME/NGFF available.

7. Do not dial all the codes to the ON location, it will cause a short circuit.

Dial the code switch directions for use

1. Use a screwdriver to remove the bezel and screws on the main unit.
2. Need to pick up the card slot of the card slot when installing the graphics card.
3. Insert the graphics card into the card slot of the graphics card.
4. After the installation is in place, the chuck will automatically return to its position.
5. Secure the graphics card to the chassis with screws.
6. Install the power cord.

Graphics Card Installation

Drivers installation

Drivers listing

Intel Chip Information Installation

• Run“ Control Panel – System – Hardware – Device Manager”
• Click the right mouse button to change the driver’s hardware device and proceed with the installation below：
• Option: Property – Update driver – Not connected to the Internet –
• Manually installation
• Find the corresponding directory Select “Next step”

Audio driver installation

Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for installation.

Audio driver installation (take the HD Audio series for example)

• Run”driver installer”: / H310C-D3 SOUND CARD DRIVER/VISTA-WIN7-R267, take WDW-267 if OS is XP.
• Click on “next”to continue, and then”finished”.
• The system will automatically restart itself to finish the installation.

Uninstallation of audio driver(take HD Audio series for example)

Getting into the Windows desktop, choose “setting”/ “control”, and then “add/remove programs”. Later, choose “Realtek High Definition Audio Driver” in the menu and click on “add/remove”so that the driver will be automatically removed.

Driver installation of external video card

Run “driver installer”, take Setup.exe, and click on “next”- “yes” -“next” -“next” and”finished” The system will automatically search for devices to complete the installation.

Driver installation of network

Run “driver installer”: H310C-D3 LAN DRIVER/WIN7 XP click on “next”-“installation”-“finished” and restart the computer， the system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in the CMOS SRAM of the motherboard. When the computer is shut down, the motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press the “ Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. The motherboard warm boot key is the “ F11” Menu: please pay attention to every option in the settings menu. When there is a triangle- shaped symbol on the left side of the menu, it means that you choose this sub- menu, so a pop-up sub-menu will be available.

Main Menu Function

• Main
• System Overview
• Date/Time settings, HDD specs/Monitor type settings.
• Advanced
• Advanced Settings
• BIOS special function settings, such as virus alert, booting disk priority etc.
• Chipset
• Advanced Chipset Settings
• Boot
• Boot Settings
• Security
• Security Settings
• Save
• Save Setting
• Exit
• Exit Options
• Exit settings include a loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving. Exit settings include a loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving.

SZ HUANAN SANXIAN TECHNOLOGY CO., LTD. WWW.HUANANZHI.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>