UPRIGHT PURAWALL V4 Plug Diffuser Unit Instructions
- June 11, 2024
- Pura
Table of Contents
UPRIGHT PURAWALL V4 Plug Diffuser Unit Instructions
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electric products basic precautions should always be followed, including the following: Read all the instructions before using this product. To reduce the risk of injury, close supervision is necessary when a product is used near children. KEEP OUT OF REACH OF CHILDREN AND PETS. DO NOT put fingers, hands, metal or other strange objects in the product. No serviceable parts. DO NOT attempt to repair it. DO NOT refill fragrance bottle. If the diffuser unit blocks the “TEST” or “RESET” buttons of a GFCI receptacle, it is recommended that the unit be removed from the outlet monthly and the GFCI be tested before plugging the fragrance unit back into the outlet. Avoid hard knocks. If the diffuser unit fails or is damaged, remove from socket. This product is not a toy. Intended for adult use only. There are no user maintenance parts, do not open device.
CAUTION: CONTAINS FRAGRANCE OILS. IF SWALLOWED, DO NOT INDUCE VOMITING. Seek medical advice immediately or contact poison control. EYE & SKIN IRRITANT: Contact with liquid fragrance may cause eye or skin irritation. If contact occurs, rinse thoroughly with water for 15 minutes. If irritation persists, seek medical advice. CAUTION: RISK OF ELECTRICAL SHOCK AND FIRE HAZARD Use only in properly functioning 120 volt electrical outlet. DO NOT use extension cords. DO NOT plug anything above the diffuser. DO NOT disassemble the dispenser unit or modify the plug in any way. Use ONLY Pura scented oil refills. DO NOT cover or paint the unit. DO NOT place on or near polished, painted, plastic or wood surfaces. DO NOT use in confined spaces. DO NOT plug in sideways or upside down. Use with care around birds and other sensitive household pets. Use only as directed.
INSTALLATION INSTRUCTIONS:
Plug diffuser unit UPRIGHT with vial holes facing upwards (NOT sideways or
upside down) into properly functioning 120-volt wall outlet (NO extension
cords) in a well-ventilated area with 12-inch clearance above the unit and
nothing plugged above the diffuser. Rotate plug if necessary.
- Remove magnetic cover from diffuser unit.
- Allow diffuser unit to cool before replacing vials.
- Unscrew the cap on fragrance refill and set aside.
- Insert the vial completely into diffuser until you hear a click.
- Replace magnetic cover of diffuser unit.
- Discard empty refills.
USER MAINTENANCE:
Fragrance oils may collect on diffuser unit over time; to clean diffuser unit,
remove from electrical outlet and wipe with dry cloth. Replace fragrance
refill vial when empty. DO NOT immerse diffuser in water. DO NOT empty
fragrance oils in the drain. Wipe up any spills immediately.
MOVING AND STORAGE:
Remove diffuser with vial from outlet. Remove vial from diffuser and screw
caps onto fragrance bottles. Store vial upright with the diffuser in a dry
location. Placing the vial or the diffuser with the vial inserted on its side
or upside down will cause leakage. This appliance is not intended for use by
persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
The appliance is only to be used with the recommended vaporizing medium. The
use of other substances may give rise to a toxic or fire risk. capabilities,
or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play
with the appliance.
The appliance is only to be used with the recommended vaporizing medium. The
use of other substances may give rise to a toxic or fire risk.
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
Contains FCC ID: 2BA2Z-PURAWALLV4; Contains FCC ID: 2AC7Z-ESP32WROVERE Federal
Communication Commission Interference Statement: This equipment has been
tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter module must not be co-located or operating in conjunction with any other antenna or transmitter. This End equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and.
- This device must accept any interference, including interference that may cause Undesired operation of the device.
This equipment complies with FCC and IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.