FLEXIHIRE Stump Grinder Attachment Hire Instructions

: June 4, 2024
: FLEXIHIRE

Table of Contents

General Safety Instructions
General Engine Safety
Risk Assessment
Operating Safety Instructions
Digging Safety
Sign Off
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Safe Operating Procedure
PPE Required
Stump Grinder Attachment

FLEXIHIRE Stump Grinder Attachment Hire

General Safety Instructions

Complete pre-start checklist
Read Manufacturers Operation Manual (www.flexihire.com.au)
Report any faults or damage to Flexihire 1300FLEXIHIRE
Do not wear loose clothing or jewelry
Do not operate equipment near pedestrians or people
Do not operate without the appropriate PPE as detailed
Do not operate equipment under the influence of drugs or alcohol

General Engine Safety

Refueling – Do not smoke, or introduce an ignition source, always turn the engine off and allow the engine to cool first, relieve fuel pressure by loosening the cap slowly, and wipe clean any fuel spills prior to re-start, If fuel spilled on clothes change clothes, ensure cap is replaced & store fuel vessel away from the work area
Do not breathe fuel vapor & replace the cap securely after fuelling
Do not operate the engine without adequate ventilation
Beware of hot surfaces on engine & other parts

Risk Assessment

Assess the immediate work area for any hazards
Control or eliminate all the risks associated with the hazards
Hazards to check for that may require risk control-

❑Overhead power lines
❑Digging (underground services)
❑Steel Wire & Pipes
❑Traffic & moving machinery
❑Stored energy – air, hydraulic, electricity, pressure| ❑Loose rocks
❑Falling objects
❑High Voltage
❑Foreign objects
---|---

Operating Safety Instructions

Read and understand the SOP (Safe Operating Procedure) and Operation
Manual for the machine being used to run the stump grinder| When changing attachments always ensure that the locking pins are fully
engaged prior to operation
---|---
With the machine turned off, conduct a visual inspection on the stump grinder
head before each grind to ensure there are no cracks.| Perform a site walk around prior to operation looking for any foreign objects like metal, wire, rocks, bricks or other items other than the stump
Never allow children to operate machines or stand anywhere near the machine whilst in operation. Minimum 8m distance from the machine| Check there are no underground services like gas pipes, water, electricity
Plan work area prior to operation & ensure there is a minimum 8m exclusion
the zone where no person can enter| When operating keep the lift arms as low as possible. Do not travel or turn
with lift arms up.
Ensure the stump grinder attachment is secured adequately with the locking pins fully engaged| Turn on level ground. Go up and down slopes, not across them. Keep the
heavy end of the machine uphill.
Ensure the operator is wearing PPE including a face shield as objects can be
ejected at high velocity| Ensure all guards and covers are in place before use.
Ensure all machines controls and levers are in the NEUTRAL position before
starting the machine|

Digging Safety

Always contact local authorities prior to performing any digging to identify underground services

Sign Off

I/We, have been issued with and read through the Standard Operating Procedure – Stump Grinder Attachment
I/We also understand that it is essential, that before any works commence with the stump grinder attachment that:
- There is an exclusion zone of a minimum of 8m that no person can enter during the operation of the stump grinder; and
- An assessment of the ground for objects, such as metal wire and underground services like gas pipes and electricity should be conducted before operation; and
- The operator of the stump grinder is wearing all recommended PPE during operation.

Name __
Signature ____
Date _
Name __
Signature _
Date ___