SHARP EM-KS3CDE Electric Scooter User Guide

: June 11, 2024
: Sharp

Table of Contents

SHARP EM-KS3CDE Electric Scooter
Product Information: Electric Scooter
Product Usage Instructions: Quick Start Guide
Important safety instructions
What’s in the Box
Assembling the Handlebars
Unfolding and Folding the e-scooter
SHARP Life App
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SHARP EM-KS3CDE Electric Scooter

Product Information: Electric Scooter

The EM-KS3CDE and EM-KS4CDE are electric scooters that are designed for personal transportation. The scooters come with a rechargeable battery that powers the motor, allowing for easy and efficient travel. The scooters have a folding mechanism that makes them easy to store and transport, as well as a handlebar for steering and controlling the speed.

The product is available in multiple languages including EN, BG, BS, CS, DA, DE, EL, ES, ET, FI, FR, HE, HR, HU, IT, LT, LV, NL, NO, PL, PT, RO, SK, SL, SR, UA and SV. Please note that the product images in the manual are for illustration purposes only and the actual product may vary.

The product comes with important safety instructions that must be read and followed before operating the scooter. The battery and charger also have specific warnings that should be adhered to in order to ensure safe usage and disposal of the product.

Product Usage Instructions: Quick Start Guide

Assemble the handlebars by following the instructions provided in the manual.
Unfold the scooter by pressing down on the rear fender with one hand and using the other to lift up the Handlebar Stem so that it is straight. Make sure it is locked in place by using the Fold Lock Lever.
To fold the scooter for storage, lift up the Fold Lock Lever to release the Handlebar Stem. Push the Handlebar Stem down until it is touching the Rear Fender. Press down so that it connects with the hook in the Rear Fender.
For more detailed information on using your e-scooter, refer to the online manual by following the link provided in the manual or scanning the QR code.

It is important to follow the battery and charger warnings provided in the manual. If you need to remove the battery, unscrew the screws on the wooden deck and the metal plate, unplug the battery connector, and dispose of the battery according to local regulations.

If you need to dispose of the product, it should be done in an environmentally friendly manner and not with general household waste. For more information on disposal and conformity, please visit the links provided in the manual.

Trademark:
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,. Inc.

Use this Quick Guide to set up and start using your e-scooter. For more detailed information on your model of e-scooter, please refer to the on-line manual which can be found by following the link below or scanning the QR Code:
www.sharpconsumer.com/KS4CDE/#down

SHARP-EM-KS3CDE-Electric-Scooter-1

Important safety instructions

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

Please, read these safety instructions and respect the following warnings before the appliance is operated:

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
This symbol means that the product should be disposed of in an environmentally friendly manner and not with general household waste.
AC voltage
Class II equipment

In order to prevent fi re always keep candles and other open flames away from this product.

IMPORTANT: Read the following carefully and keep for future reference.

Sharp are not liable for Injury/death caused by miss-use
Sharp are not liable if the user does not follow the local laws and restrictions
The warranty does not cover damages caused by improper use of the device, especially in case use for non-domestic purposes and alterations and or adaptations necessary for countries or regions, for which it was not originally designed.
Always abide by local traffic rules and national laws and regulations while using your e-scooter.
Always adhere to the local speed limit. DO NOT exceed the speed limit for your e-scooter.
Always wear safety protection equipment when in use.
Always wear a safety helmet when riding your e-scooter.
Always ride with both hands holding the handles, never ride with one handed.
Do not ride in bad weather.
Stand on the deck of the e-scooter with both feet.
Do not use this e-scooter to perform stunts or dangerous maneuvers. This is scooter is designed for domestic use.
Do not carry people or items such as bags.
Ride slowly in crowded places.
Ensure that all screws and fasteners are tight and normal before use.
Make sure that the folding shaft enters the slot when unfolding the e- scooter.
Do not ride on uneven roads, water, oil or ice.
Do not weave through traffi c or make moves which are unpredictable to other people.
Do not ride the e-scooter if outside of the countries age limits.
Do not ride the e-scooter over the countries legal speed limit for e- scooters.
Do not use the e-scooter if it is damaged.
Do not use the e-scooter if the battery emits a peculiar smell and/or heats up.
Do not use the e-scooter if liquid leaks out of it, avoid contact and place out of the reach of children.
Before use, ensure that the e-scooter is not damaged. Do not ride if there is any damage.
Ensure that you read all of this User Manual before using the e-scooter.
Learn how to ride your e-scooter before using in a public space.
This scooter can be identified by the model and serial number located on the rating plate.
Propulsion is via an electric motor located in the driving wheel.
Only one person may ride on the e-scooter.
Do not modify this scooter in any way.
Do not use any parts or accessories unless recommended or approved by SHARP.
Ride the e-scooter on level surfaces. Do not exceed the specified incline.
Excessive use will reduce the lifetime of this e-scooter.
Caution, brakes and associated parts may become hot during use. Do not touch after use.

Battery and Charger Warnings

Do not power on the e-scooter while charging.
After the battery is fully charged, disconnect the charging cable.
The battery indicator in the display will show the battery lifetime.
If the battery charge indicator fl ashes on the display, stop riding and charge the battery.
Charge the battery after every use.
If the e-scooter is not used for a long time, charge it at least once a month. Note that if the battery is not charged for a long time, the battery will enter a self-protection state and will fail to charge. In this case, please contact your dealer.
When charging, plug the charger into the charging port before plugging to the wall socket.
While charging the indicator light of the charger is red; this means the charging is normal. When the indicator light turns green, charging is complete.
Only use the original charger to charge the battery.
The charger has an overcharge protection function, if the e-scooter is 100% fully charged, the charger will automatically stop charging.
Dispose of batteries and scooters in compliance with the applicable regulations in your country.

Batteries

Observe the correct polarity when inserting the batteries.
Do not expose batteries to high temperatures and do not place them in locations where the temperature might increase quickly, e.g. near fi re or in direct sunshine.
Do not expose batteries to excessive radiant heat, do not throw them into the fi re, do not disassemble them and do not try to recharge non-rechargeable batteries; they could leak or explode.
Disposal of a battery into fi re or mechanically crushing or cutting a battery can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
CAUTION: Risk of explosion or damage to equipment, if incorrect type batteries are used.
Never use different batteries together or mix new and old batteries together.
Do not use any batteries other than those specified.

Removal of Battery
EM-KS3

To remove the battery, peel up the rubber foot mat and remove the 6 screws on the wooden deck, then the 10 screws securing the metal plate. Now unplug the battery connector and remove. Ensure that the battery terminals are not shorted out. Dispose of the battery as required by your local regulations.

EM-KS4

To remove the battery, peel up the rubber foot mat and remove the 11 retaining screws from the metal plate, the plate can now be taken off to reveal the battery. Now unplug the battery connector and remove. Ensure that the battery terminals are not shorted out. Dispose of the battery as required by your local regulations.

Disposal of this equipment and batteries

Do not dispose of this product or its batteries as unsorted municipal waste. Return it to a designated collection point for the recycling of WEEE in accordance with local law. By doing so, you will help to conserve resources and protect the environment.
Most of the EU countries regulate the disposal of batteries by law. Recycling symbol appears on electrical equipment, packaging and batteries to remind users to dispose these items correctly. Users are requested to use existing return facilities for used equipment and batteries. Contact your retailer or local authorities for more information.

CE and UKCA statement:

Hereby, Sharp Consumer Electronics Poland sp. z o.o. declares that this e- scooter is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU, UK Radio Equipment Regulations 2017 and PN-EN 17128: 2021-03
These products have ABE certification.
The full text of the EU or UK declaration of conformity is available by following the link www.sharpconsumer.com and then entering the
“Documents of conformity” section at the bottom of the page.

www.sharpconsumer.com/contact/

www.sharpconsumer.com/support/

www.sharpconsumer.com/documents-of-conformity/

What’s in the Box

E-scooter
Warranty card
Quick Start Guide (this document)
1 × Allen key
4 × Handlebar screws
1 × Charger
1 × Power cord

Assembling the Handlebars

With reference to pictures 1 and 2 on page 1, assemble the handlebars with the supplied Allen key. This only has to be carried out when the product is un-boxed; the handlebars do not have to be removed after being attached.
Insert the handlebars into the handlebar stem as shown in the pictures. The handlebars have to be orientated as shown. While assembling the handlebars, be careful not to bend or break any parts.
Ensure that the screws are not overtightened and that the handlebars are secure and do not wobble after construction.
Ensure that the brake cable is not bent or damaged.

Unfolding and Folding the e-scooter

How to unfold?
Refer to the pictures 3 on page 1 unfold the e-scooter.
Press down on the rear fender with one hand and use the other to lift up the Handlebar Stem so that it is straight, refer to picture 3 step 3. When straight it will not move any further. Once locked, use the Fold Lock Lever to secure in place. This lever must be as close to the Handlebar Stem as possible when in the lock position. See picture 3 step 3 and 4.

How to fold?
Refer to the pictures 4 on page 1 fold the e-scooter for storage.
Lift up the Fold Lock Lever as shown in step 1 to release the Handlebar Stem. Push the Handlebar Stem down as shown in step 2 until it is touching the Rear Fender. No press down so that it connects with the hook in the Rear Fender as shown in step 3.
Note that on the EM-KS3 that the Fold Lock Catch is located on one side of the display and this results in the handlebar stem being slightly diagonal to the Foot Pad when correctly located.

Charging

Ensure that the battery FItted to your e-scooter is charged correctly by following the instructions as below:
- Plug the charger to the e-scooter charge port. Refer to picture page 1 for the location of the charging port on your e-scooter.
- Plug the charger to the mains wall socket.
When connected to the battery charger, the battery will start to charge and the charge indicator on the charger will turn red. After the charging is complete, the charge indicator will turn green; disconnect the battery charger when fully charged.

NOTES

If the scooter is not being used regularly, it is recommended to charge the battery every month.
Do not charge the battery outside.
Do not charge if the cable or scooter is wet.
Do not charge when the scooter is powered on.

USB Charging Socket

For your convenience a USB charging socket is located on the display module. To access the socket, pull the socket cover to one side.

SHARP Life App

Add the SHARP Life app to your mobile device to start enjoying the benefits of additional functionality. This includes:

Speed monitoring on your device.
Changing the speed/distance units between kilometers and miles.
Setting the maximum speed.
Lock the functions on your e-scooter.

Click on “Add Device”, when the e-scooter is turned on and the Bluetooth icon is flashing on the display.
Your device will scan automatically for your e-scooter. Make sure that the Bluetooth function is enabled on the e-scooter. Allow location services if requested.
Once the device is found, Bluetooth pairing is complete.

NOTE:
If you want to connect to the e-scooter with a new account, there are three ways: