Eventide P-N 141258 EQ65 Filter Set User Guide
- June 11, 2024
- Eventide
Table of Contents
Eventide P-N 141258 EQ65 Filter Set User Guide
Copyright 2023, Eventide Inc.
P/N: 141258, Rev 6
Eventide is a registered trademark of Eventide Inc.
AAX and Pro Tools are trademarks of Avid Technology. Names and logos are used
with permission.
Audio Units and macOS are trademarks of Apple, Inc.
VST is a trademark of Steinberg Media Technologies GmbH.
All other trademarks contained herein are the property of their respective
owners.
Eventide Inc.
One Alsan Way
Little Ferry, NJ 07643
201-641-1200
www.eventide.com
Welcome
About This Product
EQ65 is a two-band notch/band pass filter set based on the circuit model of the Urei 565 filter set. It allows you to adeptly de-emphasize or completely eliminate selected frequencies in an audio recording using its dual notch and band pass peak filters, which can be precisely configured using the fine tuning control. Designated frequencies may also be attenuated in gradations by using the notch filters in conjunction with the depth controls. Whatever your audio application may be, the EQ65 will provide you with flexible new options.
EQ65 Filter Set
Using the Eventide EQ65
The EQ65 is a valuable addition to the sound professional’s toolkit. This section lists only a few of its many uses. As you become more familiar with its design and capabilities, you’ll be sure to find numerous ways to utilize it that are not listed here.
Notching Narrow Band Coherent Noise
With its precision frequency selectivity and high Q, the EQ65’s notch filter is extremely effective at eliminating undesirable coherent signals such as hums and whistles. To do this, set the center frequency to the fundamental of the unwanted signal using the coarse and fine controls. Use the notch/peak shape selector to select the most effective notch shape. It is often helpful to select the peak mode to help zero in on the target frequency. You can audition the filter’s effect using the in/out switch. Signals with significant harmonic content can be attenuated by combining the pair of notch filters. Set one to the frequency of the fundamental and the other to the most prominent harmonic. If additional harmonics are present, you can gang additional instances of the EQ65 and tune the additional notch filters to the higher harmonics.
Eliminating Low or High Frequency Noise
The EQ65’s low pass and high pass filters have sharp roll-offs and extreme stop-band attenuation. This optimized design facilitates eliminating low- frequency rumble and highfrequency hiss.
Timbre Shaping
The EQ65 can be used to subtly shape the tonality of vocal or instrumental pitches with rich harmonic content by tuning the notch/peak filters to the fundamental or any combination of the harmonics. By adjusting the relative levels of the harmonics, a wide palette of tonality is possible. As described above, multiple instances of the EQ65 can be chained to handle any number of harmonics.
Simulations/Special Effects
The precise frequency control and flexibility of the EQ65 can be used to simulate distorted phone lines, cell phones, etc.
Preset Bar
Located at the top of the EQ65 Plug-In, the Preset Bar lets you load and save presets, along with several other features.
When EQ65 is installed, a library of settings is placed into the
In many DAWs there is an additional generic preset bar that saves DAW-specific presets to a separate location. We recommend saving your presets using the Eventide preset bar to ensure that your presets will be accessible from any DAW. You can also create sub-folders inside the preset folders, if you wish.
Conclusion
We hope you enjoy the EQ65 plug-in and put it to good use in all of your mixes. Please be sure to check out Eventide’s other native plug-in offerings for more unique and interesting effects.
For further questions or support, head over to the user forums.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>