YEELIGHT LED Sensor Drawer Light User Manual
- June 11, 2024
- Yeelight
Table of Contents
YEELIGHT LED Sensor Drawer Light User Manual
Product Description
Instructions
Short press the button to switch the mode to AUTO/ON/OFF
AUTO：The light automatically lights up when there is no obstacle within 4cm above the sensor, and automatically goes out when there is an obstacle (the blue indicator light lights up in AUTO mode, and it turns off automatically in 10 seconds);
ON : Constant light mode;
OFF : turn off；
Specifcations
- Model: YLCTD001
- Size ：682611mm
- Operating Temperature : -10° C to 25° C
- Operating Humidity : 0‒85% RH
- Color Temperature : 2700 K
- Rated Input ：5V 0.5A
- Rated Power ：0.15W
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person
- Class Ⅲ Luminaire
- If you find that the light is not on, please use the 5V adapter to charge the light
EU Declaration of Conformity
We QINGDAO YEELINK INFORMATION TECHNOLOGY CO.,
LTD., Hereby, declares that this equipment is in compliance with the
applicable Directives and European Norms, and amendments.
EU Declaration of Conformity
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more informationabout the location as well as terms and conditions of such collection points. EU Declaration of Conformity
Supplier’s Declaration of Conformity (SDoC) Equipment approved using SDoC is required to be tested, however, it is not necessary to use an FCC-recognized accredited testing laboratory. However, as minimum the testing laboratory used is required to maintain a record of the measurement facilities as specified in Section 2.948 and a record of the measurements made as specified in Section 2.938s well as terms and conditions of such collection points.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>