OLIGHT Otacle Pro Ti Utility Knife User Guide

OLIGHT Otacle Pro Ti Utility Knife

Product Information

The Oknife Otacle Pro Ti Paracord is a versatile folding knife that comes with a leather sheath. It features a 60mm blade made of SK2 steel and a handle made of TC4 titanium alloy. The knife also has a bottle opener, slide button, safety lock, pocket clip, slotted screwdriver/lanyard hole, and mini pry bar. The blade can be replaced easily by sliding it to the blade replacement position and following the instructions.

Specifications

• Handle Material: TC4 Titanium Alloy
• Blade Material: SK2 Steel
• Weight : 44g / 1.55oz
• Dimensions: 85 x 34.5 x 11.9mm/3.35 x 1.36 x 0.47in

Product Usage Instructions

Lock and Unlock of the Safety Lock

To lock the knife, push the safety lock button diagonally downward after the blade is fully retracted. To unlock the knife, push the safety lock button diagonally upward while in the lockout state.

Unlocking and Locking the Knife

To unlock the knife, unlock the safety lock and press and push the slide button forward to deploy the knife. To lock the knife, press the slide button and slide the knife back into the body to close it and engage the lock.

Blade Replacement

1. Slide the blade forward to its max blade sliding position.
2. Press the slide button once more and push it completely to the end of the slide channel.
3. Carefully pull the blade out and remove it.
4. Carefully insert the new blade (not included in the package).
5. Push the slide button and pull it back in the slide channel to complete the blade replacement.

Thank you for purchasing this Oknife product.
Please read this manual carefully before use and keep it for future reference!

IN THE BOX

PRODUCT OVERVIEW

SPECIFICATIONS

HOW TO USE

LOCK AND UNLOCK OF THE SAFETY LOCK

Lock: After the blade is fully retracted, push the safety lock button diagonally downward, the knife is completely locked.
Unlock: In the lockout state, push the safety lock button diagonally upward to unlock it.
UNLOCK THE KNIFE
Unlock the safety lock, press and push the slide button forward to deploy the knife.
LOCK THE KNIFE
Press the slide button and slide the knife back into the body to close the knife, then engage the lock.

CHANGE THE BLADE

1. Slide the blade forward to its max blade sliding position, press the slide button once more and push it completely to the end of the slide channel.

2. Carefully pull the blade out and remove it.
   

3. Carefully insert the new blade (not included in the package).

4. Push the slide button and pull it back in the slide channel to complete the blade replacement.

DANGER

• Keep out of reach of children. DO NOT let your children play with this knife to prevent injuries.
• This blade is very sharp. Improper use may cause injuries.

WARNING

• Make sure the blade is fully retracted and locked when storing or carrying the knife.
• DO NOT use the knife to cut hard objects such as metals and rocks, as this may cause the blade to chip or break.
  This knife is NOT intended to be used for food preparation.

NOTICE

• The knife blade may lose its sharpness over time. You can replace it with a new blade (not included) when necessary.
• Clean the knife and wipe it dry immediately after use. Apply oil to the blade to prevent rust if the knife is left unused for a long period of time. Store in a dry place.

WARRANTY

Your Oknife Utility knife Series products are guaranteed against defects in material and workmanship and have a limited lifetime warranty to the original purchaser of the products.

• Oknife Utility knife Series Team will not warranty products due to loss, damage caused by abuse, neglect, misuse, or accident.
• Repairs to your product performed by any source other than Oknife Utility knife Series Team unconditionally voids the knife’s warranty.
• Cost for postage is the responsibility of the customer.

USA Customer Support
cs@olightstore.com

Global Customer Support
contact@olightworld.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>