OLIGHT Obulb MC Multi-Color Night Bulb Light User Manual

OLIGHT Obulb MC Multi-Color Night Bulb Light

Product Information

The user manual provides safety warnings, exclusion clause, and contents in various languages such as English, Chinese, Finnish, Norwegian, Swedish, Nederlands, Polska, Deutsch, Russian, Romanesc, Ukrainian, Japanese, Korean, Thai, and Italiano. The product is manufactured by Dongguan Olight E-Commerce Technology Co., Ltd and made in China.

Product Usage Instructions

1. Please read the safety warnings carefully before using the product.
2. It is recommended to clean the product immediately after use.
3. The recommended number of devices connected at the same time is less than 5.
4. Use the product consistently with the recommended lockout mode to avoid damages or injuries.
5. For certain products, adjust the intensity of the flashlight to prevent overheating.
6. In some cases, charging may be disabled.
7. Remove water from the charging port by placing the product face down.
8. Remove any stickers or labels on the product immediately as it may cause dysfunctionality for certain products.
9. For certain products, if the distance is less than 1.2 meters or the internet speed is low, it is recommended to use the 2.4G network or set the WIFI network frequency to AUTO.
10. Follow the instructions and warnings in the manual to avoid damage, injuries, or malfunctioning of the product.
11. Contact Olight or the seller for any questions or concerns about product usage.

PLEASE READ THIS DOCUMENT CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE

WARNING

• Do not place the product near a fire or heat source, or throw the product into a fire.

CAUTION

• Do not look directly at the light source or shine the eyes, because it may cause temporary blindness or damage to the retina in severe cases.
• Do not charge the light with any other non-specified chargers.
• Do not store the product in a car or places where the temperature may exceed 60°C, because it may deform or damage the product.
• Please do not disassemble or modify the battery, or use the battery for other purposes.

NOTICE

• Non-pet toy.
• Do not disassemble the product.
• Do not immerse the product in seawater or other corrosive media as it will damage the product.
• When the product gets hot, please switch it to low brightness mode, or turn it off temporarily.
• Active thermal protection: The built-in sensor monitors the temperature in real-time. It prevents overheating by reducing the output.(Part of products)
• In an environment where the temperature is below 0°C, the product only works in low brightness.
• The battery has a high-temperature protection function. When working in a high-temperature environment (>40°C), it may fail to charge the product.
• Do not short-circuit the charging port with the metallic objects.
• Do not put it in the mouth or lick it, leakage of the charging port can cause discomfort.
• If water enters the charging port, it will cause charging failure. Please put it face down to dry it, or with a hot dryer.
• Keep the charging port clean and dry.
• The tail switch is magnetic, and the metal powder adsorbed on the surface will affect the function, please clean it immediately.
•  Do not place the light in a dusty environment, dust may enter the switch and cause it to malfunction. (Part of products)
• It is built-in with the lithium battery, please do not drop off it or hit it with heavy objects.
• Do not hit as a ball, because it may cause irreversible damage to the product.
• Not as a baby toy.
• Avoid contacting with sharp objects in case of scratches and damage to the product.
• Do not soak the product in water, because it may damage the product.(Part of products)
• Only two larger size Obulb could be charged on the Omino at a time. •The product can be charged with an MCC3 charging cable, but the charging indicator may not work properly if doing so.(Part of products)
• While the network data is shared among different phones, but there is only one device online in the mesh network, the device can only be controlled by the mobile phone firstly searching and adding it. If you want to control the device by another mobile phone, please disconnect it and use the other phone to search and add it.(Only Obulb Pro)
• While the network data is shared among different phones, the app will not synchronize the new data and preferences after sharing. If you want to synchronize the data, please reshare the data by a new QR code.(Only Obulb Pro)
• OTA upgrade is only available for Android phones.(Only Obulb Pro)
• When the APP imports network data from a QR code, the original data in the APP will be overwritten. (Only Obulb Pro)
• Frequent operation or multi-device control may lead to data congestion and cause the APP to response slowly or no response at all. Please try again or refresh the status.
• When the Bluetooth device uses functions such as cloud timing, delay, automatic scene setting, voice platform control or remote network control, it needs to cooperate with the gateway to work normally.
• When multiple devices are connected to the network simultaneously, they will complete connecting one by one. It will fail if a product hasn’t been connected within 3 minutes. It is recommended that the number of devices that are connected at the same time should be less than 5.
• The light adopts PWM regulation, please keep away from the radio in case of causing noise.
• In order to avoid interference with WIFI, it is recommended to keep the product more than 1 2 meters away from the WIFI transmitter; if the distance cannot be increased or the network becomes slow, it is recommended to set the WIFI to automatic frequency hopping mode or use the 2.4G frequency band.(Part of products)
• A USB adapter with 5W(5V1A) or above is recommended. Otherwise, the charging time will be longer.
• Before long term storage, please fully charge the battery.
• The product cannot access high brightness when the battery level is low.
• When the product is in a limited state (low battery or high temperature), if users change the brightness beyond the limit range with the APP, it is normal that the light flickers.
• It is normal that the light flickers when the battery is close to running out.

EXCLUSION CLAUSE

• Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.
Made in China
3.4000.0548

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>