OLIGHT i5T Cracked Brass Flashlight User Manual

OLIGHT i5T Cracked Brass Flashlight

Thank you for purchasing this Olight Product.
Please read this manual carefully before use and keep it for future reference!

When the light is first turned on, it will go to low as the default mode. Soft press without fully clicking for momenta,y on. Cycle through momenta,y low and high mode by quickly soft pressing, letting go, and soft pressing again. Deep press for constant on (you will hear a click).
Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels.
If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.

PACKAGE CONTENTS

SPECIFICATIONS

All above specifications are test results based on ANSI/NEMA FLl-2009 Standards.

TEAR HERE TO TAKE OUT THE PRODUCT AND DEOXIDIZER.

INSULATING FILM

Before first use, unscrew the tailcap and remove the insulating film.

BATTERY INSTALLATION

If the battery needs to be changed, make sure that the positive polarity side of the battery faces toward the direction of the flashlight head (the side of the LED).

AVAILABLE BATTERIES

• 1 x 1.5V AA alkaline batte,y (included)
• 1 x AA NiMH batte,y (compatible)

DANGER

• DO NOT throw the light directly into human eyes.
  This may cause temporal)’ blindness, or permanent damage to the eyes.

• DO NOT cover the light head when the flashlight is on, or place the flashlight head on the ground. The radiation energy of the flashlight may cause damage to the flashlight itself, or even result in burning to other materials.

• Please DO NOT use batteries other than the ones mentioned in the “available batteries”, especially rechargeable lithium batteries, otherwise it could lead to the damage of the flashlight, or unexpected danger.

WARNIN G

• Keep out of reach of children.
• If the light is about to be put aside for a long time or be transported, please unscrew the tailcap and remove the battery to cut off the circuit.
• DO NOT use rechargeable batteries with a nominal voltage higher than 3 6V This may cause damage to the product.
• DO NOT clean the lens with alcohol or any other chern1cals

NOTICE

• Ensure batte,y is inserted with the positive (+) end pointing to the head of the flashlight (LED side).
• When the flashlight is turned on, it will go to low as the default mode. Continue to click on and off within 2 seconds after it was turned off to shift between low and high brightness levels. If it is turned on over 2 seconds after it was switched off, it will go directly to low mode as default again.
• It is normal for the flashlight not being able to reach 300 lumens when the battery voltage is too low (under 1.2V).
• It is normal for the flashlight to blink when the battery is running out.

WARRANTY

Within 30 days of purchase: Return to the original seller for repair or replacement.
Within 5 years of purchase: Return to Olight for repair or replacement.
This warranty does not cover nonmal wear and tear,modifications, misuse, disintegrations, negligence,accidents, improper maintenance, or repair by anyone other than an Authorized retailer or Olighl itself.

USA Customer Support cs@olightstore.com
Global Customer Support contact@olightworld.com
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6
Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>