Jiangsu Saibo Yuhua Technology A13 1.09-Inch Full Touch Smartwatch User Guide
- June 5, 2024
- Jiangsu Saibo Yuhua Technology
Table of Contents
A13 1.09-Inch Full Touch Smartwatch
User Guide
Message push interface
Click the screen to view historical information, such as no history
information and the display is empty.
1.69-inch large screen, large font, more content display, easy to see.
Status interface
Switch to the interface to see the current number of steps, distances, and
calories. The distance and calories are calculated and displayed on the basis
of the current walking steps and the height and weight set by the APP
individual.
Heart rate test note:
- When the test, the icon will beat and the back heart rate of the hand ring LED lights will be lit;
- When testing, the sensor should stick to the skin to avoid the influence of external light on the accuracy of the test
Quick instructions for use
Part of the introduction
Charging method
For the first time, please take the wristband out and charge the equipment
with the corresponding charger. When charging. the wristband Vel opens
automatically. (charge mode as kilos: Joint the USB-during cable with Eland at
match point bask side and 1.188 port for charging. Charge voltage
5V.)
- To keep the test area dean, sweat m stains will rate the test results
Sports interface
Switch to the interface, dick the screen to enter Into the speedo sports iniltdo00, including rope skipping, swimming, king, pompano tennis, badminton such sot modes. slide the screen then enter the medic spats interface.
Heart rate Interlace
Switch to the heart rate interface, dick to amen to enter to heart rate
detection. After the test is completed, press the side button to exit the
heart rate detection. You can also connect to the mobile phone App, in the
heart rate interlace test atop. If the bracelet is not worn correctly or
tailed, the final failure Interface will be displayed. Under the heart rate
detection mods, the duration of the bracelet WI is reduced.
Temperature Interface
Switch to the temperature interface and click the screen to enter the
temperature detection. Mar the teal is completed, press the aide button to
exit the temperature detection. You Can also connect to the mobile phone App
in the temperature menu until the test mop. If the bracelet Is not worn
correctly or felled. the final failure Interface will be deployed.
wearing method
- Best near the wristband behind malleolus streets:
- Adjust we suitable for the two of wrists vs Adjustment Hole, fasten mist strap buttons;
Seiner mall is close to Pon avoiding moving.
Power on/off.
-
In the state of the wristband shutdown, Charging or long-press the rod Side button Ice 3 seconds the weld) wt power on. When the wristband’s in the OW Mete, Switch to the shutdown WertliCe
-
long-press the interface or press the red side button for 3 seconds, and the wristband vibrates and shuts down.
operation
When the device starts up, touch the screen or slide the interface to lighten the screen or switch over the display; -
The screen shall be screened off without operation for 5 seconds and users can connect the phone to App to modify the screen off time.
-
The wristband is default as open status for calling and message reminding, user can connect to App and change the open/off status.
-
Press the Return Button (which differs from the red button) at any time to return back to the main Interface.
Main interface setting
interface, If the watch is not worn correctly or failed, the final failure
interface will be displayed. Under the heart rate detection mode, the duration
of the watch will be reduced.
Blood pressure interface
Switch to the blood pressure interface, and click the screen to start testing
blood pressure. Once the blood pressure test is completed press the side
button to exit the blood pressure mode. If the test starts it will show the
results of the last test or “+” when the results are not measured; also you
can connect to the phone App, in the blood pressure interface once the test
stop, the test result is the same as above.
Information interface
In the message interface, click the main screen to view the message, and slide
the screen to turn over the pages. Press the side button to exit the
interface.
Settings interface
You can enter the sub menu by clicking on the related interface, and then
perform and operate more related functions.
enter the mobile phone APP to revise the off-screen time.
- The wristband factory defaults to open cans and ShIS reminders, Users can choose to open or close In the main interface of the APP.
Install the wristband APP
Scan the (cloning OR codes or enter Info various large application markets to download and irate. Giesynr
| 
---|---
http://a.app.qq.com/o/simple.jsp?pkgname=com.yc.gloryfit|
https://play.google.com/store/apps/details?id=com.yc.flagfit2
Device requirement i059.0 and above; AnOrckl 4.4 and above to support
Bluetooth 4.0.
EtrigMness adjustment: Click the main screen to adjust different
brightness. Mere is to 4 levels that you can click to choose any of then
Find the phone: In the connection state. click the screen to needed of
finding the motile phone, the phone wiring out to remind.
Version Infarrattraro Under the About interface, you can view the firmware
version:n number and Bluetooth address of the watch.
Restore selling : Long press on the testae interface. and eff the record
data will be erased. and the APP data will be cleared that day (the rest of
the historical data will remain).
Shutdown : The Interstate can be shut down after you dick the interface
menu and the wristband will vibrate.
Return: Press the Ede button of the breetslet to exit
Matters needing attention
- Please avoid Ewen Impact’s extreme beet and exposure to the wristband.
- Please do not disassemble, repel, or transacts., the device on its own.
Device attachment
When being used for the first time, It Is necessary to cconea APP for alignment After successful connection, the wristband will self-synchronize time, or otherwise, step calculation and sleep data won’t be accurate.
Open the mobile phone APP Click to set up icons
↓
Add device POSY Add device(Android)
↓
Click the upper right to find the icon
↓
Click device attachment
Bluetooth connection after successful matching. APP will automatically save the wristband duebocch address. When APP is opened or operated in the background, we automatically search and link with the vmstba^0 Deb Synclicalstis manually 0.41 down the synchronization data on the APP home ease; the bracelet a store off-line data for 7 days, the more data the longer the synchronaabon One is, and the longest time is about 2 minutes.
- The machine is charged with 5V 500MA. end it is strict& forbidden to use overvoltage load power.
- The use of the environment is 0 degrees -45 degrees, and it LS forbidden to throw it into the fire so as not to cause an explosion.
- Please wipe off the water with a soft door and then the wristband can be used for the charging operation, otherwise, It vnl cause corrosion of charging (*Mad point and charging incident may omit
- Do not touch chemical substances such as yawing. clean solvent. propane!, alcohol, or insect repellent
- Please do not use this product in high pressure and high magnetic environment. . If you have sensitive skin or tighten the wristband you may feel
- discomfortable.
- Please dry the sweat drips on the anal in time. The strap has long contact with soap, sweat Angles, or Mutton ingredients. which may cause akin allergy acting.
- If it Is often used, It Is recommended to dean the wristband every week. Wipe with the wet doll and remove oil or dust with mild soap. It is not appropriate to wear a hot bath with a wristband. After swimming, please wipe the valet and In time so as to keep dry.
Common problems
Why Is the first test of heart rate too long?
APP functions and setting
II Personal information and exercise goals After entering into APP, please
first set up personal information.
Me→Click avatar
- Head portrait gender, age, height, and weight can be set up and personal Information can enhance the accuracy of data.
- Customize personal everyday exercise goals. A reasonable exercise plan is helpful for promoting body quality.
Reminding function
For the reminding function, a reminding switch should be switched on in the
APP-end Setting Center, mobile phone, and wristband will be kept to be
connected successfully, and there will be vibrating reminders when there are
messages. To test your heart rate,
you need to take a long time signal to accurately calculate your heart rate.
What do Bluetooth connections do? (connection / reconnection failure or connection speed is slow)
Confirm whether your device system is Android 4.4 or Its nigher versions, and 10S9.0 It’s a higher version, and your device supports Bluetooth 4.0.
a. Because of the problem of signal interference In Bluetooth wireless connection, there may be no time to connect to each other. If the connection is not long enough, please ensure that the operation is carried out without a magnetic field or without multi Bluetooth device interference.
b. Turn off Bluetooth and open it.
c. Turn off the mobile phone background application or restart the mobile phone.
d. Mobile phones do not connect to other Bluetooth devices or functions at the same time.
e. APP is running normally in the background and may not be connected if it is not in the background.
Can’t search the wristband?
Since the wristband is not searched by phone in Bluetooth broadcast, make sure the wristband is in power and activated and is not connected to any
call reminding: when the caller calls, the ring will shake and the name or number of the caller is displayed. (if the caller’s name has been saved in the phone address book, the name is displayed, otherwise the display number)
Message reminding: when a text message arrives, the wristband will vibrate and display the SMS icon reminder, the address message of the address book contact person displays the name, and the short message number of the stranger.
QQ reminding: when the QQ Information arrives, the ring will vibrate and display the Q0 icon.
WeChat reminding: when the WeChat Information is received, the hand ring will shake and the WeChat icon reminds
Alarm clock reminding: it can set up three-alarm docks, and it synchronizes to the bracelet after setting up. The intelligent alarm clock is a silent alarm dock. When the alarm Is on, the bracelet will cause moderate vibration, and support the offline alarm clock reminder.
Another reminder: when receiving email or other Information, the wristband vibrates and displays other reminder icons. Cia to see the content.
Charging: When the wristband is connected to the power supply or charged by the charging damp, the motor vibrates, and the wristband does not vibrate.
other phones. Then, put the wristband close to the phone, if it is still turned off the phone, and after about 20 seconds, restart the phone Bluetooth.
Why the wristband should be worn more tightly when measuring heart rate?
The wristband uses the light reflection principle, penetrates the skin through the light or source, and collects the signal reflected to the sensor, to calculate your heart rate. If you don’t wear it tightly, there will be ambient light reaching Into the sensor, which will affect measurement accuracy.
Why not remind when opening the reminder function?
Android phone: confirm that the phone and the wristband are connected, and open the corresponding permissions in the phone settings, allowing the GbyFit APP to access calls, messages, and address book, and keeping bryFir running in the background; if the phone is installed with security software, add GloryFir to ‘trust. !phone: If there is no reminder after the connection, it is recommended to restart the phone to reconnect, when reconnecting the wristband again, there wiN be a reminder after popping up the ‘Bluetooth pairing request” and diddng ‘Pairing’.
Is the wristband waterproof?
It supports IP68 waterproof and dust-proof levels (IP68 standard is 35 degrees below water, 1 meter below 30 minutes). Usually, wash hands, rain, cold water shower, wash car can be worn with heart.
vibrate and display other reminder icons, Click the viewable content.
WeChat reminding: When the steps reach the target set on the APP, the wristband will vibrate and display the target reaching icon
Sleep detection function
When you fall asleep, the wristband will automatically determine the sleep monitoring mode, automatically detect your deep sleep / shallow sleep/wakefulness time, calculate your sleep quality, and sleep data temporarily support APP only.
Note: you can get sleep data when you go to sleep with a hand ring.
Main functional interface
Main interface
The wristband has multiple main interfaces, and the interface can be switched
after clicking on the main interface. After the first pairing of the APP, the
wristband will synchronize the time, date, and week of the cell
phone.
Does the Bluetooth connection need to be open all the time? Is there any
data after disconnection?
Before the data is synchronized, the data is kept on the wristband host
(seven days of data can be retained). When the Bluetooth connection of the
wristband and the wristband is successful, the wristband data will be
automatically uploaded to the mobile terminal. Please synchronize the data to
the mobile terminal in time.
Note: if the calor and SMS alerts are opened. you must keep the Bluetooth
connection, and the alarm Is offline.
Basic parameter
| Type | 1.09 Iros WI feud, Erart Wactt | Ba ery Type | LI-Polymer |
|---|---|---|---|
| Display Size | 1.09Inch | Ba ery Model | 451725 |
| Weight | 54.5g | Ba ery Capacity | 180mAh |
| Length | 25.5cm | Ba ery Voltage | DC 5.0V |
| Waterproof Level | 10M | Ba my Power | 0.74Wh |
| Material | silica gel modification | Package | Device manual Ovnim Dock |
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference In a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.