Kruger Matz KM0904 Power Bank Owner’s Manual

June 11, 2024
Kruger Matz

Kruger-LOGO

Kruger Matz KM0904 Power Bank

Kruger-Matz-KM0904-Power-Bank-PRODCUT

Product Information

The KM0904 is a power bank manufactured by Lechpol Electronics Leszek Sp.k. It has a battery capacity of 10,000 mAh and is equipped with USB Type-C, micro USB, and USB interfaces. The power bank is also equipped with LED indicators that show the battery level, automatic detection of mobile devices, and short- circuit, overcurrent, overcharge, and deep discharge protection. The power bank is made of ABS material and comes in black color. It measures 135 x 68 x 15 mm and weighs 224 g.

Product Usage Instructions

Charging the Power Bank

To charge the power bank, follow these steps:

  1. Connect the micro USB plug of the included USB cable to the corresponding inputs of the power bank.
  2. Connect the USB plug to the AC adapter and then to the power supply socket. LEDs flash during charging. When the battery is fully charged, the LEDs stop flashing.
  3. Alternatively, connect the micro USB plug of the included USB cable to the corresponding inputs of the power bank and connect the USB plug to the compatible PC USB port. LEDs flash during charging. When the battery is fully charged, the LEDs stop flashing.

Charging External Devices

To charge external devices using the power bank, follow these steps:

  1. Connect the USB plug to one of the USB outputs of the power bank.
  2. Connect the other plug to the USB input of your external device. The LED indicator will turn on. It turns off after a few seconds from disconnecting the external device.

SAFETY INFORMATION

Before use, read this manual carefully and follow its instructions. Producer does not claim responsibility for any damages caused by inappropriate use and handling.

  1. Protect this product from moisture, humidity, water and any other liquid. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
  2. Do not place heavy objects on the device.
  3. Use only authorized accessories.
  4. Do not use this device if it has been damaged or its operation is abnormal.
  5. Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for check-up/repair.
  6. Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

PRODUCT DESCRIPTION

  1. Power button (press to see the power bank battery level)
  2. LED indicator
  3. micro USB input
  4. USB Type-C input
  5. USB output

CHARGING POWER BANK

  1. Connect micro USB plug of the included USB cable to the corresponding inputs of the power bank. Connect the USB plug to the AC adapter and then to the power supply socket. LEDs flash during charging. When the battery is fully charged, the LEDs stop flashing.

  2. Connect micro USB plug of the included USB cable to the corresponding inputs of the power bank. Connect the USB plug to the compatible PC USB port. LEDs flash during charging. When the battery is fully charged, the LEDs stop flashing.

Kruger-Matz-KM0904-Power-Bank-FIG-3

CHARGING EXTERNAL DEVICES

  1. Connect the USB plug to one of the USB outputs of the power bank. Connect the other plug to the USB input of your external device. The LED indicator will turn on. It turns off after a few seconds from disconnecting the external device.Kruger-Matz-KM0904-Power-Bank-FIG-4

SPECIFICATION

  • Interface: USB Type-C, micro USB, USB Battery type: Li-Poly
  • Battery capacity: 10 000 mAh
  • Input voltage (microUSB): 5 V / 9 V
  • Input current (microUSB): 2000 mA
  • Output voltage (USB-C): 5 V / 9 V
  • Output current (USB-C): 2000 mA
  • Input voltage QC (USB): 5 V / 9 V / 12 V (max 18 W)
  • Output current QC (USB): 3000 mA / 2000 mA / 1500 mA
  • Input voltage QC (USB typu C): 5 V / 9 V / 12 V (max 20 W)
  • Output current QC (USB typu C): 3000 mA / 2220 mA / 1670 mA

Additional information:

  • LED indicator: Automatic detection of mobile devices Short-circuit, overcurrent, overcharge and deep discharge protection
  • Material: ABS
  • Color: Black
  • Dimensions: 135 x 68 x 15 mm
  • Weight: 224 g

LEARN MORE

  • For more information on this product, go to www.krugermatz.com.
  • Visit www.krugermatz.com website for more products and accessories.
  • In case of any doubts or questions reach out to our Frequently Asked Questions section.

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

QR SCAN

www.krugermatz.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals