Scene CJ-IB10-EX Bluetooth Beacon Instruction Manual

Scene CJ-IB10-EX Bluetooth Beacon

Overview

The CJ-IB10-EX is a Bluetooth beacon that sends its own information to the work card, including the MAC address and battery quantity of electricity, for marking the position of geographical. Its message will be collected by the work card and uploaded to the base station by the network.

Technical Data

The CJ-IB10-EX uses advanced Bluetooth localization (ranging) technology and the chip is from Nordic company nRF52810AA. The development platform uses V15.3, and the protocol stack file is s1 12_nrf52_6.1.1_softdevice. The SDK supports Bluetooth V4.1 to 5.0.

• Bluetooth technology characteristics: Old version UUID 0xB5,0xB1,0x82,0xC7,0xEA,0xB1,0x49,0x88,0xAA,0x99,0xB5,0xC1,0x51,0x70,0x08,0xD9voltage free data New version UUID 0xB5,0xB1,0x82,0xC7,0xEA,0xB1,0x49,0x88,0xAA,0x99,0xB5,0xC1,0x51,0x70,0x08,0xDA (Voltage data).
• Legal: Bluetooth works in the 2.4GHz ISM band, which does not require a license from the IEEE 802.15.4 standard.
• Transmission mode: Asynchronous connection-less (ACL) advertising and synchronous connection-oriented (SOC) link.
• Transmit data: The status of the main device of the product. The cycle (default: 200ms) transmits broadcast data at the rate of 1MHz bps.
• Anti-interference: The network segment has 79 frequency points, spaced 1MHz, using frequency modulation technology, can change the frequency 1600 times per second, each time lasting 625uS.
• Ultra-low power consumption: current below 6uA (3.6V 0dBm) while in sleep mode, sending current about 4.6mA, continuous 0.24ms.
• Comprehensive average current: 12uA (including 4uA sampling circuit).
• Battery life: More than 10 years in theory, estimated battery life is about 8 years due to battery loss.
• Data security: Use Nordic Bluetooth protocol stack, and AES HW encryption.
• Communication distance: 0-30 meters.
• Bluetooth chip: nRF52810-AA.

Physical Design
The CJ-IB10-EX is strong and can withstand all kinds of harsh/dangerous environments, making it suitable for chemical, mining, medical, and other industries. It is easy to install with a reliable structure design and can be installed on the wall/road/ceiling, etc.

Function Description

The CJ-IB10-EX is used to achieve the overall design goal system of personnel positioning. The system will use some beacons to be fixed where the human will pass, its own unique MAC address or Device EUI (each MAC/EUI address corresponds to a certain point in the map location), and battery voltage information. In addition to the MAC/EUI address and battery capacity, UUID, major, and minor information are also sent for flexible configuration and sorting of the cloud computer. Beacons themselves are major and minor(unique), which can be written at production time (Jlink command) and stored permanently. The product has an active detection of beacon voltage, and the battery shall be replaced if the battery’s power energy is less. The uploaded data can be encrypted using the DES encryption standard and cannot be identified by other systems. The CJ-IB10-EX also has an extensible RFID function for clocking/identification.

Usage Instructions

To use the CJ-IB10-EX Bluetooth beacon, follow these instructions:

1. Install the CJ-IB10-EX on a wall, road, ceiling, or other surface.
2. The beacon will send its own information to a work card, including the MAC address and battery quantity of electricity, for marking the position of geographical.
3. The work card will collect the message and upload it to the base station via the network.
4. The battery shall be replaced if the battery’s power energy is less.
5. The uploaded data can be encrypted using the DES encryption standard and cannot be identified by other systems.

Product Overview

The Bluetooth beacon sends its own information to the work card, including MAC address and battery quantity of electricity etc., for marking the position of geographical, its message will be collected by work card and uploaded to base station by the network.

Product technical data

Technology background：
Advanced Bluetooth localization (ranging) technology is adopted. The chip is Nordic company nRF52810AA, and the development platform use V15.3. The protocol stack file is s1 12_nrf52_6.1.1_softdevice and the SDK supports Bluetooth V4.1 to 5.0

Bluetooth technology characteristics：
Old version UUID：
0xB5,0xB1,0x82,0xC7,0xEA,0xB1,0x49,0x88,0xAA,0x99,0xB5,0xC1,0x51,0x70,0x08,0xD9（voltage free data）

New version UUID：
0xB5,0xB1,0x82,0xC7,0xEA,0xB1,0x49,0x88,0xAA,0x99,0xB5,0xC1,0x51,0x70,0x08,0xDA(Voltage data）Legal: Bluetooth works in the 2.4GHz ISM band, which does not require a license from the IEEE 802.15.4 standard

• Transmission mode: Asynchronous connection-less (ACL) adverting, synchronous connection-oriented (SOC) link
• Transmit data: The status of the main device of the product. The cycle (default: 200ms) transmits broadcast data at the rate of 1MHz bps
• Anti-interference: The network segment has 79 frequency points, spaced 1MHz, using free quency modulation technology, can change the frequency 1600 times per second, each time lasting 625uS
• Ultra-low power consumption: current below 6uA (3.6V 0dBm) while in sleep mode, sendi ng current about 4.6mA, continuous 0.24ms
• Comprehensive average current: 12uA (including 4uA sampling circuit)
• Battery life: More than 10 years in theory, estimated battery life is about 8 years due to battery loss
• Data security: Use Nordic Bluetooth protocol stack, AES HW encryption
• Communication distance: 0-30 meters
• Bluetooth chip: nRF52810-AA

Physical design：
This product is suitable for dangerous/pollution/damp/strong interference and another harsh environment.

• Waterproof design: up to IP68 or above
• Safety level: Primary safety level
• Load-bearing grade: refer to manhole cover GB/T23858-2009, choose E600 type

The direction of technology：

Positional accuracy: The hardware is compatible with Bluetooth version 5.1, intends to adopt direction-finding technology, thus the beacon can use AoD (emission Angle) to transmit multi-antenna array data; The work card is received by AoA and contains multiple antenna array data, it’s positioning angles and distances through different arrival times. In theory, the accuracy can reach the centimeter level, which makes preparation for the study of the AoD & AoA algorithm.

Product function description

The main components description as above and the specific software design and functional requirements as follows: In order to achieve the overall design goal system of personnel positioning, the system will use some beacon to be fixed where the human will pass, it own unique MAC address or Device EUI (each MAC/ EUI address corresponds to a certain point in the map location) and battery voltage information. In addition to the MAC/EUI address and battery capacity, UUID, major, and minor information are also sent for flexible configuration and sorting of the cloud computing. Beacons themselves are major and minor (unique), which can be written at production time (Jlink command) and stored permanently Active detection of beacon voltage (see “CJ-LB10G positioning card data manual V3.2 “), battery shall be replaced if the battery’s power energy is less. It’s strong and can withstand all kinds of harsh/dangerous environments, suitable for chemical, mining, medical and other industries. Easy to install, reliable structure design, can be installed on the wall/road/ceiling, etc. The uploaded data can be encrypted using the DES encryption standard and cannot be identified by other systems. Extensible RFID function for clocking/identification.

Specific implementation methods and attached drawings

The product structure is compact, its appearance meets user needs, and beacon construction is light, easy to install, and maintenance-free; There are 2 mounting holes, use threaded screws, and fixed to the ground/wall or ceiling, with strong load-bearing/compressive capacity. Such as the picture below :

1. The circle in the figure is the installation hole;
2. The sides are trapezoid, which can withstand the rolling of large trucks.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>