AMAX LED-RSM7DL/WT LED Radar Sensor Disc Light Instructions
- June 8, 2024
- AMAX
Table of Contents
AMAX LED-RSM7DL/WT LED Radar Sensor Disc Light
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY
INSTRUCTIONS SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS
- TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A CERTIFIED ELECTRICIAN FAMILIAR WITH LOCAL MUNICIPAL CODES AND REQUIREMENTS.
- CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.
| PART | DESCRIPTION | QTY |
|---|---|---|
| A | LED disc light | 1 |
| B | Mounting screws | 2 |
| C | Wire nut | 3 |
| D | Mounting plate | 1 |
FLUSH MOUNT
Radar sensor turns off the light after 17 seconds of no detection and back on as the user re-enters the workplace from 4.5-5.5 yards away. Back Convex Dimension: 2 1/8″x5/8″
WARNING: Wet-rated lighting fixtures are used in places with direct exposure to water. These locations include almost all outdoor lights, including landscape lighting such as path lights and ground wells. Fixtures rated for wet locations use waterproof seals to protect their internal components from moisture. This does not cover the section where the light is mounted to the junction box. If water is entering through the juncton box, it will enter the light fixture, and that is classified as an electrical hazzard by most municipal and fire departments.
Customer service: 888-945-5221
- Do not return to the store.
INSTALLATION INSTRUCTION
- Prior to installation, install mounting plate into the electrical junction box with mounting screws. Drive screws completely to the end of the junction box.
- Connect supply wires to wires on fixture with wire nuts. Connect white to white, black to black, and ground wire to ground wire as grounding connection.
- Complete the installation by pushing the fixture spring clips towards the opening in the mounting plate installed on the junction box.
TOOLS AND MATERIALS REQUIRED
- Wiring supplies as required by your local Provincial or State Electrical Code
Made in China