Vanbus B0C6F9T2NJ Cup Washer for Sink User Manual

June 17, 2024
Vanbus

Vanbus B0C6F9T2NJ Cup Washer for Sink

Vanbus B0C6F9T2NJ Cup Washer for Sink 

OTHER MODEL

Other Model
Other Model

INSTALLATION STEPS

This product has been inspected and debugged by the factory to the best condition. Please do not disassemble and assemble it yourself.
Installation Steps

Before installing the faucet, please he sure  to remove sundries and sludge from the water pipe to prevent sundries from blocking the faucet.
Installation Steps

Helpful Information Tools

Gather the necessary tools as shown below to complete the installation of this Glass rinse.

  • Adjustable Wrench
    Helpful Information Tools

  • Flash Light
    Helpful Information Tools

  • Basin Wrench
    Helpful Information Tools

  • Safety Glasses
    Helpful Information Tools

  • Thread Sealant

Read all instructions before installation

Tum off hot and cold water supplies at angle stops before installing glass rinse.

  1. Put the base on the sink hole.
    Installation Steps

  2. Put the gasket and Stainless steel gasket and nut onto the shank .
    Installation Steps

  3. Screw the round nut onto the shank, and tighten.
    Installation Steps

  4. Screw the 1/2” end of provided supply pipe to mounting shank with wrench.
    Installation Steps

  5. Untie the existing cold water faucet supply pipe form angle stop. Screw provided tee onto angle stop with wrench.
    Installation Steps

  6. Screw both the faucet supply pipe and the 3/8” end of provided supply line to tee When pipes are installed, check alignment retighten mounting nut.

Installation Steps

INSTALLATION DIMENSION

Installation Steps

| |
---|---|---

CLEANING CARE

In order to keep the appearance of faucet clean, bright and good

performance, please take care of the faucet as follows;
Symbols

  1. Rinse with water only and dry with scoff cotton cloth;
  2. Use mild liquid and colorless glass cleaner to remove surface dirt and scale film, or use polish without abrasive effect;
  3. Do not use abrasive detergent, polish, emery cloth, paper towel or scraper, etc.;
  4. Do not use acid cleaner, or cleaner and soap with insoluble gran etc.;
  5. ln the process of use, mud my accumulate in the bubbler and make the water flow show, The bubbler can be unscrewed, rinsed with water, and then installed back in place.

Customer Support

Pls feel free to contact us if you have any questions. We will solve this in time with this email of vanbus@l63.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals