VIKING Arm Precision Clamping Tool User Manual

VIKING Arm Precision Clamping Tool

Product Information

The product is a clamping tool with a Lock & Release mechanism, lever, mounting holes, base plate, and bars. It also has a shaft that can be inserted from both sides and a Lock Screw to secure the shaft in place. The product can be used for controlled lowering or as a clamping tool.

The product has a maximum torque of 6 Nm / 4.4 ft lb and can support weights up to 150 kg / 330 lb.

Product Usage Instructions

Controlled Lowering

1. Pump the left trigger for controlled lowering
2. To quickly release, press down and hold the right Full Release
   trigger

Using as a Clamping Tool:

1. Remove the Lock Screw
2. Press and hold the right trigger, then pull out the shaft
3. Fully insert the shaft from the other side while holding down the right trigger
4. Release the trigger and attach the Lock Screw

Note: Always ensure that the Lock Screw is securely fastened before using the product.

OVERVIEW

1. A. Lock Screw
2. B. Shaft
3. C. Lock & Release Mechanism
4. D. Lever
5. E. Mounting Holes
6. F. Base Plate
7. G. Bars

Mounting

Lift Mode

Controlled lowering

Full Release

1. Press down and hold right‘Full release trigger

Use as a clamping tool

1. Remove Lock Screw
2. Press and hold the right trigger. Pull out the shaft

1. Fully insert the shaft from the other side while holding down the right trigger
2. Release the trigger and attach the Lock Screw

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>