Guangdong Xizhongxi S8 Plus Power Bank with Earbuds User Manual

Guangdong Xizhongxi S8 Plus Power Bank with Earbuds

Product Overview

The S8 Plus is a wireless electronic product that comes with a charging case. It features a digital display, haptic button, indicator light, ear cap, charging contact pin, MIC, USB-A output, and Type-C output/input.

Product Usage Instructions

For a good user experience, please read the manual carefully before using the products. Here are some instructions to help you use the S8 Plus:

Siri and other Voice Assistant
iOS and part of the Android users can triple click the left or right power switch to turn on the voice assistant. The voice assistant will be automatically activated depending on the different OS in the mobile system. The voice assistant will be automatically activated depends in different OS in mobile system

Restore Factory Setting
To restore factory settings, please turn off the Bluetooth of the mobile phone and the earbud light will flash red/blue. Quickly press the power button of both earbuds four times.

1. Please turn off the Bluetooth of the mobile phone and the earbud light will flash red / blue. Quickly press the power button of both earbud four times
2. Please delete all paired records on the phone and re-search 【S8 Plus】after clearing the pairing and then reconnect

Settings

To pair the S8 Plus with your iPhone or Apple Watch, go to the Bluetooth settings and search for “S8 Plus”. If you encounter pairing issues, please delete all paired records on the phone and re-search for “S8 Plus” after clearing the pairing and then reconnect.

1. Choose the ear cap that suits you
2. Make sure that the ear caps face down and put the earbuds into the ear in the angle shown as the picture on the right.
3. After putting on the earbuds, gently rotating the earbuds to a comfortable and secure position shown as picture 3 on the right.Now the earbuds are put on correctly!
4. Do not wear the earbuds like the way shown as the picture on the right.

Earbuds Indicator Light

• Turn on: The blue light flashes for 1 second.
• Turn off: The red light flashes for 1 second.
• Search earbuds: Red and blue light flash alternately.
• Music play: No light.
• Low battery: Red light flashes once every 6 seconds.
• Charging: Red light on. Red light off when fully charged.
• Status Light
• Turn on The blue light flashes for 1 second
• Turn off The red light flashes for 1 second
• Search earbuds Red and blue light flash alternately
• Music play No light
• Low battery Red light flashes once every 6s
• Charging Red light on
• Full battery Red light off

Charging Case Indicator Light

• Status White light
• Left earbud in charging state: L light on the charging case on.
• Left earbud in full battery state: L light on the charging case off.
• Right earbud in charging state: R light on the charging case on.
• Right earbud in full battery state: R light on the charging case off.
• Charging case in full battery state: Displays 100%.
• Charging for earbuds: Displays remaining power of charging case.
• Charging case in low battery state: Displays 5%.

Choose the Ear Cap

Choose the ear cap that suits you best. Make sure that the ear caps face down and put the earbuds into the ear at the angle shown in the picture on the right. After putting on the earbuds, gently rotate them to a comfortable and secure position as shown in picture 3 on the right. Do not wear the earbuds like the way shown in the error demonstration picture.

First Time Using

1. Tear off the insulating film.
2. Put the earbuds into the charging case to charge.
3. Take out from case, the indicator will turn to Red and Blue alternately. If the earbuds are not turned on or there is no sound coming out, please put them back in the charging case again to make sure that they are in the charging state before taking them out for use (red/blue light flash alternately).
4. The indicator of one earbud will go off and another will flash red and blue light alternately.(In pairing mode)
5. Turn on the Bluetooth function on your phone and search for 【S8 Plus】and connect it.

Notice: To avoid unnecessary troubles, please do not disassemble these products by yourself and please use the standard charger to charge.

Warm notice

• If indicators of both earbuds keep flashing red and blue, click either earbud’s power switch twice. Then the indicator of one earbud will flash red and blue alternately, another will go off. (in pairing mode）
• If you want to switch the Bluetooth connection to another device, please disable the Bluetooth function in the previously connected device OR delete the pairing name of “S8 Plus” from the original device. Then the pairing name of “S8 Plus”can be searched in new device and connected successfully.

Thanks for using our wireless electronic products. For a good user experience, please read the manual carefully before using the products. Notice: To avoid unnecessary troubles, please do not disassemble these products by yourself and please use the standard charger to charge.

Button control

Warm notice
For any single earbud, when it is in standalone mode, you can’t use it to play the previous song or decrease the volume.

Parameter specification

• Version V5.3+EDR
• Support A2DP,AVRCP,HFP,HSP
• Transmission distance 10m
• Frequency range 2.402GHz~2.480GHz
• Hi-fi equipment Φ8.2mm*2
• Impedance 16Ω
• Standby time 70 hours
• Talk time 5 hours
• Listening time 6 hours
• Earbud battery capacity 50 mAh
• Charging time 1.5 hours
• Charging case battery capacity 5000mAh
• Charging case charging time About 2.5 hours
• Weight(single earbud) 4.5 g

Notice:
If the charging case is out of power, it may cause the earbuds to fail to shut down and remain connected to the phone even when they are placed in the charging case. So please remerber to charge the charging case in time.

Charging case
Please use a charger with a maximum output voltage of DC5V/3A to charge the Charging case. (Must choose a charger certified by a regular manufacturer).

Attentions

If moisture remains at the audio output hole, the sound may become fuzzy or completely inaudible. This is completely normal. In this case, please remove the earbuds and shake the audio output hole down several times to allow water to flow out or let it air dry for 1-2 hours, then the sound quality will become normal.

If there is water droplet on the surface, please wipe it with a dry cloth before putting them back into the charging case to avoid demaging the device.

Tip:

1. If the product is dirty, please do not rinse it directly with water or use boiling water to soak and disinfect it. It is recommended to wipe the earbuds with an alcohol cloth or a wet paper towel.

2. If the product falls into the water accidentally, please pick it up in time and dry it with natural wind or dry it in the sun for two hours before using it. (Otherwise it will affect the sound quality, thus fail to give you a better using experience)

3. If there is noise, broken sound, or low sound, please take off the silicone ear cap and wipe it with a cotton swab.

4. If the earbud is not charged properly, wipe the charging column with a cotton swab, and then charge it again.

5. Do not use corrosive liquid to clean this product.

6. If it is stained with any chemicals, please rub it with a wet cloth wet with clean water

7. Do not use this product under extreme circumstances for temperature below -10 degree Celsius or above 60 degree Celsius .

8. To avoid explosion, please do not throw this product into fire.

9. To avoid scratches, please do not let the earbuds expose to sharp objects.

10. Do not insert objects into the earbuds, otherwise it would cause damage to the internal components.

11. Do not disassemble the product.

12. In order to keep their lifetime, please keep regular charge to the earbuds and do not leave them empty battery.

13. Please do not charge products with power adapter over 3A current. Excessive current may cause damage to battery

Battery Warning
There is a built-in lithium battery in this product. To avoid explosion, do NOT expose the product to intense sunlight, fire or throw it into fire.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>