Tcyoatoa WMG01 Heart Shaped Fingerprint Padlock Instruction Manual

Tcyoatoa WMG01 Heart Shaped Fingerprint Padlock

Product Introduction

Please read this manual carefully before using the product and keep it properly.

Indicator Status Description

Basic Parameters

Alloy

Max Fingerprints Store

| 10 pcs fingerprints| Body size (mm)| 51.8 ✖ 37.3 ✖ 14.6
Battery Type| Polymer Battery| Diameter of Beam (mm)| 4
Charging Interface| Micro-USB| Net Weight (g)| 90
Charging Voltage| DC 5.0V – 200 mA| Working Temperature| -20℃ – 45℃
Fully charge time| 40 min| IP Grade| IPX2
Standby Time| 3 – 4 months| Max continue unlocking times| 2,000

Fingerprint Registration

• Please fully charged before use;
• 2 fingerprints must be registered at the first time；
• Register or store a maximum of 10 different fingerprints, and these registered fingerprints have the same permissions;
• This product will delete all the registered fingerprints after reset, and you have to re-register your fingerprints before use again

1. Register 2 fingerprints for the first time

   • In unlocked state, press and hold the fingerprint area until the blue light is on, it is needed around 7s.
     

   • Release your finger and immediately press the fingerprint recognition area 10 times with the same finger at different angles, The first fingerprint is registered with a blue light flashing and finish with the light turns green.
     

   • When the green light on, immediately press the 2nd fingerprint 10 times at different angles, the 2nd fingerprint is registered with green light flashing and finish with the green light turns off.
     

   • Unlock test with your registered fingerprint, unlock with green light means you have successfully registered your fingerprints.
     

   • Unlock with your registered fingerprint with green light flashing;

   • Non-registered fingerprint attempts to open the lock, the red light flashes, unable to unlock.

2. Register more fingerprints
   

   • In unlocked state, press and hold the fingerprint area around 8s with your registered finger until the blue light is on.

   • Register the new fingerprint by pressing 10 times in a row at different angles of your fingerprint, until the green light flashes as the end.

   • If the green light blinks and goes off, it indicates that you have successfully added a new unlock fingerprint command. If the red light blinks and goes off, it indicates that you fail to add the new unlock fingerprint command and you need to do the above steps again.
     
     

3. Reset / Clear the registered fingerprints to factory experience mode

   • Unlock with your registered fingerprint.
     

   • Do not release your fingerprint until the light turns to red and blinking the time of keeping your registered fingerprint on the fingerprint collection area is around 20s。

   • The indicator light will turn blue when holding the recognition area for 6s, and turn red  flashing when 20s。
     

   • Press the same fingerprint on the fingerprint recognition area again immediately when the red light flashing, and then all the registered fingerprints will be deleted when the green light on.
     

INOVATION LEADS LIFE,
SCIENCE & TECHNOLOGY CREATE THE FUTURE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>