RENOGY RSHGWSN-W02W-G1 ONE Core Energy Monitoring and Smart Living Center User Guide

: June 11, 2024
: Renogy

RENOGY RSHGWSN-W02W-G1 ONE Core Energy Monitoring and Smart Living Center

Product Information

The device is compliant with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standards. The device operates without causing harmful interference and must accept any interference received. Changes or modifications not approved by the party responsible for compliance may void the user’s authority to operate the equipment. The device complies with FCC radiation exposure limits and should be installed and operated with a minimum distance of 20cm between the radiator and the user’s body. The device also complies with RF exposure guidelines.

Product Usage Instructions

Ensure that the device is installed and operated with a minimum distance of 20cm between the radiator and your body to comply with FCC radiation exposure limits.
Do not make any changes or modifications to the device that are not expressly approved by the party responsible for compliance, as doing so may void your authority to operate the equipment.
Operate the device without causing any harmful interference to other devices.
Accept any interference received, including interference that may cause undesired operation of the device.
Refer to the Canadian information on RF exposure and compliance guidelines for further information.

Before Getting Started

The quick guide provides important operation and maintenance instructions for Renogy ONE Core (hereinafter referred to as Core). Read the quick guide carefully before operation and save it for future reference. Failure to observe the instructions or precautions in the quick guide can result in electrical shock, serious injury, or death, or can damage the Renogy ONE Core, potentially rendering it inoperable.

Renogy ensures the accuracy, sufficiency, and the applicability of information in the quick guide at the time of printing due to continual product improvements that may occur.
Renogy assumes no responsibility or liability for personal and property losses, whether directly and indirectly, caused by the user’s failure to install and use the product in compliance with the quick guide.
Renogy is not responsible or liable for failures, damages, or injuries resulting from repair attempted by unqualified personnel, improper installation and operation.
The illustrations in the quick guide are for demonstration purposes only. Details may appear slightly different depending on product revision and market region.
Renogy reserves the right to change the information in the quick guide without notice. For the latest quick guide, visit renogy.com.

Online Manual

What’s In the Box

Get to Know RENOGV ONE Core

Installation Site and Environment

RENOGY-RSHGWSN-W02W-G1-ONE-Core-Energy-Monitoring-and-Smart-Living-Center-
fig-4

Required Tools

RENOGY-RSHGWSN-W02W-G1-ONE-Core-Energy-Monitoring-and-Smart-Living-Center-
fig-5

NOTE:

Tools are required only when the Core is flush mounted on a wall.
You can use either a skill saw or an electric drill with a hole saw.

Place Renogy ONE Core on a Table

The package box is environmentally friendly. You can use it as a bracket to hold the Core when installing it on the wall is not required.

NOTE :

The RV leveling function is unavailable on Core when it is placed on a table.

Mounting Template

Please tear off this piece of paper and paste it to the mounting location for drilling holes.

Mount Renogy ONE Core on a Wall

NOTE:

You can also use another piece of paper as the mounting template. The installation hole comes in 2.17 in x 2.17 in (55 mm x 55 mm).

Connect Renogy ONE Core to a Power Supply

You can connect Renogy ONE Core to a power supply through the included power cable or a Type-C cable (not included).

NOTE:

When installing the power cable, always connect the negative first, and then the positive.

Install a Communication Cable (Optional)

For details, see the Renogy ONE Core User Manual by scanning the QR code in the guide.

Power On/Off

Long press the On/Off Button for Ss to power the Core on or off.

Pairing with DC Home

For initial startup, follow the startup wizard on the Core to pair it with the DC Home app. Alternatively, go to 0 > System > Pair with App.

Add Devices

Renogy ONE Core can connect to Bluetooth, Bluetooth mesh, and Zigbee Renogy devices concurrently. RENOGY-RSHGWSN-W02W-G1-ONE-Core-Energy-Monitoring-and-
Smart-Living-Center-fig-14

RV Leveling

NOTE:

RV leveling calibration on Renogy ONE Core is required each time the installation site for the Core is changed.

Important Safety Instructions

Keep Renogy ONE Core out of the reach of children.
Do not dispose of Renogy ONE Core as household waste. Comply with local, state, and federal laws and regulations and use recycling channels as required.
Do not expose Renogy ONE Core to flammable or harsh chemicals or vapors.
There are no serviceable parts in Renogy ONE Core. Do not open, dismantle, repair, tamper with, or modify it.
Confirm the polarities of the devices before connecting Renogy ONE Core to a power supply. A reverse polarity contact can result in damage to the Core, thus voiding the warranty.
Ensure that the connected DC power supply rates at 8V to GOV. Connecting the Core to a power source beyond the range results in a power-on failure or permanent damage to the Core.
You can use an extended power cable on demand. For details, see Renogy ONE Core User Manual by scanning the QR code in the guide.

Ecc Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

RSS Standard

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device. The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm. -French.

Disclaimer:
Renogy ONE Core Quick Guide © 2023 Renogy. All rights reserved.
RENOGY and RENOGY are registered trademarks of Renogy.

All information in the quick guide is subject to copyright and other intellectual property rights of Renogy and its licensors. The quick guide may not be modified, reproduced, or copied, in whole or in part, without the prior written permissions of Renogy and its licensors.
The registered trademarks in the quick guide are the property of Renogy. The unauthorized use of the trademarks is strictly prohibited.

Renogy Empowered

Renogy aims to empower people around the world through education and distribution of DIY-friendly renewable energy solutions. We intend to be a driving force for sustainable living and energy independence. In support of this effort, our range of solar products makes it possible for you to minimize your carbon footprint by reducing the need for grid power.

Live Sustainably with Renogy

Did vou know In a given month. a 1kW solar energy svstem will

Save 170 pounds of coal from being burned
Save 300 pounds of CO2 from being released into the atmosphere
Save 105 gallons of water from being consumed

Renogy Power PLUS

Renogy Power Plus allows you to stay in the loop with upcoming solar energy innovations, share your experiences with your solar energy journey, and connect with like-minded people who are changing the world in the Renogy Power Plus community.

Renogy reserves the right to change the contents of this manual without notice.