KODAK KS07X8000100 Smile + Digital Instant Print Camera Owner’s Manual

June 11, 2024
Kodak

KODAK KS07X8000100 Smile + Digital Instant Print Camera Owner’s Manual
KODAK KS07X8000100 Smile + Digital Instant Print
Camera

Product Regulatory Information

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • orient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FOR PORTABLE DEVICE USAGE ( <20m from body/SAR needed eg. BT
dongle, smartphone)

Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for
an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body.

Industry Canada statement:

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FOR PORTABLE DEVICE USAGE ( <20m from body/SAR needed)

Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Specifications

  • Paper: 2″ x 3″(50x 76 mm) ZINK Photo Paper
  • Power Source: Internal Rechargeable Battery
  • Battery: 500 mAh 2Cell
  • Connectivity: Bluetooth 5.0
  • Recommended storage temperature: -22°F ~ 158°F (-30°C ~ 70°C
  • Recommended storage humidity: 80%
  • Recommended Operating and Charging Temperature: 59°~90°F (15°~32°C)
  • Recommended Operating Humidiy: 40~55% RH | RFH
  • LED Indicator Lights: Printer Status
  • Dimensions: 3.6” W x 5.4” H x 1.5” D (92.5 x 137.4 x 39.1 mm
  • Printing speed: 0.13 ips
REV. NO DESCRIPTION CODE DATE NAME
V0.0 INITIAL KS07X8000100 2022-08-16 EUN11 JO

NOTE: all specifications are subject to change without notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals