HUANANZHI X99-T8DDUAL Motherboard User Manual

HUANANZHI X99-T8DDUAL Motherboard

Product Information

The HUANAN SANXIAN TECHNOLOGY motherboard is a product manufactured by SZ HUANAN SANXIAN TECHNOLOGY CO., LTD. The motherboard supports DDR ECC RAM*DIMM up to GB with a frequency of //MHZ. It has x SATA, x SSATA, x USB, and an RJ45 port. The motherboard comes with Realtek audio and LAN drivers. It has a PCI- EX slot, M.2 NVME PCI-EX slot, and an I/O shield.

Product Usage Instructions

1. Ensure all parts are firmly connected to avoid component recognition failure or computer startup failure.
2. Discharge your body static by touching other metal objects before taking the motherboard out of the box to prevent damage due to electrostatic discharge (ESD).
3. Switch off the power and pull the power cable from the socket before installation or disassembly.
4. Install the X-TD chipset driver and Realtek sound card driver from the provided CD or download them from the manufacturer’s website.
5. Install the LAN driver for your operating system (Windows 7 or Windows 10) from the CD or download it from the manufacturer’s website.
6. Configure BIOS settings to your preference using the CMOS SETUP menu.

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a success-ful computer assembly.
• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
• In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of the motherboard.
• Please put the motherboard in an anti-static container or on an anti-static pad if not needed.
• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
• If you need any assistance in the process of installation，please contact our after-sales customer service or reach us on HUANANZHI official E-mail:business@huananzhi.com for professional technical support.
• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
• Keep the motherboard away from moisture.
• Keep the user manual for future reference.
• Before plugging the power supply, please make sure the socket provides the corresponding voltage.
• In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
• In the event of any of the following conditions, have the board checked by a service technician:
  • Liquid penetrated into the computer.
  • The motherboard is exposed to moisture.
  • Motherboard does not work even if you follow the instructions on user manual.
  • Motherboard fell off to the ground and got damaged.
  • Motherboard has clear signs of damage.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as possible.

• 1*HUANANZHI X99 T8D DUAL motherboard
• 2*SATA data cable
• 1*Driver disk
• 1* User manual
• 1*Warranty Card

BRIEF INTRODUCTION

Features

• CPU: Intel® LGA2011-3 Processor Intel® Xeon™
  E5 2678V3/2676V3/2673V3/2629V3/2649V3/2669V3/2696V3

• RAM: 8* DIMM supports up to 256GB DDR3

  • 1866/1600/1333MHZ DDR3 Non-ECC.ECC memory
  • Quad-Channel Memory Architecture
  • Actual memory data rate depends on CPU type and DRAM module

• 1/O effects: 6 x SATA3.0 (maximum transfer speed up to 6GB/5)

  • 4 x SSATA3.0
  • 4 x USB2.0 interface
  • 4 × USB3.0 ports
  • 2 x RJ45 Network card interface

• Audio: Realtek Audio Transcoder

  • Realtek 7.1 Surround Sound High Definition Audio Codec
  • Audio output: Front Out/Front Speaker Out, Rear Speaker output,
  • Center/Subwoofer output, Optical audio output
  • Audio input: Microphone input, Audio input

• Ethernet: 2 x Realtek PCle Gigabit LAN

• Expansion slot:

  • 3 x PCle 3.0 x16
  • 1 x M.2 NVME PCIE 3.0X4 (KEY M \2242/2260/2280/22110
  • 1 x M.2 NVME PCIE 3.0X4 (KEY M )2242/2260/2280/
  • M.2 NGFF (SATA 3.0)2242/2260/2280

MOTHERBOARD DIAGRAM

Rear I/O Panel

Overall Rear I/O Panel Display

LAN Port Status Table

Audio Port Configuration

Installation And Settings

NOTICE
please check the motherboard where all pins marked with number“ 1 ” or white bold line are position“ 1 ”.

CPU Installation

1. Remove the screw from the screw base
2. Remove the screw base
3. Tighten the screw base screwed into the length M.2 module to the M.2 interface distance hole
4. Insert your M.2 module into the M.2 interface at a 30 degree angle
5. Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base

M.2 Interface Installation

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installa-tion.
2. Align the memory module into the slot and press
3. Let the snaps on both ends of the slot automatically bounce

Memory Installation

Drivers installation

Drivers listing:

Intel Chip Information Installation
Run“ Control Panel – System – Hardware – Device Manager” Click the right mouse button to change the driver’s hardware device and proceed with the installation below:

Option: Propertyl – Update driverl – Not connect to Internet – Manually installation Find the corresponding directory Select “Next step”

Audio driver installation
Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for installation.

Audio driver installation (take HD Audio series for example)

• Run”driver installer”: /X99-T8DAudio/ALC662-32bit_Win7_Win8
  • Win81_Win10_R279/ALC662-64bit_Win7_Win8_Win81_Win10
  • R279.exe
• Click on “next”to continue, and then”finished”
• The system will automatically restart itself to finish the installation

Uninstallation of audio driver(take HD Audio series for example)
Etting into Windows desktop, choose “setting”/ “control”, and then “add/remove programs”. Later, choose “Realtek High Definition Audio Driver” in the menu and click on “add/re- move”so thatthe driver will be automatically removed.

Driver installation of external video card

• Run”driver installer”, take Setup.exe, Click on “next”- “yes”
  • “next”
  • “next”and”finished”h
• The system will automatically search for devices to complete the installation

Driver installation of network
Run “driver installer”: X99-T8DLAN/setup.exe click on “next”- “installation”- “finished”and restart the computer, and restart the computer, The system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in the CMOS SRAM of the motherboard. When the computer is shut down, the motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST (Power On Self Test), press the “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. The motherboard warm boot key is “F7”.

Menu:
Please pay attention to every option in the settings menu. When there is a triangle-shaped symbol on the left side of the menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.

Main Menu Function

• Main

• System Overview
  Date/Time settings, HDD specs/Monitor type settings.

• Advanced
  Advanced Settings
  BIOS special function settings, such as virus alert, booting disk priority etc.

• Chipset
  Advanced Chipset Settings

• Boot
  Boot Settings

• Security
  Security Settings

• Save
  Save Setting

• Exit
  Exit Options

Exit settings include loading of optimized defaults value/ loading of fail- safe defaults / discarding changes/ exiting without saving.Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving.

References

• 华南金牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>