HUANANZHI X99-BD3 Motherboard User Manual

HUANANZHI X99-BD3 Motherboard

Product Information

The X99-BD3 is a motherboard manufactured by SZ HUANAN SANXIAN TECHNOLOGY CO., LTD. The motherboard supports DDR4 RAM, has 3 SATA ports, 2 SATA III ports, 2 USB 3.0 ports, 4 USB 2.0 ports, and an RJ45 port. It has a Realtek LAN chipset and a PCIe slot for expansion. The motherboard also has audio and LED power indicators.

Product Usage Instructions

1. Ensure that all parts are firmly connected to prevent failure of recognizing components or starting the computer.
2. Discharge your body static by touching other metal objects before taking the motherboard out of the box to prevent electrostatic discharge (ESD) that may damage the product.
3. Switch off the power and pull the power cable from the socket prior to installation or disassembly.
4. Install drivers using the provided CD or download them from the manufacturer’s website.
5. Configure BIOS settings as needed using the BIOS setup menu.

BIOS Setup Menu

The BIOS setup menu can be accessed by pressing the Delete key during the Power On Self Test (POST). The menu includes the following options:

• Main: Displays system information such as CPU and RAM details.
• Advanced: Provides advanced BIOS settings such as CPU and RAM overclocking options.
• Chipset: Displays chipset information and provides chipset-related settings.
• Boot: Allows configuration of boot options.
• Security: Provides security-related settings such as password protection.
• Save: Saves changes made in the BIOS setup menu.
• Exit: Exits the BIOS setup menu and restarts the computer.

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a success-ful computer assembly.

• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.

• In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.

• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.

• Please put the motherboard in an anti-static container or on anti-static pad if not needed.

• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.

• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.

• If you need any assistance in the process of installation，please contact our after-sales customer service or reach us on HUANANZHI official E-mail : business@huananzhi.com for professional technical support.
  Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.

• Keep the motherboard away from moisture.

• Keep the user manual for future reference.

• Before plugging the power supply, please make sure the socket provides the corresponding voltage.

• In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.

• In the event of any of the following conditions, have the board checked by a service technician: Liquid penetrated into the computer. Motherboard is exposed to moisture.

Motherboard does not work even if you follow the instructions on user manual.
Motherboard fell off to the ground and got damaged. Motherboard has clear signs of damage.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as
possible.

1. 1 HUANANZHI X99 -BD3 Motherboard
2. 2 SATA Data cable
3. 1 I/O Shield back plat
4. 1 User manual
5. 1 Warranty Card

BRIEF INTRODUCTION

Features

• CPU: Intel® LGA2011-3 Pin V3 Processor Intel® Xeon™

  • E5 2678V3/2676V3/2673V3/2629V3/2649V3/2669V3/2696V3

• RAM: 4 DIMM supports up to 128GB DDR3

  • 1866/1600/1333MHZ Non-ECC.ECC memory
  • Ouad-Channel Memory Architecture
  • Actual memory data rate depends on CPU type and DRAM module

• 1/O effects: 4 x SATA3.0 (maximum transfer speed up to 6GB/5)

  • 2 × SATA2.0 (maximum transfer speed up to 3GB/s)
  • 6 × USB2.0 interface
  • 2 x USB3.0 ports
  • 1 x RJ45 Network card interface

• Audio: Realtek Audio Transcoder

  • Realtek 5.1 Channel High Fidelity Audio
  • Audio output:Front Out/Front Speaker Out
  • Audio input:Microphone input, Audio input

• Ethernet: 1 x Realtek PCle Gigabit LAN
  Expansion slot: 2 x PCle 3.0 x16

  • 1 x PCle 2.0 x 1
  • 1 x PCle 3.0 x 4
  • 1 x M.2 NVME PCle 3.0X4 (key M) 2242/2260/2280
  • 1 X M.2 NGFF(SATA 3.0) 2242/2260/2280

MOTHERBOARD IMAGE

1-1 X99-BD3 Motherboard Illustration

Rear I/O Panel

1-2 Overall Rear I/O Panel Display

1-3 LAN Port Status Table

1-4 Audio Port Configuration

Installation And Settings

NOTICE: please check the motherboard where all pins marked with number “1” or white bold line are position “¡”

2-7 PU Installatior

1. Remove the screw from the screw base
2. Remove the screw base
3. Tighten the screw base screwed into the length M.2 module to the M.2 interface distance hole
4. Insert your M.2 module into the M.2 interface at a 30 degree angle
5. Place the screw on the trailing edge notch of vour M.2 module and tighten to the screw base

2 -8 M.2 Interface Installation

1. Pull the clips on both ends of the memory slot outward, and the memory strip corre- sponds to the protruding position of the slot to determine the direction of installation.
2. Align the memory module into the slot and press
3. Let the snaps on both ends of the slot automaticallv bounce

2-9 Memory Installation

1. Use a screwdriver to remove the bezel and screws on the main unit
2. Need to pick up the card slot of the card slot when installing the graphics card
3. Insert the graphics card into the card slot of the graphics card
4. After the installation is in place, the chuck will automati© cally return to its position.
5. Secure the graphics card to the chassis with screws
6. Install the power cord

2-10 Graphics Card Installation

2 -11 SATA Interface

Drivers installation

1. Drivers listing
2. Intel Chip Information Installation
3. Run “Control Panel – System – Hardware – Device Manager”
4. Click the right mouse button to change the driver’s hardware device and proceed with the installation below:
5. Option: Property – Update driver – Not connect to Internet –

  * Manually installation
  * Find the corresponding directory
  * Select “Next step”

3. Audio driver installation
   Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for installa- tion.
   Audio driver installation (take HD Audio series for example)
   Run “driver installer”: /X99-BD3 AUDIO DRIVER/64bit_Win7_Win8_Win 8.1.exe/64bit_Win8_Win8.1_Win10.exe
   Click on “next”to continue,and then “finished”
   The system will automatically restart itself to finish the installation
   Uninstallation of audio driver(take HD Audio series for example)
   Getting into Windows desktop, choose “setting”/ “control”, and then “add/remove programs”. Later, choose “Realtek High Defi- nition Audio Driver” in the menu and click on “add/remove”so thatthe driver will be automatically removed.o

4. Driver installation of external video card
   Run “driver installer”, take Setup.exe, Click on “next”-“yes” “next” -“next”and”finished”h
   The system will automatically search for devices to complete the installation

5. Driver installation of network
   Run “driver installer”: X99-BD3 LAN DRIVER /Install_Win7 network card driver/Install_Win10 network card driver/setup.exe click on “next”-
   “Installation”- “finished”and restart the computer, and restart the computer, The system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boot key is “F7′

Menu: please pay attention to every option in the settings menu. When there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.

Main Menu Function

• Main

• System Overview
  Date/Time settings, HDD specs/Monitor type settings.

• Advanced
  Advanced Settings
  BIOS special function settings, such as virus alert, booting disk
  priority etc.

• Chipest
  Advanced Chipest Settings

• Boot
  Boot Settings

• Security
  Security Settings

• Save
  Save Setting

• Exit
  Exit Options
  Exit settings include loading of optimized defaults value/ loading of fail- safe defaults / discarding changes/ exiting without saving.Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding chang- es/ exiting without saving.

References

• 华南金牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>