HUANANZHI X99-8MD3 Motherboard User Manual

User Manual
X99-8MD3

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a successful computer assembly.
• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
• In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
• Please put the motherboard in an anti-static container or on anti-static pad if not needed.
• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
• If you need any assistance in the process of installation please contact our after-sales customer service or reach us on HUANANZHI official E-mail: business@huananzhi.com for professional technical support.
• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as
possible.
1.1HUANANZHI X99-8MD3 Motherboard
2.1SATA data cable
3.1I/O shield back plat
4.1User manual
5.1* Warranty card

BRIEF INTRODUCTION

Features

CPU: Intel ® LGA2011-3 Intel ® Xeon ™
Support XeonE5 2678V3/2676V3/2673V3/2629V3/2649V3/
2669V3/2696V3
RAM: 2*DIMM supports up to 64GB DDR3
1866/1600/1333MHZ Non-ECC. ECC memory
Two-Channel Memory Architecture
Actual memory data rate depends on CPU type and DRAM module
1/0 effects: 4x SATA3.0(maximum transfer speed up to 6GB/s)
2xUSB2.0 interface
4xUSB2.0 interface
1xPS/2 Mouse and Keyboard port
1xRJ45 Network card interfacet
Audio: Realtek Audio Transcoder
Realtek 5.1 Channel High Fidelity Audio
Audio output: Front Out/Front Speaker Out
Audio input: Microphone input, Audio input
Ethernet: 1x Realtek PCle Gigabit LAN
Expansion slot: 1x PCle3.0x16
2xPClex1
1xM.2 NVME PCle 3.0X4 (KYE M)2242/2260/2280

MOTHER BOARD IMAGE

1-1X99-8MD3 Motherboard illustration

Rear 1/0 Panel

Installation And Settings

NOTICE
please check the motherboard where’ll pins marked with number “1” or white bold line are position “1”.

• In or der to properly place the CPU in the motherboard he surface of the LGA2011 CPU has two pairs of starting points and a golden Trian- e Galego n triangle indicates Pin l

2-8 M.2Interface Installation

1. Remove the screw from the screw base
2. Remove the screw base
3. Tighten the screw base screwed into the length M.2 module to the M_2interface distance hole
4. Insert your M.2 module into the M2interface at a 30 degree angle
5. Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base

2-9 Memory Installation

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installa- tion.
2. Align the memory module into theslotand press
3. Let the snaps on both ends of the slot automatically bounce

2-10 Graphics Card Installation

1. Use screwdriver to remove the bezel and screws on the main unit
2. Need to pick up the card slot of the card slot when installing the graphics card
3. insert the graphics card into the card slot of the graphics card
4. After the installation is in place, the chuck will automatically return to its position.
5. Secure the graphics card to the chassis with screws
6. .Install the power cord

Drivers installation

1. Drivers listing:
   Driver Directory| Driver Description,.| Operating system
   ---|---|---
   X99 Chipset Driver| Intel chip information installation| win7/win10
   X99 Sound Card Driver| Realtek series sound card driver installation| win7/win10
   X99 LAN Driver| Realtek network card driver installation| win7/win10

2. Intel Chip Information Installation
   Run “Control Panel – System – Hardware – Device Manager” Click the right mouse button to change the driver’s hardware device and proceed with the installation below:
   Option: Property! – Update driver – Not connect to Internet – Manually installation
   Find the corresponding directory Select “Next step”

3. Audio driver installation
   Before this installation, please check the model of the audio chip onthe motherboard first(you may refer to this manual),
   Select the proper driver accordingly for installation.
   3.1 Audio driver installation (take HD Audio series for example)
   Run “driver installer”: /X79 SOUND CARD DRIVER/ VISTAWINT-R26T, take WDW-267 if OS is XP
   Click on “next” to continue, and then” finished” The system will automatically restart itself to finish the installation
   3.2 Uninstallation of audio driver(take HD Audio series for example)
   Getting into Windows desktop, choose “setting”/ “control’, and then “add/remove programs”. Later, choose “Realtek High Definition Audio Driver” in the menu and click on “add/re- move” so thatthe driver will be automatically removed..

4. Driver installation of external video card
   Run “driver installer’ take Setup.exe, click on “ne: yes ext.” ~“next” and “finished”
   The system will automatically search for devices to complete the installation

5. Driver installation of network
   Run “driver installer”: X79 LAN DRIVER/WINT XP click on “next” “installation”- “finished” and restart the computer, and restart the computer, The system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boot key is “F7”
Menu: please pay attention to every option in the settings menu.
When there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu, so a pop-up sub-menu will be available.
Main Menu Function

• Main

• System Overview
  Date/Time settings, HDD specs/Monitor type settings.

• Advanced
  Advanced Settings
  BIOS special function settings, such as virus alert, booting disk priority efc.

• Chipset
  Advanced Chipset Settings

• Boot
  Boot Settings

• Security
  Security Settings

• Save
  Save Setting

• Exit
  Exit Options

Bt settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving. Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding chant- es/ exiting without saving.

SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD.
WWW.HUANANZHI.COM
BIOS Settings

References

• 华南金牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>