HUANANZHI X79 GREEN Motherboard User Manual

User Manual
X79GREEN

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a successful computer assembly.
• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
• In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
• Please put the motherboard in an anti-static container or on anti-static pad if not needed.
• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
• If you need any assistance in the process of installation please contact our after-sales customer service or reach us on HUANANZHI official E- ail: business@huananzhi.com for professional technical support.
• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
• Keep the motherboard away from moisture.
• Keep the user manual for future reference.
• Before plugging the power supply, please make sure the socket provides the corresponding voltage.
• In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
• In the event of any of the following conditions, have the board checked by a service technician:
  Liquid penetrated into the computer.
  Motherboard is exposed to moisture.
  Motherboard does not work even if you follow the instructions on user manual.
  Motherboard fell off to the ground and got damaged.
  Motherboard has clear signs of damage.

PACKING

• Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as possible.
  1.1HUANANZHI X79 GreenV2.1Motherboard
  2.1SATA data cable
  3.1I/O shield back plat
  4.1 User Manual
  5.1*Warranty Card

BRIEF INTRODUCTION

Features
CPU: Intel® LGA2011-3 Processor Intel® Xeon™
Intel® LGA2011 Processor I7 Series 3/4 Generation Intel® Core™
RAM: 4*DIMM supports up to 128GB DDR3
1866/1600/1333MHZ Non-ECC.ECC memory
Quad-Channel Memory Architecture Actual memory data rate depends on CPU type and DRAM module
I/O effects: 2 x SATA3.0 (maximum transfer speed up to 6GB/s)
4x SATA2.0
6 x USB2.0 interface
2 x USB3.0 ports
1 x PS/2 Mouse and Keyboard port
1x RJ45 Network card interface
Audio: Realtek Audio Transcoder Realtek 7.1 Surround Sound High Definition Audio Codec
Audio output: Front Out/Front Speaker Out, Rear Speaker output, Center/Subwoofer output, Optical audio output
Audio input: Microphone input, Audio input
Ethernet: 1 x Realtek PCle Gigabit LAN
Expansion slot: 2 x PCle 3.0 x16
1x PCle x4
2x PCle x1
1 xM.2 NVME PCle 3.0X4 (key M)2242/2260/2280
1x M.2 NGFF(SATA3.0)2242/2260/2280

MOTHER BOARD IMAGE

1-1 X79 GREEN V2.1 Motherboard illustration

Rear I/O Panel

1-2 Overall Rear I/O Panel Display 1-3 LAN Port Status Table

1-4 Audio Port Configuration

Installation And Settings

NOTICE
please check the motherboard where all pins marked with number “1” or white bold line are position “1”.

• In or der to properly place the CPU in the motherboard he surface of the LGA2011 CPU has two pairs of starting points and a golden Trian- e Galego n triangle indicates Pin l

1. Remove the screw from the screw base
2. Remove the screw base
3. Tighten the screw base screwed into the length M.2 module to the M_2interface distance hole
4. Insert your M.2 module into the M2interface at a 30 degree angle
5. Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base

2-9 Memory Installation

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installa- tion.
2. Align the memory module into theslotand press
3. Let the snaps on both ends of the slot automatically bounce
   2-10 Instruction of dial – code switch
   3.5ATA/m. 2NGFF both unavailable
   Note :SATAD 3.0 interface and The M2 NGFF interface only works Dial either one, Not used at the same time.
   Do not dial all the code to the ON location, it will cause a short circuit

2-11 Graphics Card Installation

1. Use a screwdriver to remove the bezel and screws onthe main unit
2. Need to pickup the card slot of the card slot when installing the graphics card
3. Insert the graphics card into the card slot of the graphics card
4. After the installation is in place, the chuck will automatically return to its position.
5. Secure the graphics card to the chassis with screws
6. Install the power cord

2-12 SATA interface

Drivers installation

1. Drivers listing:
   Driver Directory| Driver Description,.| Operating system
   ---|---|---
   X79 Chipset Driver| Intel chip information installation| winEwin10
   X79 Sound Card Driver| Realtek series sound card driver installation| win7/win10
   X79 LAN Driver| Realtek network card driver installation| win7/win10

2. Intel Chip Information Installation
   Run “Control Panel – System – Hardware – Device Manager” Click the right mouse button to change the driver’s hardware device and proceed with the installation below:
   Option: Property! – Update driver – Not connect to Internet – Manually installation
   Find the corresponding directory Select “Next step”

3. Audio driver installation
   Before this installation, please check the model of the audio chip onthe motherboard first(you may refer to this manual),
   Select the proper driver accordingly for installation.
   3.1 Audio driver installation (take HD Audio series for example)
   Run “driver installer”: /X79 SOUND CARD DRIVER/ VISTAWINT-R26T, take WDW-267 if OS is XP
   Click on “next” to continue, and then” finished” The system will automatically restart itself to finish the installation
   3.2 Uninstallation of audio driver(take HD Audio series for example)
   Getting into Windows desktop, choose “setting”/ “control’, and then “add/remove programs”. Later, choose “Realtek High Definition Audio Driver” in the menu and click on “add/re- move” so thatthe driver will be automatically removed..

4. Driver installation of external video card
   Run “driver installer’ take Setup.exe, click on “ne: yes ext.” ~“next” and “finished”
   The system will automatically search for devices to complete the installation

5. Driver installation of network
   Run “driver installer”: X79 LAN DRIVER/WINT XP click on “next” “installation”- “finished” and restart the computer, and restart the computer, The system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard’ s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boat key is “F7″.
Menu: please pay attention to every option in the settings menu. When there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu, so a pop-up sub-menu will be available.
Main Menu Function

• Main

• System Overview
  Date/Time settings, HDD specs/Monitor type settings.

• Advanced
  Advanced SettingsBoot| security| save|  Exit
  ---|---|---|---

BIOS special function settings, such as virus alert, booting disk priority etc.

• Chipset
  Advanced Chipset Settings

• Boot
  Boot Settings

• Security
  Security Settings

• Save
  Save Setting

• Exit
  Exit Options

Bt settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving. Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding chant- es/ exiting without saving.

SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD.
WWW.HUANANZHIL.COM
BIOS Settings

References

• 华南金牌官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>