Kosnic Niva Go Interior LED Batten Instruction Manual
- June 11, 2024
- Kosnic
Table of Contents
Kosnic Niva Go Interior LED Batten
Product Information
The LED Batten Niva Go is a lighting product manufactured by Kosnic Lighting Ltd. The product comes in different models, namely NIVG4FS18-W40, NIVG4FT27-W40, NIVG5FS27-W40, NIVG5FT44-W40, NIVG6FS36-W40, and NIVG6FT63-W40. The product is equipped with a microwave sensor and contains a light source of energy class D, which is defined as the LED module and the diffuser of the product itself.
Product Usage Instructions
- Before using the product, read through the instructions thoroughly and retain them for future reference.
- Install the product in a suitable location according to the installation instructions provided in the manual.
- Connect the product to a power source according to the electrical wiring instructions provided in the manual.
- Once connected, turn on the power source to activate the microwave sensor and the LED light source.
- The product can be turned off by disconnecting it from the power source.
- Dispose of the product according to the recycling instructions provided in the manual.
Note: For any issues or concerns regarding the product, please refer to the contact details provided on the Kosnic Lighting website (www.kosnic.com).
Safety Information
- Installation must be carried out in accordance with national building and wiring regulations. If you are in any doubt about installing this product, please consult a qualified electrician.
- Before commencing installation or any maintenance, turn off and isolate the circuit to be worked on by removing the fuse or switching the circuit breaker off at the distribution board.
- This product is suitable for connection to a 220-240Vac 50/60Hz supply.
- If connecting the luminaire to independent sensors or time switches, ensure that the control device does not leak a voltage across the luminaire in the off state. Leaked voltages may accumulate and cause intermittent flashes in the off state.
- Ensure personal protective equipment is used during installation.
- When drilling holes take care not to damage existing wiring or pipework.
- Seek assistance when carrying or transporting heavy or bulky products, ensure correct manual handling practice is used.
- Take care to avoid trapping fingers or skin when opening or closing diffuser clips.
Note: for Optional Emergency and Microwave Sensor
- Follow the detailed instructions supplied with the emergency module for additional details.
- Set the sensor according to the the instructions provided with the Microwave Sensor.
Light Source Information
- This product contains a light source of energy class D.
- The light source is defined as the LED module and the diffuser of the product itself.
Notes for disassembly and disposal at end of product life:
At the end of product life, the product should be disconnected from the mains
supply by a suitably qualified person and dismantled into its constituent
parts prior to disposal. Only commonly available tools* such as screwdrivers,
knives, soldering irons, spanners, pliers etc should be used and appropriate
safety measures taken during their use. Parts such as LED strips, LED panels,
electrical control gear, wiring, plastic diffusers, metal components such as
back plates or heatsinks should all be separated from the product and disposed
of via appropriate waste streams. Please consult your local authority for WEEE
recycling and disposal options. List of commonly available tools is not
comprehensive, if in any doubt please contact Kosnic.
Installation Instruction
Optional Emergency Module Installation
Optional Microwave Sensor Installation
Wiring Diagram for Microwave Sensor and Emergency Module
The Waste Electrical & Electronic Equipment Regulations (WEEE) require that products bearing this symbol must not be disposed of with household waste as they may contain substances harmful to the environment. The Local Authority can provide advice on recycling.
Kosnic Lighting Ltd, Unit 2, Kennetside, Bone Lane, Newbury, RG14 5PX, UK Page 4 Kosnic Lighting France, 2 bis Avenue Irene Joliot-Curie, 77700 Bailly- Romainvilliers, France
References
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>