Kosnic KRU25-DS-SCT Kabru 45W Low Glare Exterior Wall Mount LED Luminaire Instructions
- June 9, 2024
- Kosnic
Table of Contents
Kabru exterior wall mount LED luminaire
Products Covered:
KRU25/DS-SCT
KRU45/DS-SCT
Instructions
KRU25-DS-SCT Kabru 45W Low Glare Exterior Wall Mount LED Luminaire
Please read these instructions thoroughly before use and retain for future reference.
Safety Information
- Installation must be carried out in accordance with national building and wiring regulations. If you are in any doubt about installing this product, please consult a qualified electrician.
- Before commencing installation or any maintenance, turn off and isolate the circuit to be worked on by removing the fuse or switching the circuit breaker off at the distribution board.
- The LED module light source contained in this luminaire shall only be replaced by the manufacturer, service agent or a similar qualified person.
- This product is suitable for connection to a 220240Vac 50/60Hz supply.
- If connecting the luminaire to independent sensors or time switches, ensure that the control device does not leak a voltage across the luminaire in the off state. Leaked voltages may accumulate and cause intermittent flashes in the off state.
- When drilling holes take care not to damage existing wiring or pipework.
- When adjusting angle of luminaire, take care to mitigate any risk of trapped fingers or skin.
- Seek assistance where handling or installing heavy and/or cumbersome products.
Note for Optional Emergency
- Follow the detailed instructions supplied with the emergency module for additional details.
Light Source Information
This product contains a light source of energy class E.
The light source is defined as the LED module and metal body of the product,
not including the lens/diffuser or connection box.
Notes for disassembly and disposal at end of product life:
At the end of product life, the product should be disconnected from the mains
supply by a suitably qualified person and dismantled into its constituent
parts prior to disposal. Only commonly available tools such as screwdrivers,
knives, soldering irons, spanners, pliers etc should be used and appropriate
safety measures taken during their use. Parts such as LED strips, LED panels,
electrical control gear, wiring, plastic diffusers, metal components such as
back plates or heatsinks should all be separated from the product and disposed
of via appropriate waste streams. Please consult your local authority for WEEE
recycling and disposal options.
List of commonly available tools is not comprehensive, if in any doubt please contact Kosnic.
Installation Instructions
Optional Emergency Module Installation (Only For KRU45/DS-SCT)
**** The Waste Electrical & Electronic Equipment Regulations (WEEE) require that products bearing this symbol must not be disposed of with household waste as they may contain substances harmful to the environment. The Local Authority can provide advice on recycling.
Instruction Kabru KRUxx.DS-SCT V1.1
Kosnic Lighting Ltd, Unit 2, Kennetside, Bone Lane, Newbury, RG14 5PX, UK
Kosnic Lighting France, 2bis Avenue Irene Joliot-Curie, 77700 Bailly-
Romainvilliers, France
www.kosnic.com
References
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting