Kosnic KBHDDC11S44 Pico Bulkhead for LED DD Lamps Instruction Manual

June 9, 2024
Kosnic

Kosnic KBHDDC11S44 Pico Bulkhead for LED DD Lamps

Kosnic-KBHDDC11S44-Pico-Bulkhead-for-LED-DD-Lamps-
PRODUCT

Product Information

The Pico Bulkhead is a lighting fixture that is designed to be used with LED DD Lamps. The product is available in three different models – KBHDDC11S44, KBHDDC12S44, and KBHDDC13S44. The product is manufactured by Kosnic Lighting Ltd and is covered by the Waste Electrical & Electronic Equipment Regulations (WEEE).

Product Usage Instructions

  1. Before using the Pico Bulkhead, please read the instructions provided thoroughly and retain them for future reference.
  2. The Pico Bulkhead is designed to be used with LED DD Lamps. Ensure that the lamps being used are compatible with the product model.
  3. Install the Pico Bulkhead on a flat and stable surface using the provided mounting hardware.
  4. Connect the LED DD Lamps to the product hublot or paratia as per the manufacturer’s instructions.
  5. The Pico Bulkhead can be turned on and off using a switch connected to the power supply.
  6. Do not dispose of the product with household waste as it may contain substances harmful to the environment. Contact your local authority for advice on recycling.

Please read these instructions thoroughly before use and retain for future reference.

Safety Information

  • Installation must be carried out in accordance with national building and wiring regulations. If you are in any doubt about installing this product, please consult a qualified electrician.
  • Before commencing installation or any maintenance, turn off and isolate the circuit to be worked on by removing the fuse or switching the circuit breaker off at the distribution board.
  • This product is suitable for connection to a 220-240Vac 50/60Hz supply.
  • This product is IP44 rated when ceiling mounted.
  • This product is suitable for Kosnic GR10q (4-pin) LED DD lamps. The KBHDDC11S44 is restricted to the 9W lamps.
  • If connecting the luminaire to independent sensors or time switches, ensure that the control device does not leak a voltage across the luminaire in the off state. Leaked voltages may accumulate and cause intermittent flashes in the off state.
  • When drilling holes take care not to damage existing wiring or pipework.Installation must be carried out in accordance with national building and wiring regulations. If you are in any doubt about installing this product, please consult a qualified electrician.
  • Before commencing installation or any maintenance, turn off and isolate the circuit to be worked on by removing the fuse or switching the circuit breaker off at the distribution board.
  • This product is suitable for connection to a 220-240Vac 50/60Hz supply.
  • This product is IP44 rated when ceiling mounted.
  • This product is suitable for Kosnic GR10q (4-pin) LED DD lamps. The KBHDDC11S44 is restricted to the 9W lamps.
  • If connecting the luminaire to independent sensors or time switches, ensure that the control device does not leak a voltage across the luminaire in the off state. Leaked voltages may accumulate and cause intermittent flashes in the off state.
  • When drilling holes take care not to damage existing wiring or pipework.

www.kosnic.com

Products Covered:

  • KBHDDC11S44
  • KBHDDC12S44
  • KBHDDC13S44

Note for Optional Emergency Module

  • The optional emergency modules can only be fitted in the larger KBHDDC12S44 and KBHDDC13S44 versions of the bulkhead.
  • Follow the detailed instructions supplied with the emergency module for additional details.

Notes for disassembly and disposal at end of product life:

At the end of product life, the product should be disconnected from the mains supply by a suitably qualified person and dismantled into its constituent parts prior to disposal. Only commonly available tools* such as screwdrivers, knives, soldering irons, spanners, pliers etc should be used and appropriate safety measures taken during their use. Parts such as LED strips, LED panels, electrical control gear, wiring, plastic diffusers, metal components such as back plates or heatsinks should all be separated from the product and disposed of via appropriate waste streams. Please consult your local authority for WEEE recycling and disposal options.
List of commonly available tools is not comprehensive, if in any doubt please contact Kosnic.

FEATURES

INSTALLATION INSTRUCTION

Kosnic-KBHDDC11S44-Pico-Bulkhead-for-LED-DD-
Lamps-FIG- \(2\) Kosnic-KBHDDC11S44
-Pico-Bulkhead-for-LED-DD-Lamps-FIG- \(3\)

Optional Emergency Module Installation

(Only For KBHDDC12S44 and KBHDDC13S44)
Kosnic-KBHDDC11S44-Pico-Bulkhead-for-LED-DD-Lamps-FIG-
\(4\) Kosnic-KBHDDC11S44-Pico-Bulkhead-
for-LED-DD-Lamps-FIG- \(5\)

The Waste Electrical & Electronic Equipment Regulations (WEEE) require that products bearing this symbol must not be disposed of with household waste as they may contain substances harmful to the environment. The Local Authority can provide advice on recycling.
Instruction LED Bulkhead Pico KBHDDC11.C12.C13S44 V1.2
Kosnic Lighting Ltd, Unit 2, Kennetside, Bone Lane, Newbury, RG14 5PX, UK Kosnic Lighting France, 88, Avenue de l’Europe, 77184, Emerainville, France

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Kosnic User Manuals

Related Manuals