Kosnic Echo III Pro LED Circular High Bay Luminaire Installation Guide
- June 9, 2024
- Kosnic
Table of Contents
Echo III Pro LED Circular High Bay Installation
Products Covered:
ECH3P120-W40
ECH3P120-W50
ECH3P200-W50
Please read these instructions thoroughly before use and retain for future reference.
Safety Information
- Installation must be carried out in accordance with national building and wiring regulations. If you are in any doubt about installing this product, please consult a qualified electrician.
- Before commencing installation or any maintenance, turn off and isolate the circuit to be worked on by removing the fuse or switching the circuit breaker off at the distribution board.
- This product is suitable for connection to a 100240Vac 50/60Hz supply.
- The surge protection on this product may be damaged by electrical tests. Isolate this product before performing electrical tests to prevent false negative results.
- Ensure appropriate personal protective equipment is used during installation.
- When drilling or cutting holes take care not to damage existing pipework or wiring.
- Do Not carry the product by its cable, damage may occur and will invalidate any warranty.
- Seek assistance when carrying or transporting heavy or bulky products, ensure correct manual handling practice is used.
Note for Optional Emergency and Microwave Sensor
- Follow the detailed instructions supplied with the emergency module for additional details.
- Refer to sensor instructions for adjusting settings via remote control.
Light Source Information
ECH3P120-W40, ECH3P120-W50 contain a light source of energy class B.
ECH3P200-W50 contain a light source of energy class C
The light source is defined as the LED module and themain body of the product
itself.
Notes for disassembly and disposal at end of product life:
At the end of product life, the product should be disconnected from the mains
supply by a suitably qualified person and dismantled into its constituent
parts prior to disposal. Only commonly available tools such as screwdrivers,
knives, soldering irons, spanners, pliers etc should be used and appropriate
safety measures taken during their use. Parts such as LED strips, LED panels,
electrical control gear, wiring, plastic diffusers, metal components such as
back plates or heatsinks should all be separated from the product and disposed
of via appropriate waste streams. Please consult your local authority for WEEE
recycling and disposal options.
List of commonly available tools is not comprehensive, if in any doubt please contact Kosnic.
Installation Instruction
Optional Emergency Module Installation
Optional Microwave Sensor(MWS-ZGA)
Shade Installation
The Waste Electrical & Electronic Equipment Regulations (WEEE) require that
products bearing this symbol must not be disposed of with household waste as
they may contain substances harmful to the environment. The Local Authority
can provide advice on recycling.
Instruction LED Circular Highbay Echo III Pro ECH3Pxxx-Wxx V1.1
Kosnic Lighting Ltd, Unit 2, Kennetside, Bone Lane, Newbury, RG14 5PX, UK
Kosnic Lighting France, 2 bis Avenue Irene Joliot-Curie, 77700 Bailly-
Romainvilliers, France
References
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>