Kosnic NEV2328-SCT Nevis LED Panel Installation Guide
- June 9, 2024
- Kosnic
Table of Contents
Kosnic NEV2328-SCT Nevis LED Panel
Product Information
The Nevis LED Panel is a lighting product manufactured by Kosnic Lighting Ltd. The product model covered in these instructions is NEV2328-SCT. The product contains an LED module and backplate as its light source, which is classified as energy class D. The product comes with installation instructions and information on recycling.
Product Usage Instructions
- Before use, read the instructions thoroughly and retain them for future reference.
- Ensure that the product model is NEV2328-SCT.
- Follow the installation instructions provided in the manual for proper installation of the LED panel.
- Do not dispose of the product with household waste, as it may contain substances harmful to the environment. Contact your Local Authority for advice on recycling the product.
Please read these instructions thoroughly before use and retain for future reference.
Safety Information
- Installation must be carried out in accordance with national building and wiring regulations. If you are in any doubt about installing this product, please consult a qualified electrician.
- Before commencing installation or any maintenance, turn off and isolate the circuit to be worked on by removing the fuse or switching the circuit breaker off at the distribution board.
- This product is suitable for connection to a 220 240Vac 50/60Hz supply.
- The drivers are a class II product not requiring an Earth connection though a terminal marked E is pro vided for Earth continuity and are IP20 rated for indoor use only.
- Ensure suitable protective equipment is used and worn where required.
- When drilling holes take care not to damage existing wiring or pipework.
- Seek assistance where handling or installing h eavy and/or cumbersome products.
Optional Gears and Accessories Information
- The LED panels are compatible with the optional emergency modules which can power the panels at a reduced output in the event of a power failure. Please refer to instructions included with the emergency modules for installation.
- Alt ernative drivers may be available for dimming the panels. Please refer to alternative driver instructions for additional wiring requirements.
Light Source Information
This product contains a light source of energy class D. The light source is defined as the LED module and backplate of the product itself
Notes for disassembly and disposal at end of product life:
At the end of product life, the product should be disconnected from the mains
supply by a suitably qualified person and dismantled into its constituent
parts prior to disposal. Only common ly available tools* such as screwdrivers,
knives, soldering irons, spanners, pliers etc should be used and appropriate
safety measures taken during their use. Parts such as LED strips, LED panels,
electrical control gear, wiring, plastic diffusers, metal c omponents such as
back plates or heatsinks should all be separated from the product and disposed
of via appropriate waste streams. Please consult your local authority for WEEE
recycling and disposal options. List of commonly available tools is not
compreh ensive, if in any doubt please contact Kosnic.
INSTALLATION INSTRUCTIONS
Suspension Mounting
DISPOSAL
The Waste Electrical & Electronic Equipment Regulations (WEEE) require that
products bearing this symbol must not be disposed of with household waste as
they may contain substances harmful to the environment. The Local Authority
can provide advice on recycling.
Kosnic Lighting Ltd, Unit 2, Kennetside, Bone Lane, Newbury, RG14 5PX, UK Instruction LED Panel Nevis NEV2328-SCT V1.1
References
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>