Kosnic Vida LED Panel Downlight with Surface Mount Frame Options Instruction Manual
- June 11, 2024
- Kosnic
Table of Contents
Kosnic Vida LED Panel Downlight with Surface Mount Frame Options
Product Information
The Vida LED Panel Downlight is a lighting fixture that is available with surface-mount frame options. It comes in three different sizes: VID4IN06, VID6IN12, and VID8IN22. Additionally, there are three surface-mount frame options available for each size: VID4IN-SMT, VID6IN-SMT, and VID8IN-SMT. The product contains an LED module and backplate that is classified as energy class E.
Product Usage Instructions
- Before using the Vida LED Panel Downlight, please read the instructions thoroughly and retain them for future reference.
- Choose the appropriate size and surface-mount frame option for your needs.
- Install the Vida LED Panel Downlight according to the manufacturer’s instructions.
- Use the light source responsibly and do not try to disassemble the product unless absolutely necessary.
- If you need to dispose of the product at the end of its life, please follow the manufacturer’s instructions for disassembly and disposal. Note that a comprehensive list of tools is not provided, so if in doubt, please contact Kosnic.
Vida LED Panel Downlight with surface-mount frame options
- Please read these instructions thoroughly before use and retain for future reference.
Products Covered:
- VID4IN06
- VID6IN12
- VID8IN22
- VID4IN-SMT
- VID6IN-SMT
- VID8IN-SMT
Safety Information
- Before commencing installation or any maintenance, turn off and isolate the circuit to be worked on by removing the fuse or switching the circuit breaker off at the distribution board.
- Installation must be carried out in accordance with national building and wiring regulations. If you are in any doubt about installing this product, please consult a qualified electrician.
- This product is suitable for connection to a 220-240Vac 50/60Hz supply.
- Ensure appropriate Personal Protective Equipment is used during installation.
- When cutting holes, drilling or screwing beware of joists and take care not to damage existing wiring or pipework.
- Care should be taken when fitting to ensure fingers are not trapped by the retention brackets.
- Care should be taken to avoid trapping or pinching of fingers/skin when securing the terminal cover.
Light Source Information:
This product contains a light source of energy class E. The light source is
defined as the LED module and backplate of the product itself only.
Notes for disassembly and disposal at end of product life:
At the end of product life, the product should be disconnected from the mains
supply by a suitably qualified person and dismantled into its constituent
parts prior to disposal. Only commonly available tools* such as screwdrivers,
knives, soldering irons, spanners, pliers etc should be used and appropriate
safety measures taken during their use. Parts such as LED strips, LED panels,
electrical control gear, wiring, plastic diffusers, metal components such as
back plates or heatsinks should all be separated from the product and disposed
of via appropriate waste streams. Please consult your local authority for WEEE
recycling and disposal options.
- List of commonly available tools is not comprehensive, if in any doubt please contact Kosnic.
INSTALLATION INSTRUCTION
Surface mount
The Waste Electrical & Electronic Equipment Regulations (WEEE) require that products bearing this symbol must not be disposed of with household waste as they may contain substances harmful to the environment. The Local Authority can provide advice on recycling.
References
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
- Kosnic: New age of lighting - Designers and manufacturers in LED Lighting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>