POWERTECH HS-9062 Phone Cradle with 15W Wireless Charger User Manual
- June 11, 2024
- POWERTECH
Table of Contents
POWERTECH HS-9062 Phone Cradle with 15W Wireless Charger User Manual
Box Contents
-
1 x Wireless Charger
-
1 x Suction Cup Mount
-
1 x Air Vent Mount
-
1 x USB-C Power Cable
Product Diagram
Installation
Suction Cup Mount
-
Unscrew the adjusta blemounting ring knob from the phone cradle. Place it over the end of the suction cup mount.
-
Attach the phone cradle to the suction cup mount and tighten the adjustable mounting ring knob so the cradle and suction cup mount are secured tightly.
-
Peel the plastic from the bottom of the suction cup mount and place it on the windscreen of your car or dashboard.
Air Vent Mount
-
Screw the adjustable vent mount clockwise to loosen the adjustment and the hook will slowly come out.
-
Place the hook and latch it on to your air vent. Screw the adjustment anti clockwise to tighten the adjustment and fix the mount securely to your air vent.
-
Unscrew the adjustable mounting ring knob from the phone cradle. Place it over the end of the air vent mount and tighten the adjustable mounting ring knob securely.
Power
- Insert the USB power cable in a 5VDC/9VDC USB car charger (not included).
- Insert the USB-C plug in to the USB power socket of the phone cradle.
- The LED status indicator will turn green once it has been powered on.
Note: It is suggested to use a Qualcomm® Quick Charge™ 3.0 USB car charger for fast charging. Please check to see if your device supports quick charge otherwise it will charge at 5W.
Operation
Charging
-
Press the lock/release button to open the phone clamps.
-
Slide down the adjustable holder located at the bottom of the cradle and slide your smart phone into the cradle.
-
The LED status indicator will turn blue once charging has started.
Note: You may need to change the position of the adjustable holder at the bottom of the cradle. The wireless charging pads are in a different location depending on the type of smartphone.
Troubleshooting
Problem: | Solution: |
---|---|
Will not charge device | Ensure your smartphone supports Qi wireless charging |
Ensure the mobile device is placed on the charging pad correctly and adjust
the adjustable foot holder accordingly
Restart your mobile device and wireless charger
Will not charge device| Take off your phone case as it may be interfering with
the wireless charger
Will not power on| Ensure the USB cable is connected properly to a suitable
USB car charger
Safety
- Do not place any metal objects, magnets, magnetic stripe cards or metal phone cases between the mobile device and the charger as it may not work properly.
- Keep the wireless charger at least 20cm away from any implantable medical devices such as a pacemakers or cochlear, etc. to avoid interference with the medical device.
- Do not open the case of the wireless charger to avoid damage and injury.
- Keep the wireless charger away from high temperatures as it may cause damage to the speaker and battery.
- Do not expose the wireless charger to water, moisture or liquids to prevent the unit from damage.
Specifications
-
Input: 5VDC @ 2A, 9VDC @ 1.7A
Voltage Output: 5VDC, 9VDC
Current Output: 5V @ 1A (5W)- 9V @ 0.8A (7.5W)
- 9V @ 1.1A (10W)
- 9V @ 1.66A 15W)
-
Output Power: 5W/7.5W/10W/15W
-
Charging Efficiency: 73% (Max)
-
Charging Distance: ≤7mm
-
Battery: 3.7V Li-ion, 60mA
-
Battery Standby Time: Up to 30 Days
-
Dimensions: 119(H) x 75(W) x 34(D)mm
Distributed by: Electus Distribution Pty. Ltd. 46 Eastern Creek Drive,
Eastern Creek NSW 2766 Australia
Ph: 1300 738 555
Int’l: +61 2 8832 3200
Fax: 1300 738 500
www.electusdistribution.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>