OMNE SLEEP OS1 Black Queen Adjustable Bed Base Owner’s Manual

June 4, 2024
OMNE SLEEP

OMNE SLEEP logo

OS1
OWNER’S MANUAL
Installation & Operation

OMNE SLEEP OS1 Black Queen Adjustable Bed Base

Parts List

All electronics and components that need to be installed are located in boxes under the foundation or attached to the frame. Before discarding the packing materials, ensure that all the parts are accounted for.

OMNE SLEEP OS1 Black Queen Adjustable Bed Base - 1

Unpacking Your Base

OMNE SLEEP OS1 Black Queen Adjustable Bed Base - 2

Unpacking Your Base

  1. Open the carton box. Lay out the adjustable base flat on the ground
  2. Open all the parts boxes and cut the zip ties as shown

OMNE SLEEP OS1 Black Queen Adjustable Bed Base - 3

Attaching Legs To Base

OMNE SLEEP OS1 Black Queen Adjustable Bed Base - 4

Attaching Legs To Base
Locate the box containing 6-bed legs, and tighten the 6 legs as shown.

Insert the cords and retainer Bar

OMNE SLEEP OS1 Black Queen Adjustable Bed Base - 5

Insert the cords and retainer Bar

  1. Please insert the cords properly as shown.
  2. Flip over the base, and insert the retainer bar as shown.

OMNE SLEEP OS1 Black Queen Adjustable Bed Base - 6

Remote Control Instruction

OMNE SLEEP OS1 Black Queen Adjustable Bed Base - 7

TROUBLESHOOTING

  1. The bed does not work:
    a. Check whether cords are connected properly.
    b. Check whether the plug is inserted in properly.
    c. Check whether you use the right power adapter (29V/2A).

  2. The bed stops suddenly or does not respond to the remote:
    a. Overloading: use the bed properly and within the weight limit.
    b. System error due to false operation: cut power, waiting 2 minutes before reconnecting.
    c. Bad connection: check all cords and plug, reconnect.

Safety & Warranty Warnings

READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT
If unable to understand warnings, cautions, and/or instructions, contact the dealer or technical personnel if applicable, before attempting to use the equipment. Otherwise, injury or damage may result.

SAFETY WARNINGS:

  • Do not use the bed outdoors.
  • Do not use a bed near explosives.
  • Using a bed with oxygen administering equipment other than the nasal masked type creates a possible fire hazard.
  • When using nasal or masked type administering equipment, route and secure oxygen or air tubing properly to ensure that tubing does not become entangled or damaged during normal operation of the bed.
  • Use caution when having liquids in or around the bed to ensure no spilling occurs. In case of spillage, stand in a dry, clean area of the floor and unplug the bed immediately. Clean up the spill and allow the area around the bed to dry thoroughly before using the electric controls again. Do not eat or drink hot liquids while operating the bed.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instructions concerning the use of the appliance by a person responsible for their safety.
  • Do not allow children or individuals with disabilities to operate the bed without adult supervision.
  • Do not allow any person or pet under the bed at any time.
  • During bed operation, make sure the body is positioned within the confines of the bed. Do not place extremities over the sides of the bed when operating bed functions.

WARRANTY WARNINGS :
Do not open or tamper with the control box, motors, or remote (with the exception of battery compartments). The warranty will be void if the internal workings of these components are tampered with.

Product Rating:
The motors are not designed to operate continuously for more than [2] minutes in a [18] minutes time period or approximately 10% duty cycle. Attempting to circumvent or exceed this rating will shorten the life expectancy of the foundation and may void the warranty.

Operating Information:

  • After the power foundation assembly is completed, operate the remote control to ensure proper functions.
  • Keep moving parts free of obstruction during bed operation (including sheets, clothing, tubing, wiring, and products using electric power cords).
  • Distribute body weight evenly over the bed surface. Do not place entire weight on head or foot sections of the bed, during repositioning and entering or exiting the bed.

Hospital Use Disclaimer:
This power foundation is designed for residential use only. It is not approved for hospital use and does not comply with hospital standards.

Weight Limits:
This product is not rated to support weights in excess of 650 pounds inclusive of the mattress and bedding. The bed will structurally support this weight, provided it is evenly distributed across the foundation. The power foundation is not designed to support or lift this amount in the head or foot sections alone. Exceeding this weight restriction could damage the bed and/or cause injury and will void the warranty.

WARNING
DO NOT USE THIS BED IF WEIGHT LIMrrATION IS EXCEEDED

RADIO FREQUENCY: 2.4 GHz

FCC COMPLIANCE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To comply with the FCC RF exposure requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirement and void the user’s right to operate the device.

1 Ye ar Parts Only Warr anty

Documents / Resources

| OMNE SLEEP OS1 Black Queen Adjustable Bed Base [pdf] Owner's Manual
OS1, Black Queen Adjustable Bed Base, Queen Adjustable Bed Base, Adjustable Bed Base, OS1, Bed Base
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals