ACURA Wireless Phone Charger Instructions
- June 3, 2024
- Acura
Table of Contents
ACURA Wireless Phone Charger
Wireless Charger
To use the wireless charger, the power mode must be in ACCESSORY or ON. Charge any devices compatible with Qi wireless charging on the area indicated by the mark as follows:
- To turn the system on and off, press and hold the (power) button.
- When the system is activated, the green indicator light comes on.
- Place the device you want to charge on the charging area.
- The system will automatically start charging the device, and the amber indicator light will come on.
- Make sure that the device is compatible with the system, and placed with the chargeable side in the center of the charging area.
- When charging is completed, the green indicator light will come on.
- Depending on the device, the amber indicator light will stay on.
When charging does not start
Perform one of the solutions in the following table.
| Indicator | Cause | Solution |
|---|
Green & Amber
|
Blinking simulta- neously
| There is an obstacle(s) between the charging area and the device.| Remove the obstacle(s).
The device is not within the charging area.
| Pick up and reset the device to the center of the charging area where is located.
The temperature of the wireless charger pad increases.
| Temporarily suspend charging the device. Wait for the temperature to drop and attempt to charge the device again.
Amber
|
Blinking
|
The wireless charger is faulty.
| Contact a dealer for repairs.
CAUTION
Metal objects between the charge pad and the device to be charged will get hot and can burn you.
- Always remove foreign objects from the charge pad before charging the device.
- Be sure the surface is clear of dust and other debris before charging.
- Do not spill liquids (i. e. water, drinks, etc.) on the charger and the device.
- Do not use oil, grease, alcohol, benzine or thinner for cleaning the charge pad.
- Do not cover the system with towels, clothing, or other objects while charging etc.
- Avoid spraying aerosols which may come in contact with the charge pad surface.
This system consumes a lot of power. Do not use the system for a long time
when the engine is not running. This may weaken the battery, making it
difficult to start the engine.
When using the wireless charger, check the user’s manual that came with the
compatible device you want to charge.
The wireless charger can support up to 15W, but the charging rate varies based on the device and other conditions.
NOTICE
Do not place any magnetic recording media or precision machines within the charging area while charging. The data on your cards such as credit cards can be lost because of the magnetic effect. Also, precision machines such as watches may malfunction.
In the following cases, charging may stop or not start:
- The device is already fully charged.
- The temperature of the device is extremely high while charging.
- You are at a place that emits strong electromagnetic waves or noises such as TV station, electric power plant, or gas station.
- The device has a cover, case or accessories which are not compatible with wireless charging.
A device may not charge if the size or shape of its chargeable side is not appropriate for use with the charging area. Not all devices are compatible with the system. During the charging phase, it is normal for the charging area and device to heat up.
Charging may be briefly interrupted when:
- All the doors or the tailgate are closed
- to avoid interference with the proper functioning of the keyless access system.
- The position of the device is altered.
Do not charge more than one device at a time on a charging area. If the device becomes too hot and its battery protection function activates, it may charge extremely slowly or no longer charge. The temperature at which the battery protection function activates depends on the device.
RF Radiation Exposure Statement:
This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
In order to use safely:
- Remove any metal objects from the charge pad before charging a device.
- Do not open the charger case.
- Do not use the charger if it malfunctions. Contact your dealer. If the charger interferes with radio communications, attempt to correct the interference:
- Press and hold the switch on the charger for a few seconds to turn off the charger.
appears on the audio/information screen when the device is being charged by the wireless charger.