TELAMI B08B5HCSY9 Directors Chair Instruction Manual
- July 31, 2024
- TELAMI
Table of Contents
TELAMI B08B5HCSY9 Directors Chair
Specifications
- Product: Director’s Chair
- Origin: Italy
- Materials: Solid beech wood, top-quality fabrics
- Usage: Indoor and outdoor
- Assembly: Handcrafted with galvanized hardware
Product Usage Instructions:
Assembling the Chair
- Take the seat (square textile) and the rods. Insert the rods into the appropriate fabric hems.
- Place the chair on the floor with the back facing up. Slide the seat into the grooves, with the seams facing the illustrated side.
- Turn the backrest poles forward and insert the textile with the leather label on top.
- Put the chair in a standing position and press both metal hinges with your foot until they snap.
Maintenance and Care
Most fabrics are suitable for outdoor use. For fabric specifications,
composition, and washing instructions, refer to our website. For liquid
spills, immediately absorb with a dry cloth. Avoid prolonged sun exposure for
cotton fabrics. Protect the wooden frame from direct sunlight and rain. Clean
with specific non-abrasive wood products.
Frequently Asked Questions (FAQ):
Q: Can the Director’s Chair be left outdoors?
A: While the chair is suitable for outdoor use, it is recommended to store it
in a protected and dry place overnight and avoid direct rain exposure.
Q: How should I clean spills on the fabric?
A: Immediately absorb liquid spills with a dry cloth. Refer to the fabric
specifications for more detailed cleaning instructions.
Director’s Chair
Assembly, use and maintenance instructions
Our legendary Director’s Chair is an artisanal product handcrafted in Italy,
made with top quality raw materials sourced in Italy, suitable for indoor and
outdoor use.
To create it, we have chosen the best quality and strongest fabrics. The solid
beech wood is of the highest quality. It is crafted in our joinery according
to the highest quality standards and assembled with sturdy and durable
galvanized hardware.
Enjoy your relax!
Assembling the chair
-
Take the seat (square textile) and the rods.
Insert the rods into the appropriate fabric hems. -
Place the chair on the floor with the back facing up. Don’t open it completely. Slide the seat into the grooves, with the seams facing the illustrated side.
-
Leaving the chair in the same position, turn the backrest poles forward and insert the textile with the leather label on top.
-
Put the chair in standing position and press both metal hinges with your foot until they snap. If you close the chair for storing, remember to repeat this step every time you open it again.
Maintenance and care
- The majority of our fabrics are suitable for outdoor use, while others are designed to give you maximum comfort in indoor use.
- To find out the specifications of your fabric, its composition and washing instructions, see the corresponding product sheet on our website telami.it
- In case of liquid spills, the textile can be cleaned by immediately absorbing with a dry cloth.
- Cotton or partially cotton fabric tends to discolor when directly and continuously exposed to sunlight. Avoid prolonged sun exposure of canvases containing cotton.
- The wooden frame is finished with coatings that protect it from sunlight. Do not leave the chair in the weather, store it in a protected and dry place overnight.
- Do not expose the product to direct rain.
- For cleaning, only use specific, non-abrasive products for wood.
- Do not stand on the chair and only place it on even, flat surfaces.