T nB HTAG Bluetooth headphone black Instruction Manual

: June 5, 2024
: T-nB

Table of Contents

T’nB HTAG Bluetooth headphone black
IMPORTANT SAFETY INSTRUCTIONS
RECHARGING YOUR HEADPHONE
TURNING ON YOUR HEADPHONE
PAIRING
TURNING OFF YOUR HEADPHONE
FUNCTIONALITIES
PASSIVE MODE
SPECIFICATION:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

T’nB HTAG Bluetooth headphone black

T'nB HTAG Bluetooth headphone black feature

Congratulations on your purchase and thank you for the trust you have placed in T’nB. Our products comply with the all relevant regulations and standards. Before using this equipment, we recommend that you read the instructions and safety instructions carefully and keep this manual for future reference.

IMPORTANT SAFETY INSTRUCTIONS

No guarantee will apply in case of misuse.
T’nB accepts no liability if the safety instructions are not respected.
Handle the device With care.
The power supply of your device must match the initially specified characteristics
The socket of the electrical equipment must be located near the said equipment and easy to get to.
Keep the device away from flammable objects, explosive substances or dangerous objects.
Use and store your device in an environment where the temperature is between 0°C and 40°C.
Store your device out of the reach of children.
This device is not designed to be used by persons (including children) whose physical, sensory or mental capacities are reduced, or persons without experience or knowledge, except if they are Supervised or receive prior instruction on using the device by a person in charge of their safety.
Do not disassemble your device and do not attempt to repair or modify it yourself.
Stop using your device if it has been hit or damaged.
To avoid the risk of electric shock, disconnect your device from the mains and from any other device before cleaning it or when not in use.
Only use the supplied accessories and connectors. The use of any other type of accessory not intended for this purpose may irremediably damage your device.
Make sure the appliance is switched off and cold before cleaning. Do not use any product or ubricant which may damage the appliance TnB accepts no liability for damage caused by misuse of the product or by use with an incompatible electrical device.
Unless otherwise stated, never use your device in rain, in damp places or near a water source.
Unless otherwise stated, this product is for indoor use only.
Do not leave wireless products near credit cards or other data storage devices.
Avoid using your wireless devices near sources ofinterference, such as power supply cables, microwave ovens, fluorescent lamps, wireless video cameras and wireless domestic telephones.
To improve the quality and the strength of the wireless signal, reduce the number of devices operating on the same wireless frequency.
Switch off the helmet/earphones after use and tidy it/them away in a suitable place to avoid damage, Scratches and warping.
Do not set the volume to a high level before switching on the product. Slowly increase the volume to avoid damaged cause by a high volume.
Do not use the helmet/earphones in a dangerous place or in a location where you cannot hear outdoor sounds.

RECHARGING YOUR HEADPHONE

To recharge your headphone, use the Type-C cable supplied with it. Connect the cable to the case and then connect the other end to a USB port: computer, USB charger, etc. The indicator light will be red while charging. Once fully charged, the indicator light will be blue. Charge time is about 2.5 hours on an empty battery.

TURNING ON YOUR HEADPHONE

To switch on your headphone, press and hold the MFB (multifunction button) about 3.5 seconds. A voice will let you know by saying: “Power on’, then the headphone will enters into paring mode automatically.

PAIRING

Ensure that your phone or Bluetooth device is switched on.
Switch on the headphone. It will enters into pairing mode automatically, and a blue and red light indicator will starts to flash alternately quickly.
Activate the Bluetooth feature on your device, and select “TNB IMMERSIVE” The bluetooth is connected once there is a ” connected” prompt tone.
When successfully connected, a blue light will be on continuously.
Once connected, everytime the headphone will be on, it will automatically be paired to your device.

TURNING OFF YOUR HEADPHONE

To switch off your headphone, press and hold the MFB about 3.5 seconds, a voice will let you know by saying: ” Power off>.

FUNCTIONALITIES

Play/Pause: Press the MFB button once. Press once again to restart the music.
Adjust the volume: short press on the«+» button to increase the volume/on the « – » button to reduce the volume.
Changing tracks: Press and hold the « +» button to select the next song/ press and hold the «-» button to select the previous song.
ANC mode: Hold the ANC button for 1 second. Green LED light will turn on. To turn it off, holdthe ANC button for 1 second again. The green LED will turn off.
Answering /Ending a call: When you receive a call, the music will automatically turn off. Press the MFB button once on the headphone to answer, do the same to hang up. Once you hang up, your music will automatically start playing again.
Reject a call: Press the MFB button for 2 seconds.
Siri: Say “Hi, Siri” or press 2 times the MFB button to wake up Siri.

PASSIVE MODE

You can use your headphone as a wired one to save batteries. Simply connect one end of the 3.5-3.5 audio cable to your headphone, and one end to your device. Inserting an audio cable disable the wireless functionality.