marta MT-1428 Hair Dryer User Manual
- June 11, 2024
- MARTA
Table of Contents
MT-1428 Hair Dryer
User Manual
MT-1428 Hair Dryer
Description
- Concentrator
- Housing
- Air inlet
- Handle
- Speed control switch
- Temperature control switch
- Hanging loop
Real set of the appliance could be different from listed in the User manual. Check once buy.
CAUTION
Read the user manual carefully before using the appliance and save it for future reference.
- Before first use, check the appliance specification and power supply in your network.
- The appliance is not intended for industrial use.
- For indoor use only. Use only for domestic purpose according to the user manual.
- Do not use with damaged cord, plug or another injury.
- Keep the power cord away from sharp edges and hot surfaces.
- Do not pull the cord. Always take the plug. Do not reel the cord around the appliance housing.
- Never attempt to repair the appliance by yourself. If you meet problems, please contact customer service center.
- Using accessories or replacement parts which are not recommended or sold by the manufacturer may cause damage to the appliance.
- Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
- To avoid electric shock and fire, do not immerse the appliance in water or other liquids. If that occurs, immediately unplug the appliance and contact service center for inspection.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a responsible for their safety person.
- If the appliance overheats it switches off automatically. Then set the switch into position 0, unplug the appliance and wait until the appliance is completely cool down. Make sure that there are no hair, dust and other objects in air inlets.
- Blocked air inlets could cause appliance overheating. Please control that hair, dust and down don’t get into the air inlets.
- Don’t use the appliance in a bathroom and near water source to avoid electric shock.
- While the appliance is operating be careful with the concentrator – it could get hot. Don’t touch it.
USING THE APPLIANCE
- Unwind power cord.
- Set the concentrator on hair dryer.
- Plug the appliance in.
SPEED CONTROL
- The appliance is equipped with speed control to adjust power of airflow.
– 0 – off
– | – medium airflow power for soft drying and styling
– || – high airflow power for fast drying
TEMPERATURE CONTROL
- The appliance is equipped with temperature control switch with next positions:
– 0 – cool airflow
– | – warm airflow
– || – hot airflow
CONCENTRATOR
- The concentrator is used for focused airflow and allows you each hair lock drying and styling.
TOURMALINE IONIC
- Tourmaline coating creates flow of negative ions and antistatic effect for easier hair comb-out, makes your hair shiny and healthy.
CLEANING AND MAINTENANCE
- Unplug the appliance before cleaning. Let the appliance cool down.
- Clean the appliance housing with wet cloth.
- Take the concentrator off and rinse it in warm soapy water.
- Do not use chemical and abrasive cleaners for cleaning.
- Wipe the housing and the concetrator with smooth dry cloth.
STORAGE
- Let the appliance cool down. Make sure that there is no water on the appliance surface.
- Don’t reel the cord on the appliance housing. That may cause cord damage.
- Store the appliance in dry cool place.
SPECIFICATION
Model| Power supply| Max Power| Net weight / Gross weight| Package size (L х
W х H)
---|---|---|---|---
MT-1428| 230 V ~ 50 Hz| 1800 W| 0,39 kg / 0,58 kg| 255 mm x 105 mm x 278 mm
WARRANTY DOES NOT COVER CONSUMABLES (filters, ceramic and non-stick
coating, rubber seals, etc.)
Production date is available in the serial number located on the
identification sticker on the gift box and/or on sticker on the device. The
serial number consists of 13 characters, the 4th and 5th characters indicate
the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture,
warranty and technical characteristics of the model without notice. Please
check when purchasing device.
Producer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street, Ningbo, China
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>