AGFAPHOTO 100Pro Powercube Instruction Manual

AGFAPHOTO 100Pro Powercube

SET INCLUDES

INTRODUCTION

Congratulations on purchasing the “AgfaPhoto POWERCUBE 100Pro” mobile socket. With 88.8 Wh of stored energy, you can supply electronic devices with power anytime and anywhere, be it when camping, at an outdoor photo shoot, in your motorhome, in the event of an emergency or a power failure.

Note the following points while reading through this instruction manual:

• This manual was prepared with care and to the best of our knowledge. Contact us should you have any questions relating to the product.
• This manual may not be copied or duplicated, except for personal use.

Disclaimer

• Our company cannot be held liable for damages caused by fire, earthquake, use by a third party, other accidents, intentional misconduct on the part of the customer, abuse or other abnormal conditions.
• Do not repair any damage to the AC plug or power supply on your own.
• The warranty covers all terms and conditions of the warranty. Contents that are not specified in the warranty terms and conditions are beyond our responsibility.
• Our company assumes no liability for damages caused by incorrect use or non-compliance with this instruction manual.
• This instruction manual, as well as other language versions can be downloaded as a PDF file on our website: www.portable-power-stations.com.
• Intended use : The AgfaPhoto POWERCUBE 100Pro unit is intended as a power supply for electronic devices with a maximum power consumption of 80W continuous, 120W peak. Our product is not suitable to be used with equipment that relates to one‘s own personal safety or which relies heavily on electricity, such as medical devices, equipment for nuclear facilities, the manufacture of air and spacecraft, etc. We therefore assume no liability for accidents involving personal safety, fires or machine failures caused by using our product with the aforementioned devices.

SAFETY INSTRUCTIONS

Observe these instructions to ensure safe usage.

Explanation of symbols

This symbol together with DANGER means| Noncompliance may very likely lead to serious injury or death.
---|---
This symbol together with WARNING means| Noncompliance may lead to serious injury or death.
This symbol together with CAUTION means| Noncompliance may lead to injuries and/or property damage.
This symbol together with ATTENTION means| Noncompliance may damage the unit.

• Serious injuries include blindness, burns, electric shock, fractures, poisoning, etc., which can lead to complications, hospitalization or permanent treatment.
• Injuries include burns, electric shock, etc., which do not lead to hospitalization or permanent treatment.
• Property damage: includes buildings, belongings and pets, etc.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

DANGER

Do NOT disassemble, repair or modify the unit or the battery.
Doing so may result in electric shock, fire, etc.

Do NOT place the unit close to or in a fire or expose it to heat. Keep out of direct sunlight.
Doing so may result in fire or injuries.

Do NOT charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
Doing so may result in electric shock, fire, etc.

Only use the output socket to power external devices. Never connect the output to mains power under any circumstances.
Connecting to the mains may lead to electric shock, injuries or fire.

Do NOT touch the unit or the plug-in points if your hands are wet.
Doing so may result in electric shock.

Do NOT connect any metallic objects to the AC input or output.
Doing so may result in electric shock, fire, etc.

Do NOT rub your eyes if fluid from inside the unit should get in your eyes.
If this should occur, flush eyes with water and seek medical attention immediately.
This can lead to blindness.

Do NOT dispose the unit together with household waste.
Follow the local law to dispose the unit.

Do NOT use any inappropriate power cords.
Doing so may result in electric shock, fire, etc.

Do NOT operate the unit above the specified input voltage.
Doing so may result in electric shock, fire, etc.

Do NOT use the unit if it is not functioning correctly.
Doing so may result in electric shock, fire, damage to the unit, etc.

Do NOT move the unit if it is recharging or in use.
Doing so may result in electric shock, damage to the unit or other injuries.

CAUTION

If rust, peculiar odors, overheating or other abnormal circumstances are observed, stop using the unit immediately and contact the dealer or our customer service center.

The unit complies with all legal requirements for transport of dangerous goods.
The capacity of the lithium battery pack in the unit exceeds 80 Wh.
Based on international standards: If this unit is to be sent by airplane, it must be transported in accordance with IATA standard packaging. IATA instructions and labelling requirements and the relevant declarations must be completed.

Make sure that the unit is properly secured when transporting it in a motor vehicle.
Failure to do so may result in damage to the unit, electric shock, overheating, fire and other accidents.

Only charge and use the unit within an ambient temperature of -10 to 40 °C (14 – 104 °F).
Operating the unit above or below this temperature range may result in overheating or reduced performance.

Switch the unit off immediately if it has accidentally fallen, was dropped or was exposed to vibrations.
To prevent accidents, please contact the dealer or our customer service center to have the unit checked and repaired.

Carefully read the instructions for the electric devices that you intend to connect to your power supply unit.

Make sure that the device you are connecting is switched off before you connect it.
A device starting up suddenly may lead to accidents or injuries.

If the protective function is activated and the output of the device is switched off, disconnect the electric devices from the power output. Switch the unit off in case of non-use/storage in order to prevent electric shock and the battery from discharging unnecessarily, etc.

TRANSPORTATION

1. Carry the unit with both hands
   ATTENTION
   Keep the unit away from other objects when moving.
   ATTENTION
   Take extra care to ensure that the unit is never allowed to fall to the ground.

2. Placing the unit on a stable surface
   ATTENTION
   Place the unit on a stable surface. By doing so, it is easier to read the indicators.

3. Transporting the device.
   DANGER
   The unit should not be subjected to any impact or vibrations. Otherwise there is a risk of fire. Keep the unit‘s original packaging and use it when you need to transport the unit.

GET TO KNOW YOUR AgfaPhoto POWERCUBE 100Pro

Button and connector explanations

A. AC Output On/Off Button
B. AC Indicator
C. Battery-Indicator
D. Power On/Off Button
E. LED Lightpanel On/Off Button
F. Cooling vents
G. Input: 1x 3.5mm DC35135 Input 15~24 V, 1.2 A max.
H. Output #1: 2x USB 5 V, 2.4 A (Total 4.8 A max.)
I. Output #2: 2x USB 5-12 V, 2 A (Total 5 V, 3.4 A, 18 W max.) | Qualcomm QuickCharge™ 3.0
J. Output #3: 1x Type-C 5 V, 3 A / 9 V, 2 A / 12 V, 1,5 A | PD 3.0 (18 W max.)
K. Output #4: 1x 5.5mm DC5521 12-16.8 V, 10 A (13 A max.)
L. Output #5: 1x AC 230 V / 50 Hz 80 W (120 W max.)
M. Ultrabright LED Lightpanel

CHARGING

Before use or storage, plug your AgfaPhoto POWERCUBE 100Pro into the wall until it is fully charged. If the display shows less than 20% capacity, plug it into a power source, like an AC outlet or a solar panel as soon as possible.

  ATTENTION
Only charge the unit when the ambient temperature is between -10 and +40 °C (14 – 104 °F).

WHAT IT CAN POWER

• LED Light (5W) ~17 hrs

• Cellphone (5.5Wh) ~16 recharges

• Camera batteries (7.5 Wh) ~12 recharges

• 12“ Notebook (85 Wh) ~1 recharge

…and many more

BATTERY INDICATOR

The battery indicator shows the total charge remaining in your AgfaPhoto POWERCUBE 100Pro.

NOTE

Charging time may vary depending on the ambient temperature involving the solar charger. End the charging process by switching off the unit and pulling the plug out of the socket.

CHARGING VIA MAINS POWER SUPPLY

Using the included AC Wall Charger, plug the unit into any wall outlet to charge the unit. you will know the unit is charging when the blue LED battery indicators are blinking. The unit is fully charged when all battery indicators stop blinking and remain solid. After the unit is fully charged, please remove the AC wall charger in time.

CHARGING VIA SOLAR PANEL

1. Place your solar panel where it will get as much direct sunlight as possible.
2.  Plug the output of the solar panel into the input of the unit to start charging. you will know the unit is charging when the blue LED battery indicator lights up and flashes.
   The unit is fully charged when all battery indicators stop flashing and remain solid.
   

TECHNICAL SPECIFICATIONS

General informations

Net. Weight| 1.04 kg (2.29 lbs)
Working temperatures| -10°C – +40°C (14°F – 104°F)
Dimensions (LxWxH)| 165 x 80 x 117 mm (6.49 x 3.14 x 4.60 inch)
Certificates| CE, FCC, UN38.3

Battery

Cell type| Lithium-Ion
Output | Capacity| 80W continuous, 120W peak | 88.8 Wh
Lifecycles| >500
Management system| Overcharge Protection, OverDischarge Protection, OverCurrent Protection, OverPower Protection, Short-Circuit Protection

Ports

Input | 1x 3.5mm DC35135| 15~24 V, 1.2 A max.
Output | 2x USB| 5 V, 2.4 A (Total 4.8 A max.)
Output | 2x USB (QC 3.0)| 5-12 V, 2 A (Total 5 V, 3.4 A, 18 W max.)
Output | 1x Type-C (PD 3.0)| 5 V, 3 A / 9 V, 2 A / 12 V, 1.5 A (18 W max.)
Output | 1x 5.5mm DC5521| 12-16.8 V, 10 A (13 A max.)
Output | 1x AC| 230 V / 50 Hz 80 W (120 W max.)

USING THE AgfaPhoto POWERCUBE 100Pro

How to provide power for AC appliances with AgfaPhoto POWERCUBE 100Pro?

Connect the power cable plug of the electrical appliance to the AC outlet of the product, switch on the power button and the unit will start providing power to your appliances.

WARNING
AC outlets, AC voltage and frequencies are different in different countries. Please carefully check whether the product specifications are consistent with the appliance specifications before use.

Limited Appliance Wattage <80W. 

Lamps, Electric Fans, TVs, etc. AC will shutdown when it’s short circuited or power overloaded. Remove the device and the unit will recover from short- circuit or overpower protection in a few seconds. Repress the AC output button to switch on AC output again.

How to provide power for Type-C or USB devices with AgfaPhoto POWERCUBE 100Pro?

Connect the cable of your device to the Type-C or one of the 4 USB port of the AgfaPhoto POWERCUBE 100Pro. you can even use different ports simultaneously.

NOTE
Some smart devices, such as bluetooth headphones and LED lights require a very small input current to charge, which could be less than 150mA. Powercube 100Pro can charge these kind of smart devices without turning on the AC outlet. Press the power button for 3-5 seconds and the USB output ports and the battery indicators will turn on and start charging your USB devices. After your devices are fully charged, please switch off the Powercube 100Pro.

This product supports Qualcomm QuickCharge™ 3.0 output. It supports 5V-12V / 2A max output for smart devices which also support Qualcomm QuickCharge™ 3.0 . The actual output voltage and current depends on the actual smart devices. It can be obtained by consulting the smart device manufacturer

How to provide power for DC 12V appliances (such as head lamp, fans) with AgfaPhoto POWERCUBE 100Pro?

Plug your appliances to the DC output port and press power switch button to gain power.

NOTE
Please make sure whether your DC 12V appliance supports charging with 5.5mm DC header interface (the diameter of the DC Port of the product is 5.5 mm). Otherwise it is unable to connect with the DC output, but you can buy the corresponding adapter and connect your appliance with it.

WARNING
The DC output voltage range is between 12V~16.8V, maximum output current is 10.8A. DC output voltage drops or increase while battery capacity drops or increase due to chemical characteristics of the battery. If your appliance is not built-in input voltage stabilizing function, it may shutdown when input voltage is too low or too high. If your 12V devices can not work due to input voltage is too high, please read the device manual or consult the device manufacturer to get the input voltage range of your device.

Best-use

• When recharging devices with AgfaPhoto POWERCUBE 100Pro, you should take note of the battery indicator.
• If you plug in devices that have a high power requirement, the charge level of AgfaPhoto POWERCUBE 100Pro can drop quickly and you will not be able to extract the entire 88.8Wh of energy.
• On the other hand, if you’re charging devices that draw power more slowly (tablet or smartphone), you will be able to extract close to the full 88.8Wh from AgfaPhoto POWERCUBE 100Pro. If yor’re experiencing shorter times, you can check the device’s power requirement.
• When the AC port is not in use, turn it off to save power.

Appropriate temperature usage

• Charge protection: AgfaPhoto POWERCUBE 100Pro can charge your device when the ambient temperature is between -10 – 40°C. Outside this temperature range, the system automatically stops charging but will restart once the temperature is back inside the acceptable range.
• Discharge protection: AgfaPhoto POWERCUBE 100Pro can power your devices when the ambient temperature is between -10 – 40 °C. Outside this temperature range the system automatically stops charging your device but will restart once the temperature is back inside the acceptable range.

ATTENTION
Make sure that the electronic device you are powering works properly prior to use. The max. power consumption for electronic devices is 80W continuous and 120W peak. Due to the different types of electric devices, it is possible that they may not operate even if their power consumption is less than 80W.

TROUBLESHOOTING

If your devices are not recharging as they should using AgfaPhoto POWERCUBE 100Pro follow these steps:

1. Ensure the device has been switched on and the battery indicator is showing a remaining charge.
2. Check the battery indicator. If it is at 20% or below, recharge your AgfaPhoto POWERCUBE 100Pro.
3.  Verify your device is suitable for use with the AgfaPhoto POWERCUBE 100Pro.
   a. All AgfaPhoto POWERCUBE 100Pro output ports have their own max. power. Check the AgfaPhoto POWERCUBE 100Pro’s technical specifications to ensure your device is compatible.
   b. Some devices with rechargeable batteries, like laptops and tablets, may draw more power when in use. In these cases, power down your device and recharge it.

What should I do if the unit gets wet?

Immediately turn off the unit and wait until you are certain that it is completely dry before turning it back on. If you are unsure about when it is safe to turn it back on, please contact after sales service.

ATTENTION

The unit provides Modified Sine Wave output, and can be compatible to AC electric appliances that work with sinusoidal waveform (power <80W). However, anything that uses an AC motor isn‘t going to work to full capacity on a modified sine wave, such as an electrical fan. It will even make the electric appliance arouse some noise. Appliances like refrigerators, microwaves, and compressors that use AC motors and some delicate medical equipment should use a product with a pure sine wave inverter. This product is only used for emergency, it cannot replace the normal alternating current, for longterm use, please adapts the power station specification required by electrical appliances.

AgfaPhoto POWERCUBE 100Pro is not suitable for use with a device with an electric motor.

STORAGE AND DOWNTIME MAINTENANCE

1. Charging to maximum capacity
   Fully charge the power supply unit prior to long-term storage. Charge the power supply unit at least once every three months and store the power supply unit only in a dry and dust-free environment which is out of reach of children. Suitable storage temperature: -10 to 40°C (14 – 104 °F). Keep out of direct sunlight. Make sure that the unit rests on a stable surface.

2. System shutdown
   If the system shuts down automatically because of lower battery capacity, please recharge it.

3. Cleaning
   Wipe away any dirt using a damp cloth.
   ATTENTION
   Gasoline, thinner, kerosene, petroleum, etc. have the characteristics of solvents. Do not use.

4. Failure
   Failure to maintain your AgfaPhoto POWERCUBE 100Pro by following these steps can result in battery damage which will void the product warranty.

SERVICE LIFE OF LITHIUM ION BATTERIES

Charge, supply current between -10 and 40°C (14 – 104 °F). Store between -10 and 45°C (14 – 113 °F). Using the battery at temperatures outside the lower and upper limits reduces the battery‘s running time.

Do not connect a continuous load of more than 80 W.
The unit‘s output stops automatically in case of overloading, since it reduces the running time of the battery.

Do not continue to charge the battery after it has charged completely.
Pay attention to the indicated capacity. Do not charge the battery once it has been fully charged or the charging process has been concluded. Otherwise the service life of the lithium battery may be reduced.

Switch off the unit if it is not being used.
Unnecessary power consumption also reduces the running time of the lithium battery.

Fully charge the battery prior to placing it in storage.
Fully charge the power supply unit prior to lengthy periods of non-use for storage and recharge the unit at least once a year. After prolonged storage, it may be necessary to charge and discharge the battery several times in order to reach full capacity.

DISPOSAL AND RECYCLING

Lithium ion battery
As soon as the end of the battery‘s service life is reached, the entire lithium ion battery can be recycled. Do not open or disassemble the unit.

Electric device
Old electric devices may not be disposed together with normal household waste. According to the directive 2012/19/EU, the device must be disposed of in a controlled manner at the end of its service life. The recyclable materials contained in the unit shall be sent to recycling to reduce the burden on the environment.

This unit contains lithium ion batteries. These are hazardous materials and are subject to specific transport and handling regulations. Lithium ion batteries may ignite or explode if handled incorrectly.
For the safe disposal of the unit, contact a collection point or your local municipality for more information and indicate that the unit contains lithium batteries.

Package
The product package consists of recyclable materials. Dispose of these in an environmentally friendly manner and sort the materials in the provided collection systems.

REPAIR TERMS AND CONDITIONS

1. In the case of device failure which can be attributed to poor workmanship, please take the original sales receipt with purchase date (invoice, etc.) to the retail store. In case of normal use, the power supply unit will be repaired or replaced free of charge within the two year warranty period. In addition to that, the customer must bear any shipping charges that may occur.
2. Note that we do not assume any liability for consequential damages (foreseeable damages, psychological damages, etc.).

CUSTOMER SERVICE

Contact distributor for technical support/customer service

EUROPE [GBT GmbH]

An Gut Nazareth 18A 52353 Düren Germany| **** Telephone:
+49 (0) 2421 / 20 85 60| E-Mail: info@gbt-international.com

FREQUENTLY ASKED QUESTIONS (FAQ)

1. What type of battery is in my AgfaPhoto POWERCUBE 100Pro?****

AgfaPhoto POWERCUBE 100Pro contains a 88.8Wh lithium ion battery pack. Lithium ion batteries are much smaller and lighter than normal lead-acid batteries and also can be cycled many more times.

2. How do I know if my AgfaPhoto POWERCUBE 100Pro is charged?****

To check the charge level of your AgfaPhoto POWERCUBE 100Pro, refer to the battery indicator. The number of bars you see indicates the remaining power. AgfaPhoto POWERCUBE 100Pro can be used until it is empty but we recommend to recharge when the level is at one bar.

3. Can I charge the AgfaPhoto POWERCUBE 100Pro while supplying power at the same time?****

Yes. All outputs support simultaneous charging and discharging. Please note, however, that this only makes sense with a remaining battery capacity of more than 10%. Please also be aware, that if the battery voltage is less than 13V, the inverter will shut down due to battery cell protection.

4. Can I take my AgfaPhoto POWERCUBE 100Pro on a plane?****

Yes, it is possible to carry the AgfaPhoto POWERCUBE 100Pro in your hand luggage. But please always check the individual restrictions of your airline and your country. However, keeping the AgfaPhoto POWERCUBE 100Pro in the checked baggage is not permitted for safety reasons as it contains lithium ion batteries.

References

• It's Uptime | International® Trucks
• Die Produktvielfalt von AgfaPhoto: Kameras, Speicher, Zubehör ...
• GBT GmbH | Willkommen bei GBT International
• AgfaPhoto Powerstations und Solarpanels für unterwegs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>