LEXIBOOK RL998 Sunrise Color Alarm Clock Instruction Manual

LEXIBOOK RL998 Sunrise Color Alarm Clock Instruction

Product Information

Sunrise Color Alarm Clock (RL998) The Sunrise Color Alarm Clock is a multifunctional clock that can be used as an alarm clock, radio, and light panel. It comes with a micro USB cable, power adapter, and instruction manual. The clock operates on DC 5.0V 1.0A power and can also function with 2 x AAA/LR03 1.5V batteries (not included) as a backup in case of a power outage. The clock has a snooze button, and volume level control, and can display time in 12H or 24H format. The screen brightness can be adjusted or turned off.

The clock also has a radio function that can tune into frequencies ranging from 87.5MHz to 108MHz and an antenna for better reception. The light panel feature is not available when the clock operates on batteries.

Product Usage Instructions

Unpacking and Set Up

1. Ensure that the package includes the Sunrise Color Alarm Clock, power adapter, micro USB cable, and instruction manual.
2. Insert one end of the micro USB cable into the micro USB port of the alarm clock and connect the other end to the DC 5V power adapter (included).
3. Plug the power adapter to a power outlet.

Note: Malfunction or loss of memory may be caused by strong frequency interference or electrostatic discharge. Should any abnormal function occur, unplug the unit from the mains socket and plug it back in.

Backup Batteries: To install backup batteries, open the battery compartment by pressing and sliding down the cover. Install 2 x AAA/LR03 1.5V batteries observing the polarity markings inside the battery compartment. Close the battery compartment by replacing the cover. Note that when the clock operates on batteries, all functions are available except lighting features. The time display will also turn off after a few seconds to save energy. Press any button to switch it on.

Time and Alarm Set Up

1. Once the device is connected to power, the time starts blinking on the screen.
2. Press the up or down button to adjust the hours and press the confirm button. Press the up or down button to adjust the minutes and press the confirm button. The numbers will stop blinking after 10 seconds without any operation. To resume the time setting mode, press any button.
3. On the back of the alarm clock, press the 12H/24H button to switch the time to 12H or 24H format. In 12H format, AM or PM will appear on screen.
4. On the back of the alarm clock, press the brightness button to select your time display brightness or turn it off.
5. To activate or deactivate the alarm, press the alarm button. The alarm time will be displayed shortly when it is activated. Press and hold the alarm button to set the alarm time. The hours will start blinking. Press the up or down button to adjust the hours and press the confirm button. Press the up or down button to adjust the minutes and press the confirm button.

Note: If any abnormal function occurs, unplug the unit from the mains socket and plug it back in.
Radio Function: To use the radio function, select a frequency between 87.5MHz to 108MHz using the up or down button and adjust the volume level using the volume button.
Light Panel Feature: To use the light panel feature, press the light panel button. Press the up or down button to adjust the brightness level or turn it off.
Maintenance and Warranty: For maintenance and warranty information, visit www.decotech-lights.com

UNPACKING YOUR DEVICE

When unpacking, ensure that the following elements are included:

• 1 x Sunrise Colour Alarm Clock
• 1 x Power adapter
• 1 x micro USB cable
• 1 x Instruction manual

PRODUCT DESCRIPTION

SET UP

Your alarm clock operates on DC 5.0V 1.0A power.

1. Insert one end of the micro USB cable into the micro USB port of the alarm clock. Connect the other end to the DC 5V power adapter (included).
2. Plug the power adapter to a power outlet.

WARNING: Malfunction or loss of memory may be caused by strong frequency interference or electrostatic discharge. Should any abnormal function occur, unplug the unit from the mains socket and plug it back in

Backup batteries

Your alarm clock can also operate with 2 x AAA/LR03 1.5V batteries (not included), which will save and retain all your settings in the event of a power outage.
To install the batteries:

1. Open the battery compartment by pressing and sliding down the cover.
2. Install 2 x AAA/LR03 1.5V batteries observing the polarity markings inside the battery compartment.
3. Close the battery compartment by replacing the cover.

Note: When the device operates on batteries, all functions are available except lighting features. The time display will also turn off after a few seconds to save energy. Press any button to switch it on.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended are to be used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the product. The supply terminals are not to be short-circuited. Do not throw batteries into a fire. Remove the batteries if you are not going to use the product for a long period of time. Batteries shall not be exposed to excessive heat such as sunshine, fire, or the like.
WARNING: Malfunction or loss of memory may be caused by strong frequency interference or electrostatic discharge. Should any abnormal function occur, remove the batteries and insert them again.

TIME AND ALARM SETUP

Time setting

• Once the device is connected to power, the time starts blinking on the screen.
• Press to adjust the hours and press to confirm.
• Press to adjust the minutes and press to confirm.
• Note: After 10 seconds without any operation, the numbers will stop blinking. To resume the time setting mode, press .

12H / 24H format

• On the back of the alarm clock, press to switch the time to 12H or 24H format.
• In 12H format, AM or PM will appear on the screen.

Screen brightness

• On the back of the alarm clock, press to select your time display brightness or turn it off.

Alarm setting

1. Press to activate or deactivate the alarm . will be displayed on the screen accordingly. When the alarm is activated, the alarm time will be displayed shortly.
2. Press and hold to set the alarm time. The hours will start blinking.
3. Press to adjust the hours and press to confirm.
   • Press to adjust the minutes and press to confirm.
   • Note: If the hours or minutes stop blinking press again to resume the setup.
4. When the alarm goes off, press any button except to stop the alarm.

Alarm sound selection

• On the back of your device, press to select the alarm sound and press + or – to switch sounds among 6 nature sounds. You can also choose the radio alarm (7). If sound 7 is selected, the last played radio station will be automatically set as the alarm sound.

Volume level

• On the back of your device, press repeatedly to select the volume level on a scale of 1 to 15.

Snooze function

• Once the alarm rings, press to repeat the alarm after 5 minutes. The alarm will repeat every time you press the snooze button.

RADIO SET UP

• Before using the radio function for the first time, the alarm clock must scan the available radio stations on the frequency range 88-108MHz. Press and hold for 3 seconds to start scanning and search for active channels. Once channels are located, they will be saved as P01, P02, up to P40.
• After auto scan has completed and channels saved, press to turn the radio on/off.
• Press to navigate between the saved stations and select your desired station.

LIGHT OPTIONS SET UP

Sunrise light simulation

• The sunrise light simulation helps you start the day relaxed by simulating the morning sunlight. It wakes you in a natural way by increasing gradually the light intensity for around 30 minutes as your chosen wake-up time gets closer.
• The nature sound or radio will also be played for 2 minutes at the alarm time.
• When the sunrise light simulation is on, press and hold to switch it off.

Sunset light simulation

• The sunset light simulation helps you end the day peacefully by simulating the evening sunlight. It naturally brings you to sleep with a light that decreases gradually for around 30 minutes as your chosen sleeping time gets closer.

1. Press to activate or deactivate the sunset simulation. will be displayed on the screen accordingly.
2. Press and hold to set the sunset time. When the hours start blinking use to adjust the hours and press to confirm.
3. Use to adjust the minutes and press to confirm.
4. When the sunset light simulation is on, press and hold to switch it off.

Bedside light

Your alarm clock can operate as a cozy bedside lamp with adjustable color and intensity.

1. Press once to switch on the light.
2. Use to adjust the brightness level (1 to 10).
3. Press again to select the light color. Then press to choose between green, red, blue, purple, orange, and indigo.
4. Press a third time to switch off the light.

SPECIFICATIONS

• AC/DC Adaptor Input 100-240V ~ 50/60Hz 0.3A; Output 5.0V 1.0A
• Average active efficiency 74,13%
• Efficiency at low load N/A
• No load condition power consumption 0.05W
• Model GQ06-050100-CG
• Wattage: 5W
• Lumen: 70lm
• FM Frequency band: 87.5 – 108MHz
• Transmission power N/A

SAFETY INSTRUCTIONS

PLEASE READ BEFORE OPERATING THIS EQUIPMENT.

Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool. No objects such as vases should be placed on the unit.

6. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. It may damage the screen. Use a dry cloth for cleaning only

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

8. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus; and/or the apparatus has been exposed to rain or moisture and does not operate normally, or has been dropped.

13. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

14. Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. Use only power source as indicated.

15. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.

16. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17.  Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

18. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

19. The socket-outlet shall be installed near the equipment and must be easily accessible.

20. The AC/DC adaptor should not be obstructed OR should be easily accessed during intended use.

21. To completely disconnect the power input, the AC/DC adaptor shall be disconnected from the mains, as the
    disconnecting part is the AC/DC adaptor. 22. The apparatus and AC/DC adaptor shall not be exposed to dripping or splashing and no objects filled with liquids , such as vases, shall be placed near them.

22. At full power, listening to a music player for prolonged periods can damage the user’s hearing.

23. Keep a minimum distance around the device for sufficient ventilation;

24. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.;

25. No naked flame sources, such as lighted candles, should be placed on the apparatus;

26. The use of apparatus in tropical and/or moderate climates.

27. Attention should be drawn to the environment aspects of battery disposal.

SIMPLIFIED EU DECLARATION OF CONFORMITY

• Lexibook® S.A.
• 6 avenue des Andes, Bâtiment 11 91940 Les Ulis – France
• Kind of product: Sunrise Color Alarm Clock Type designation: RL998
• Hereby, Lexibook Limited declares that the radio equipment type RL998 is in compliance with Directive 2014/53/EU and Radio Equipment Regulation 2017.
• The full text of the EU declaration of conformity is available at the following internet address: http://www.lexibook.com/doc/rl998/rl998_2.pdf
• Yiu Wai Man
• Product Development Manager
• Hong Kong

MAINTENANCE

To prevent fire or shock hazard, disconnect your unit from the power source when cleaning. The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use a soft, clean cloth moistened with plain, lukewarm water to clean the exterior of the unit. Use caution when cleaning and wiping the plastic parts.

WARRANTY

This product is covered by our 2-year warranty. For any claim under the warranty or after sale service, please contact your distributor and present a valid proof of purchase. Our warranty covers any manufacturing material and workmanship defect, with the exception of any deterioration arising from the non-observance of the instruction manual or from any careless action implemented on this item (such as dismantling, exposition to heat and humidity, etc.). It is recommended to keep the packaging for any further reference.
NOTE: In a bid to keep improving our services, we could implement modification on the colours and the details of the product shown on the packaging.

• Reference: RL998
• Designed and developed in Europe – Made in China © Lexibook®
• Lexibook S.A.
• 6 avenue des Andes, Bâtiment 11
• 91940 Les Ulis
• Fran
• Lexibook UK
• PO Box 59, SOUTH MOLTON
• EX36 9AU
• UK
• United Kingdom & Ireland
• For after-sales service, please contact us at savcomfr@lexibook.com
• www.decotech-lights.com
• Decorative Lighting purpose only
• Unit not suitable for household room illumination

Environmental Protection

• Unwanted electrical appliances can be recycled and should not be discarded along with regular household waste! Please actively support the conservation of resources and help protect the environment by returning this appliance to a collection centre (if available).

References

• Lexibook.com - Jouets éducatifs, tablettes et multimédia high-tech
• Decotech-lights.com - Marque française de luminaires

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>