Numark NH10 Mixstream Pro Go Standalone Streaming DJ Controller User Guide
- June 11, 2024
- Numark
Table of Contents
Numark NH10 Mixstream Pro Go Standalone Streaming DJ Controller
ENGINEDJ.COM/SUPPORT
For articles, videos, and phone and web support.
GETTING STARTED
Package Contents: Mixstream Pro Go, Power Supply, USB Cable, Getting Started Card, Display Cleaning Cloth, Quickstart Guide, Safety & Warranty Manual
NUMARK.COM/MIXSTREAM-GET-STARTED
- REGISTER YOUR PRODUCT
- DOWNLOAD THE USER GUIDE
- DOWNLOAD INCLUDED SOFTWARE
- WATCH TUTORIAL VIDEOS
CONNECTION DIAGRAM
- Power/Charging
- USB-8 Port: Connect to computer.
- USB-A Ports: Connect to hard drives or Sound Switch DMX interfaces
- Main Outputs (XLR or RCA)
- Mic Input (Front Panel, 1/4″)
- Headphones (Front Panel, 1/4″ and 1/8″)
OPERATION
Engine DJ Standalone OS
Connect USB drive or SD card, or use built-in Wi-Fi to connect to streaming
services or access your library from the cloud.
7″ HD Touchscreen
Multi-gesture support allows you to browse and load tracks and view responsive
waveforms.
Press VIEW to cycle between Performance and Library Views.
Press SHIFT + VIEW to cycle between horizontal and vertical waveforms.
Built-In Battery
The CHARGING LED
next to the POWER button will be solid red when charging and turn off when
fully charged.
Onboard Speakers
With independent
volume control using the SPEAKER LEVEL knob
Smart Scratch
Press to disable or enable Smart Scratch. When enabled, the track’s timeline
continues when you use the platter 8 to scratch the track. When the platter is
released, the track will resume normal playback from where it would have been
if the platter wasn’t moved. When disabled, use the platter to scratch as you
would with a vinyl record.
Press SHIFT and this button to enable jog mode to adjust the track’s speed
with the platter
Built-In Software Effects
FX SELECT buttons
to select an effect.
Move the FX TOGGLE switch away to latch the effect. Hold the switch toward you
to activate it momentarily.
Use the touchscreen to adjust the FX RATE and WET/DRY.
Control Center
Press MENU to open the Control Center, where you can access Source, Wi-Fi, Record, User Profile, and Settings menus.
Engine Lighting
Press LIGHTING to open Engine Lighting view to control compatible light fixtures.
Pad Modes
CUE: Set and jump to hot cue points.
SAVED LOOP: Create and trigger manual loops.
AUTO LOOP: Trigger automatic, time-based loops.
ROLL: Trigger loop rolls as the track continues.
Press each button a second time to access a second bank of values for the four
performance pads.
DOWNLOAD THE FULL USER GUIDE TO LEARN MORE ENGINEDJ.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>