NOVUS NVB-6000WB Wall Mount Bracket User Manual

: June 11, 2024
: Novus

Table of Contents

SAFETY PRECAUTIONS
GENERAL CHARACTERISTICS
INSTALLATION DESCRIPTION
VIEW AND DIMENSIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NOVUS NVB-6000WB Wall Mount Bracket User Manual

SAFETY PRECAUTIONS

WARNING
THE KNOWLEDGE OF THIS MANUAL IS AN INDESPENSIBLE CONDITION OF A PROPER DEVICE OPERATION. YOU ARE KINDLY REQUSTED TO FAMILIRIZE YOURSELF WITH THE MANUAL PRIOR TO INSTALLATION AND FURTHER DEVICE OPERATION.

WARNING!
INSTALLATION AND SERVICING SHOULD ONLY BE DONE BY QUALIFIED SERVICE PERSONNEL AND SHOULD CONFORM TO ALL LOCAL REGULATIONS. PRIOR TO UNDERTAKING ANY ACTION NOT PROVIDED FOR THIS DEVICE NOR DESCRIBED IN THIS MANUAL OR ANY OTHER DOCUMENTS ATTACHED, OR DOESN’T ORIGINATE FROM COMMON USAGE OF A GIVEN DEVICE, CONSULT DEVICE MANUFACTURER UNDER THE RIGOR OF EXCLUDING MANUFACTURER’S RESPONSIBILITY.

TERMS OF SAFETY

We are kindly requesting for keeping this manual for lifespan of the device, in case when referring to manual’s contents would be necessary;
Safety precautions included in this manual should be strictly followed, because they have a direct influence on user’s safety, and also on device’s durability and reliability;
All the actions conducted by the servicemen and users must be accomplished in accordance to the user’s manual;
Usage of additional devices and components not provided nor recommended by the producer is forbidden;
Mounting the device on unstable surface is forbidden. Improperly mounted device may be the cause of fatal accident or be seriously damaged itself. Equipment must be mounted by qualified personnel with proper authorization, in accordance to user’s manual;
Device should be protected from water and objects that may get inside;
User cannot repair or upgrade equipment himself. All maintenance actions and repairs should be done only by the qualified service personnel;

Information

The device, as a part of professional CCTV system used for surveillance and control, is not designed for self installation in households by individuals without technical knowledge.
The manufacturer is not responsible for defects and damages resulted from improper or inconsistent with user’s manual installation of the device in the system.

Information

All data contained in this manual are valid at the moment of printing. Manufacturer reserves the right to adjust and change current guide edition. Furthermore, manufacturer reserves the right to change parameters and design of device without further notice.

GENERAL CHARACTERISTICS

GENERAL CHARACTERISTICS

NVB-6000WB and NVB-6000WB/7043 are a wall mount brackets with cable entry designed for Novus 6000 series dome cameras.
A complete list of compatible cameras can be found in the compatibility table on the page https://www.novuscctv.com

Material	Aluminium
Color	White or grey (NVB-6000WB/7043)
Load capacity	2kg
Dimensions (mm)	74,5x129x155
Weight	0,5kg

INSTALLATION DESCRIPTION

In order to successfully mount a camera, please follow the procedure below:

Unscrew the locking screw (a) and remove the connector (b)
Guide the camera cables through the interior of the bracket (c) and attach the camera to it
Place the connector (b) on the wall and mark the pints for future holes with it
Drill the holes in the marked points and put in them dowels and then screw the connector (b)
Fasten the bracket with the camera to the connector by applying it and pulling it down slightly
Lock the bracket on the connector (b) with the locking screw (a)

WARNIGN!
If there is any possibility of contact of the water with brackets or camera adapters, then brackets and adapter must be thoroughly sealed with sealing compound from outside and inside. AAT SYSTEMY BEZPIECZEŃSTWA sp. z o.o. does not bear any responsibility in case of damage of the camera associated with the penetration of the brackets or adapter of water to the camera or connectors.

WARNING!
If there is any possibility of contact of water with camera wires, they should be carried out so that the water does not run away into the brackets using them.

WARNING!
The declared degree of protection of the camera relates to its housing and does not take into account the possibility of moisture infiltration into the interior of the camera by connecting cables, connectors, adapters or brackets. Connection cables, connectors, adapters or brackets protection through i.e. sealing up is the responsibility of the camera installer. The manufacturer is not liable for any damages camera caused as a result of failing in performing that activity by installer, which also means that camera damaged in that way is not subject to warranty repairs.