mito red light Universal Stand User Manual
- June 11, 2024
- Mito Red Light
Table of Contents
- Universal Stand
- Parts list
- Add castor wheels to base installation
- Post assembly to base installation
- Install telescopic mounting poles
- Vertical stand assembly instructions
- Selection of mounting patterns
- Product specifications
- Horizontal stand assembly instructions
- Screw horizontal metal brackets to panel
- Mito ADAPT Bracket Installation
- Contact us
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
UNIVERSAL STAND
USER MANUAL
Universal Stand
Warning
Severe personal injury and property damage can result from improper
installation or assembly. Read this user manual carefully before beginning.
- If you do not understand the instructions or have any concerns or questions, please contact Mito Red Light (contact details can be found on page 12).
- Do not install or assemble if the product of hardware is damaged or missing, if you require replacement parts, please contact Mito Red Light for assistance.
- This product fits most 21″ x 71″ maximum weight of red light therapy panel is 46 KG or 100 lbs.
- Do not use this product for anything other than the original design.
- This product contains moving parts, please use with caution.
- The manufacturer disclaims any liability that the modifications, improper installation, or installation over the specified weight range. The manufacturer will not be liable for any damages arising out of the use of or inability to use, the product.
- Almagest are a reference only.
Parts list
Add castor wheels to base installation
Post assembly to base installation
Note: Make sure cable management holes are facing the rear of the house
Install telescopic mounting poles
Step 1: Use thumb or finger to depress the right upper pole spring
plunger ball located at the cable window, pull upper pole upward until your
desired height. Twist upper pole towards the plunger holes direction and
engage the spring ball into the plunger hole and set as shown in figure 1.
Step 2: repeat with the left pole.
Vertical stand assembly instructions
Selection of mounting patterns
Step 1: Screw the vertical stand mounting brackets to panel as shown (single panel example)
** See product specific user manuals / video tutorials for bracket install instructions as the brackets vary by Series. https://mitoredlight.com/pages /user-manual
Step 2: Hang panel (with vertical mounting bracket) on the cross bracket.
Product specifications
Horizontal stand assembly instructions
- The base and telescopic mounting installation is same as previous example
- Connect and fixed Horizontal L-form mounting kit ‘A’ with the telescopic mounting, as
Attach poles with 60mm screws to steel L-form plates as shown below
Screw horizontal metal brackets to panel
-
Screw horizontal metal brackets to panel. *note – see product specific user manuals / video tutorials for bracket install instructions as the brackets vary by Series
https://mitoredlight.com/pages/user-manual
-
Fix panel (with horizontal metal bracket attached) with bolts as shown below:
Mito ADAPT Bracket Installation
|
---|---
|
Contact us
We reserve the right to modify or alter instructions. No modification or
alteration without formal notice.
e This mobile stand is used for our Red Light Therapy panels only.
e Please ensure the stand is placed on level floor.
e Please ensure the wheels are locked after installation.
e Children should not use unless approved by physician.
If you have any questions about assembly for this mobile stand, please feel
free to contact us info@mitoredlight.com for
online installation service.
More instructions and videos can be found here:
https://mitoredlight.com/pages/user-manual
You can also call our phone number
Monday – Friday 9am – 5pm MST
1(866) 861- MITO
Mail correspondence can be sent to:
Mito Red Light, Inc
9319 N 94th Way,
Suite 400
Scottsdale, AZ 85258
Learn more about us at www.mitoredlight.com
/mitoredllight
/mitoredllightofficial
/mitoredllight
/mitoredllightofficial