ARROW PR-35063-HPSL Pressure Injectable Three-Lumen PICC with 130 cm Wire Instruction Manual
- June 4, 2024
- Arrow
Table of Contents
ARROW PR-35063-HPSL Pressure Injectable Three-Lumen PICC with 130 cm Wire
Warning:
Read all package insert warnings, precautions, and instructions prior to use. Failure to do so may result in severe patient injury or death. California Prop. 65
WARNING: Cancer and Reproductive Harm.
www.P65Warnings.ca.gov
Not made with natural rubber latex.
Fluid path components are non-pyrogenic.
Contraindications:
The Pressure Injectable PICC is contraindicated wherever there is presence of device related infections or presence of previous or current thrombosis in the intended insertion vessel or catheter pathway. Clinical assessment of patient must be completed to ensure no contraindications exist.
| ****
**Priming Volume***
| Gravity Flow
Rate†
| ****
Pump Flow Rate††
| MAX Pressure Injection
Flow Rate**
---|---|---|---|---
Lumen| (mL)| (mL/hr)| (mL/hr)| (mL/sec)
Distal (17 Ga.)| 0.62| 1195| 6410| 6
Medial (19 Ga.)| 0.42| 297| 2720| not rated
Proximal (19 Ga.)| 0.45| 297| 2830| not rated
- Priming volumes are approximate and are done without accessories.
- Flow rate values are approximate and are determined using deionized water at 100 cm head height.
- Pump flow rates are determined at maximum pump pressure of 10 psig and represent approximate flow capabilities.
- Pressure injection flow rates are determined at the injector pressure setting of 300 psi maximum using media of 11.8 centipoise viscosity, with 152 cm pressure tubing.
Arrow International LLC
Subsidiary of Teleflex Incorporated 3015 Carrington Mill Blvd. Morrisville, NC
27560 USA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>