SONY XS-GTF6939 3 Way Speaker Instructions
- June 11, 2024
- Sony
Table of Contents
SONY XS-GTF6939 3 Way Speaker
Product Information
The XS-GTF6939/XS-GTF1639/XS-GTF1339 are 3-way speakers manufactured by Sony Corporation. The product dimensions for each model are as follows:
- XS-GTF6939: 84 (3 3/8) x 153 (6 1/8) x 118 (4 3/4) mm
- XS-GTF1639: 42 (1 11/16) x 8.4 (11/32) x 5 (7/32) mm
- XS-GTF1339: 45 (1 13/16) x 5.9 (1/4) x 4-57/32 mm
The product is compliant with EU directives and has been imported to the UK by Sony Europe B.V.
Product Usage Instructions
- Choose a location in your car where you want to install the speakers. Ensure that the location is dry and free from dust and debris.
- Remove any old speakers from the location and clean the area if necessary.
- Connect the XS-GTF6939/XS-GTF1639/XS-GTF1339 speakers to your car’s audio system using the appropriate cables.
- Position the speakers in the location you have chosen and secure them in place using the screws provided.
- Test the speakers by playing different types of audio and adjusting the volume to ensure that they are working correctly.
- If you experience any issues with the speakers, refer to the troubleshooting section of the user manual or contact Sony’s customer support for assistance.
- If you need to dispose of the speakers, follow the guidelines for disposal of old electrical and electronic equipment applicable in your country.
Dimensions
- A Reference Point
- B Reference Plane
- C Reference Axis
Notice for customers: the following information is only applicable to
equipment sold in countries applying EU directives
This product has been manufactured by or on behalf of Sony Corporation.
- EU Importer: Sony Europe B.V.
- Inquiries to the EU Importer or related to product compliance in Europe should be sent to the manufacturer’s authorized representative, Sony Belgium, bijkantoor van
- Sony Europe B.V., Da Vincilaan 7-D1, 1930 Zaventem, Belgium.
- Disposal of old electrical & electronic equipment (applicable in the European Union and other countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring that this product is disposed of correctly, you will help to prevent potential negative consequences for the environment and human health, which could be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product.
Precautions
- Do not continuously use the speaker system beyond the peak power handling capacity.
- Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers.
- Please note the following when installing the units; otherwise malfunction and/or deterioration in sound quality may result.
- Do not touch the diaphragms and/or speaker cones by hand or with tools.
- Do not put your fingers through the holes of the frame.
- Do not drop foreign objects in the units.
- Do not place this product close to medical devices.
- This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.
If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting.
Specifications
XS-GTF6939
- Speaker
- Full-range 3-way:
- Woofer 16 cm × 24 cm (6 in × 9 in) cone type
- Tweeter 6.6 cm (2 5/8 in) cone type
- Super Tweeter 1.1 cm (7/16 in) dome type
- Short-term maximum power 1 420 W2
- Rated power 50 W*2
- CTA 2031 RMS Power 60 W
- Rated impedance 4 Ω
- Output sound pressure level 92 dB ± 2 dB (1 W, 1 m)*2
- Effective frequency range 50 Hz – 22,000 Hz*2
- Mass Approx. 1,040 g (2 lb 5 oz) per speaker
- Supplied accessories Parts for installation
XS-GTF1639
- Speaker
- Full-range 3-way:
- Woofer 16 cm (6 1/2 in) cone type
- Tweeter 3.5 cm (1 7/16 in) balanced dome type
- Super Tweeter 0.6 cm (1/4 in) dome type
- Short-term Maximum Power 1 270 W2
- Rated power 40 W*2
- CTA 2031 RMS Power 45 W
- Rated impedance 4 Ω
- Output sound pressure level 90 dB ± 2 dB (1 W, 1 m)*2
- Effective frequency range 55 Hz – 24,000 Hz*2
- Mass Approx. 560 g (1 lb 4 oz) per speaker
- Supplied accessories Parts for installation
XS-GTF1339
- Speaker
- Full-range 3-way:
- Woofer 13 cm (5 1/4 in) cone type
- Tweeter 2.5 cm (1 in) balanced dome type
- Super Tweeter 0.6 cm (1/4 in) dome type
- Short-term Maximum Power1 230 W2
- Rated power 30 W*2
- CTA 2031 RMS Power 35 W
- Rated impedance 4 Ω
- Output sound pressure level 89 dB ± 2 dB (1 W, 1 m)*2
- Effective frequency range 65 Hz – 24,000 Hz*2
- Mass Approx. 480 g (1 lb 1 oz) per speaker
- Supplied accessories Parts for installation
Design and specifications are subject to change without notice.
- “Short-term maximum power” may also be referred to as “Peak Power”.
- Testing Condition: IEC 60268-5 (2003-05)
Mounting
Before mounting
- A depth of at least 73 mm (2 7/8 in) for XS-GTF6939, 42 mm (1 11/16 in) for XS-GTF1639, or 45 mm (1 13/16 in) for XS-GTF1339 is required for flush mounting. Measure the depth of the area where you are to mount the speaker, and ensure that the speaker is not obstructing any other components of the car. Keep the following in mind when choosing a mounting location:
- Make sure that nothing is obstructing around the mounting location of the door (front or rear) or the rear tray where you are to mount the speaker.
- A hole for mounting may already be cut out of the inner panel of the door (front or rear) or the rear tray. In this case, you need to modify the board only.
- If you are to mount this speaker system in the door (front or rear), make sure that the speaker terminals, frame or magnet do not interfere with any inner parts, such as the window mechanism in the door (when you open or close the window), etc.
- Also make sure that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, armrests, door pockets, lamps or seats etc.
- If you are to mount this speaker system in the rear tray, make sure that the speaker terminals, frame or magnet do not touch any inner parts of the car, such as the torsion bar springs (when you open or close the trunk lid), etc.
- Also make sure that the speaker grille does not touch any inner fittings, such as seat belts, headrests, center brake lights, inner covers of the rear wipers, curtains or air purifiers, etc.
Parts list
Mounting from the car interior
REAR TRAY
Mark the 4 bolt holes and make them 3.2 mm (5/32 in) in diameter. Note
- When releasing, push down on the catch firmly and release carefully.
- If excessive force is used, damage to the speaker or terminal cable may result.
DOOR (FRONT/REAR)
(XS-GTF1639/XS-GTF1339)
Mark the 4 bolt holes and make them 3.2 mm (5/32 in) in diameter. Note
- When releasing, push down on the catch firmly and release carefully.
- If excessive force is used, damage to the speaker or terminal cable may result
Flat mounting (installed flush with the surface of the dash)
- This speaker can be made to fit in almost any type of car by removing the mounting tabs.
Use clippers or pliers, etc. to cut or snap two of the mounting tabs off so that it is even with the edge of the speaker frame as illustrated.
Note
After removing the mounting tabs, handle the speaker frame with care, as the
edges may be sharp.
Made in Vietnam
https://www.sony.net/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>