XIAOKOA N-80 2.4G Wireless Headset Microphone User Manual
- June 5, 2024
- XIAOKOA
Table of Contents
XIAOKOA N-80 2.4G Wireless Headset Microphone
Features
The wireless microphone uses 2.4g technology, which features signal stability, plug, and play, long-distance amplification, etc. It is compatible with a variety of loudspeakers, amplifier equipment, outdoor audio equipment, etc
Product Overview
How to set up an amplifier
Headset and receiver connection method
- Turn on the transmitter, the blue light will flash
- Turn on the receiver, After the blue light stops flashing, successfully paired
- Insert the receiver into the MIC port of the amplifier. when used on a PA device with 6_35mm, first plug the receiver into the 6.35 converter and then plug it into the Mic-in jack on the PA device
How to dissemble
STEP:1
STEP:2
Use 2 thumb to press down the Headset holder at the same time
STEP:3
After removing it, the headphone will separate out
STEP:4
When wan to assemble, there will be a joint, and align it by using 2 thumbs to push it up.
Product Parameler
Question & Answer
Introduction
Thank you for purchasing this wireless microphone, please read this user manual carefully
TIPS
The product must be set up on windows first and secondly turning on the recording software
Specification
Warranty
At XIAOKOAwe believe in our products. That’s why we back them all with 1 years warranty and provide friendly, easy-to-reach support. Please feel free to contact us if you encounter any problem that you cannot solve!
Customer Service
PLS CONTACTUSDIRECTLYWITHANY QUESTION OR ISSUE WEARE ALWAYS HERETO ASSIST YOU, THANKS!
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure condition without restriction.