MUSTOOL 16 Lines Laser Level 4D Green Beam Line User Manual
- June 11, 2024
- MUSTOOL
Table of Contents
MUSTOOL 16 Lines Laser Level 4D Green Beam Line
Product Overview
Diagram
- 8 x line chart:
- 4 x 360° horizontal lines
- 4 x 360° vertical lines
- 12 x line chart:
- 4 x 360° horizontal lines
- 4 x 360° vertical lines
- 4 x 360° vertical lines
- 16 x line chart:
- 4 x 360° horizontal lines
- 4 x 360° vertical lines
- 4 x 360° vertical lines
- 4 x 360° horizontal lines
Features and functions
3D laser level can output 3 circle of beam lasers from 3 windows. 4D laser level can output 4 circle of beam lasers from 4 windows. This machine can be used for floor, wall, and any other places you need. It is the most functional laser level you can ever imagine. Features:
- 3 360 ° beam lasers /4 360 ° beam lasers
- Form 6 cross laser lines (12 lines) or 10 cross laser lines(16 lines) •Can be used for floor leveling and wall leveling, with minimum distance to wall at 7mm
- Slope mode
- 3° of self-leveling, alarm function beyond 3 degrees •Well-designed accessories and brackets expand the use of the instrument
User safety
- The laser output marker is located at the output hole
- Do not stare into beam
- Do not open instrument housing. Repairs should be carried out by authorized workshops only.
- This instrument meets the laser radiation safety level standard
Instrument features
Host feature
Operating guide
-
Using of the charger
The rechargeable battery can be charged by inserting the charger into the charging jack. The indicator light is red during charging, and it changes from red to green when the battery is fully charged, note:- The battery cannot be used until the automatic shutdown. If the instrument is flashed, the lithium battery will be replaced immediately and charged. The battery has under-voltage protection.
-
Placement of the instrument
- Can be placed directly on the platform (if the laser line flashes with an alarm means that the instrument has exceeded the self-leveling range, the instrument should be adjusted).
- Attach to the wall through the wall bracket
- Adjust the height of the horizontal lines through the lifting platform
-
Operation panel
- Power on/off
- Tight lock on, instrument turn on.
- Tight lock off, instrument shutdown
Application demonstration: Press A on the remote control to open the horizontal line, press once to open the horizontal line, and press the light horizontal line twice to close the horizontal line. Press the B button on the remote control to turn on the vertical line, press once to- open one, press again to open another one, and press again to close the vertical line.
Self-Test calibration
- Horizontal accuracy self-test
- Find a flat wall, set a platform at a distance of 5 meters from the wall, place the instrument on the platform, and adjust the instrument to make sure it is in a leveling state, and then rotate the V2 glass window face to the wall.
- After the instrument is leveled, mark A at the intersection of the horizontal line and the vertical line, mark a perpendicular line.
- Turn the instrument 90 degrees in turn. After the instrument is leveled, align the cross point with the vertical line and mark it as point B, C, D.
- Measure the biggest distance (h) between the two points of the four points A, B, C, if h>3mm, the accuracy of the instrument is out of tolerance and needs to be repaired.
Specifications
| Technical parameters | Green beam | Blue beam |
|---|---|---|
| Laser diode | 520nm | 515nm |
| Precision | ± 1 mm/5m | ± 1 mm/5m |
| Minimum distance to wall | 7mm | 7mm |
| Operating temperature | -10~40℃ | |
| Working range (radius) | 10m | 10m |
| Automatic leveling angle | ±3° | ±3° |
| Slash function | Yes | Yes |
| Power supply (lithium battery) | 3000(mAh) | 3000(mAh) |
| operating hours | 4h | 4h |
| size | 130x80x120mm(3D) | 130x80x120mm(3D) |
| 130x80x130mm(4D) | 130x80x130mm(4D) |
Maintenance
- Do not disassemble the instrument by yourself. If you have any questions, please contact our marketing department.
- Do not drop or knock the instrument to avoid affecting the accuracy and function of the instrument.
- Excessive discharge will damage the battery, so the instrument should be charged once a month.
- If you want to store the instrument for a long time, remove the battery from the instrument.
- Please charge according to the specified time. Overcharging will shorten the battery life.
- Use a soft cloth and a neutral detergent to clean the surface of the instrument. The leaned instrument should be thoroughly dry.
- The instrument should be stored in a dry, dust-free place.