Rebel SLU0062 Wireless Earbuds Owner’s Manual

Rebel SLU0062 Wireless Earbuds Owner’s Manual

SAFETY INSTRUCTIONS

• Read the instruction manual carefully before first use and keep it for future reference.
• Minimize the volume on your audio device before connecting the earphones in order to avoid hearing damage from sudden exposure to excessive volume. Keep the volume at a reasonable level throughout entire time of using the earphones. To prevent damage to your hearing, do not raise the volume too high.
• Do not use the earphones in places where the inabilityto hear ambient sound presents a serious risk (such as at railroad crossings, train stations, construction sites or on roads where vehicles and bicycles are traveling). Never use the earphones while driving a car, riding a motorcycle or bicycle or operating any other vehicle, as it may cause potential risk to your safety.
• Wireless devices can cause interference in aircraft. Please make sure that your earphones are powered off in flight.
• Follow any special regulations in force in anyarea such as hospitals and always switch off your earphones whenever it is forbidden to use it or, when it may cause interference or danger.
• Follow basic safety precautions while using the earphones.
• Stop using the earphones if you feel a tinnitus, hearing discomfort, irritation or have other adverse reactions.
• Do not subject the earphones to strong impact.
• Keep this product away from children.
• Protect this product from moisture, humidity, water and any other liquid. Avoid using/ storing it in extreme temperatures. Do not expose it to direct sunlight and sources of heat.
• Never use this device if it is damaged.
• Use only authorized accessories.
• Do not attempt to repair this device yourself. In case of damage, contact with an authorized service point for checkup/ repair.
• Turn off the earphones before cleaning.
• Clean this device with soft, slightly damp cloth. Do not use any abrasives or chemical agents to clean this product.

PRODUCT DESCRIPTION

1. LED display (charging case battery level)
2. LED indicator
3. USB port
4. micro USB port (charging)
5. LED indicator
6. Multifunctional button (MFB)

CHARGING

Earphones

1. Place both earphones in the charging case. Make sure to align the charging contacts correctly on the earphones and the charging case. Charging should start automatically.
2. During charging a red LED on the earphones is on. When the battery is fully charged, the red LED goes off.

Note: When the battery is low, there will be a voice notification issued every 30 seconds.

Charging case

1. Insert one plug of the USB cable to the micro USB port of the charging case. Insert the other plug to the compatible PC USB port or AC adapter.
2. During charging a LED on the edge of the charging case flashes. When the battery is fully charged, red LED is on.

PAIRING

1. Remove the earphones from the charging case. The earphones should turn on automatically. If the battery in the charging case is empty or if the earphones don’t not turn on automatically, turn them on manually by pressing the touch panel for approximately 3 seconds on both earphones. LED on both earphones flash alternately red and blue.
2. When the earphones pair with each other (there will be a voice notification confirming successful pairing), they will enter Bluetooth paring mode (LED on the right earphone flashes red and blue; LED on the left earphone flashes blue slowly).
3. Enable Bluetooth function on your device and search for new Bluetooth devices.
4. Select and connect with this device (SLU0062). Voice prompt indicates successful pairing. LED on both earphones flashes green.

Notes:

• The two earphones can be used independently. To pair one earphone with the device, follow the instructions above.
• Every time the earphones are switch on, they will connect to the last connected device automatically. Please note, your device must be on with Bluetooth function turned on.
• If the earphones are not connected to any device, they will automatically power off after about 3 minutes.

OPERATION

Manual power on: Press and hold the MFB on both earphones for approx. 3 seconds. Manual power off: Press and hold the MFB on both earphones for approx. 5 seconds. Play/pause: Press the MFB once on any of the earphones.
Switch tracks: Press and hold the MFB on the right earphone for 2 seconds to switch to the next track; press and hold the MFB on the left earphone for 2 seconds to switch to the previous track.
Volume control: Press the MFB on the left earphone twice to increase volume; press the touch panel on the right earphone twice to decrease volume.
Answer an incoming call: Press the MFB on any of the earphones once.
Hang up: Press the MFB on any of the earphones once.
Reject a call: Press and hold the MFB on both earphones for 2 seconds.
Redial: Press the MFB of the left earphone three times.
Enable voice assistant: Press the MFB of the right earphone three times.

SPECIFICATION

• Speaker size: 8 mm
• Frequency response: 20 Hz – 20 kHz
• Impedance: 32 Ohm
• Sensitivity: 98 dB +/- 3 dB (1 kHz)
• THD: 0,8%
• Bluetooth version: 5.0
• Bluetooth range: up to 10 m
• Bluetooth profiles: AVRCP, A2DP, HSP, HFP
• Built in microphone
• Microphone sensitivity: 40 dB
• LED display (battery level)
• Call management
• Music playback
• Ports: USB, micro USB
• Playback time: up to 2,5 hour
• Talk time: up to 2 hours
• Standby time: up to 40 hours
• Charging time:
• Earphones: approx. 40 minutes
• Charging case: up to 1 hour
• Charging voltage: 5 V / 0,2 A
• Battery capacity:
• Earphones: 2x 30 mAh
• Charging case: 800 mAh
• In set: charging case, USB cable, 2 pairs of silicone eartips

Lechpol Electronics Leszek Sp.k. hereby declares that wireless earphones SLU0062 is consistent with directive 2014/53/UE. Full text of the EU Declaration of Conformity is available at following Internet address: www.lechpol.pl
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.

Made in China for Lechpol Electronics
Leszek Sp.k., ul.
Garwolińska 1, 08-400 Miętne.
http://www.rebelelectro.com/

References

• Rebel Electro - Co weekend SuperOkazje

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>