Paul Neuhaus MI-2017-0013 EMIL Anthracite Outdoor Wall Light Instruction Manual
- June 12, 2024
- Paul Neuhaus
Table of Contents
Paul Neuhaus MI-2017-0013 EMIL Anthracite Outdoor Wall Light
Product Information
- Power: 4W
- Luminous Flux: 350 Lumens
- Lifespan: 20,000 hours
- Color Temperature: 3,000 Kelvin
- Dimensions: 15,000 x < 0.5s
- Model Number: 994040
- Input Voltage: 230V / 50Hz
- LED-Board: 4 x max. 4W
Product Usage Instructions
- Ensure the input voltage is compatible with your electrical system (230V / 50Hz).
- Install the LED-Board by connecting it to the power source.
- Position the LED light in the desired location.
- Make sure the LED light is securely attached and properly aligned.
- Switch on the power supply to activate the LED light.
- To adjust the color temperature, refer to the product’s user interface or control panel.
- The LED light will provide a luminous flux of 350 Lumens.
- Monitor the lifespan of the LED light, which is approximately 20,000 hours.
- If necessary, replace the LED-Board with a new one of maximum 4W power.
Please note that these instructions are a general guide. For more specific information or troubleshooting, refer to the complete user manual provided with the product.
SPECIFICATION
INSTRUCTION
Please let us know the
batch number (xxxxx-xx-xx-xxxxx-xxxx) for any technical questions. This can be
found on the rating plate.
LeuchtenDirekt GmbH
Olakenweg 36 • 59457 Werl
Germany
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>