WESTIN W22-0003 XTS Rock Slider Instruction Manual
- June 13, 2024
- Westin
Table of Contents
INSTALLATION INSTRUCTIONS
XTS ROCK SLIDER
APPLICATION: 2018-2022 Jeep Wrangler JL Unlimited 4dr
PART NUMBER : 42-14065
W22-0003 XTS Rock Slider
CONTENT
ITEM| QUANTITY| DESCRIPTION| TOOLS NEEDED
1| 1| XTS ROCK SLIDER DRIVER SIDE| 10MM SOCKET
2| 1| XTS ROCK SLIDER PASSENGER SIDE| 13MM SOCKET
3| 1| DRIVER MOUNT BRACKET “A”| 13MM WRENCH
4| 1| PASSENGER MOUNT BRACKET “A”| 15MM SOCKET
5| 1| DRIVER MOUNT BRACKET “B”| 15MM WRENCH
6| 1| PASSENGER MOUNT BRACKET “B”| TORQUE WRENCH
7| 1| DRIVER MOUNT BRACKET “C”| RATCHET
8| 1| PASSENGER MOUNT BRACKET “C”|
9| 6| M10 HEX HEAD CAP SCREW|
10| 6| M10 SPLIT LOCK WASHER|
11| 6| M10 FLAT WASHER|
12| 6| M8 U-NUT CLIP|
13| 6| M8 HEX HEAD CAP SCREW|
14| 6| M8 SPLIT LOCK WASHER|
15| 6| M8 FLAT WASHER|
16| 12| M6 HEX NUT|
17| 12| M6 SPLIT LOCK WASHER|
18| 12| M6 FLAT WASHER|
19| 12| M6 BOLT PLATE|
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO
PREVENT THREAD DAMAGE AND GALLING
PROCEDURE
-
Remove contents from box, verify if all parts listed are present and free from damage.
Carefully read and understand all instructions before attempting installation.
Failure to identify damage before installation could lead to a rejection of any claim. -
Starting at the front mounting location on the driver’s side, locate Driver Mount Bracket “A” (item 3), and loosely secure the bracket using the supplied M8 hardware (items 13-15). See Figure 1 & 2 for reference. Note: If a threaded hole is not present use the M8 U –Nut Clip (item 12) for the mounting location.
-
Locate the Driver Mount Bracket “B” (item 5) and Driver Mount Bracket “C” (item 7) and loosely secure them to the center and rear mounting locations. See Figures 3-4 for reference. Note: If a threaded hole is not present use the M8 U-Nut Clip (item 12) for the mounting location.
-
Insert (6) M6 bolt plates (item 19) into the XTS rock slider driver side and tape them in place.
-
Use the M6 hardware (items 16-18) to loosely attach the rock slider to the pinch weld. See Figure 5.
-
Use the M10 hardware (items 9-11) loosely secure the rock slider to the brackets. See Figures 6-7.
-
Repeat Steps 2-5 on the passenger side.
-
Align and adjust the rock sliders and mounting brackets as necessary. Tighten and torque all hardware as specified: M6 hardware to 7-8 ft-lbs., M8 hardware to 15-18 ft-lbs., and M10 hardware to 35-38 ft-lbs.
INSTALLATION COMPLETE
CARE INSTRUCTIONS
- REGULAR WAXING IS RECOMMENDED. DO NOT USE ANY TYPE OF POLISH OR WAX THAT MAY CONTAIN ABRASIVES.
- STAINLESS STEEL PRODUCTS CAN BE CLEANED WITH MILD SOAP AND WATER. STAINLESS STEEL POLISH SHOULD BE USED TO POLISH SMALL SCRATCHES.
- GLOSS BLACK FINISHES SHOULD BE CLEANED WITH MILD SOAP AND WATER.
WARNING
Failure to follow these instructions could lead to death, personal injury, and
/ or property damage.
Failure to follow these instructions could lead to death, personal injury, and
/ or property damage.
FASTENERS:
All Westin supplied fasteners must be utilized and installed in accordance
with the installation instructions and apply torque to the specifications as
defined. DOUBLE CHECK ALL FASTENERS BEFORE INITIAL USE, AND PERIODICALLY IN
THE FUTURE TO ENSURE PROPER FUNCTION AND SAFETY.
DRILLING: Most Westin products do not require drilling for installation.
If drilling is defined as required, use caution when drilling a vehicle.
FAILURE TO REVIEW AN AREA TO BE DRILLED MAY RESULT IN PERSONAL INJURY AND/OR
INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
EYE PROTECTION: ALWAYS WEAR SAFETY GLASSES OR GOGGLES DURING THE
INSTALLATION PROCESS TO AVOID PERSONAL INJURY.
MAXIMUM TOWING/CARRYING CAPACITY: (if applicable) The Westin Receiver
Hitches will have a visible tow rating label affixed directly on the product.
User should never exceed the vehicle manufacturers maximum tow and weight
rating regardless of the capacity of the hitch. FAILURE TO FOLLOW THESE
GUIDELINES WILL VOID THE WESTIN WARRANTY AND MAY RESULT IN PERSONAL INJURY
AND/OR INJURY TO OTHERS AS WELL AS VEHICLE DAMAGE.
FORCALIFORNIARESIDENTS ONLY-PROP 65 WARNING: Some products may
contain chemicals such as DEHP, which can cause cancer, birth defects or other
reproductive harm. For more info go to
www.p65warnings.ca.gov
Westin Automotive Products, Inc.
320 W. Covina Blvd
San Dimas, Ca. 91773
Thank you for choosing Westin products
for additional installation assistance please call
Customer Service 800-793-7846
www.westinautomotive.com
P.N.: 75-4214065-RevA
ECO #: W22-0003
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>